som News - Page 31 of 73 - CNX Software

October 3, 2020October 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mango-DVK OpenWrt Devkit Features 2.5GbE, WiFi 6 SoM powered by Qualcomm IPQ6000/IP6010 SoC

We’ve been covering some 802.11ax WiFI 6 embedded networking boards from Wallys Communications and Compex in the last few months, but 8devices has now entered the fray with Qualcomm IPQ6000/IPQ6010 powered Mango WiFi 6 system-in-module available in commercial or industrial temperature range, as well as as a development kit based on the module. Mango SoM supports dual-band 2×2 MiMo 802.11ax and multi-Gigabit Ethernet connectivity, features up to 2GB RAM, 256MB NAND flash, and runs OpenWrt Linux with target applications including routers, gateways, and access points. Mango SoM Specifications: SoC (one or the other) Qualcomm IPQ6000 quad-core Cortex-A53 processor @ up to 1.2 GHz with hardware NAT engine, HW crypto Qualcomm IPQ6010 quad-core Cortex-A53 processor @ up to 1.8 GHz with hardware NAT engine, HW crypto System Memory – 512MB DDR3L 512MB (up to 2GB) Storage – 32MB NOR FLASH, up to 256MB NAND flash Networking Wireless 2.4GHz 802.11 b/g/n/ac/ax WiFi […]

September 29, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Raspberry Pi CM3+ based Iono Pi Max industrial controller comes with an impressive number of I/Os

As the Raspberry Pi Compute Module 4 is only expected for next year, companies are still launching products based on Raspberry Pi Compute Module 3+ (CM3+), and Sfera Labs has just introduced Iono Pi Max industrial computer powered by a Raspberry Pi CM3+ system-on-module. Housed in a DIN rail enclosure, the Linux controller offers Fast Ethernet, three USB ports, isolated CAN and serial boards, some analog I/Os, a relay, as well as a real-time clock (RTC), integrated UPS, and more. Iono Pi Max specifications: SoM compatibility Iono Pi Max 3+ – Already fitted with Raspberry Pi Compute Module 3+ (Lite, 8GB, 16GB, or 32GB eMMC version) Iono Pi Max Solo – Barebone model compatible with Raspberry Pi Compute Module 3, CM3 Lite, CM3+ 8GB/16GB32GB, and CM3+ Lite MCU – Microchip SAME54 Cortex-M4F microcontroller with 1 MB flash, 256 KB RAM connected to the Raspberry Pi module via I2C, USB and […]

September 28, 2020September 28, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

TQ Embedded Unveils Intel Elkhart Lake COM Express and SMARC 2.1 Computers-on-Module

German technology company TQ Embedded has unveiled the TQMxE40 computer-on-module families based on the Intel Atom x6000E series, as well as Intel Pentium and Celeron N and J “Elkhart Lake” processors that comply with COM Express Mini, COM Express Compact, and SMARC computer-on-module standards. The company’s TQMxE40M, TQMxE40S, and TQMxE40C1/C2 embedded modules are offered with all twelve Intel Elkhart Lake processors, up to 64GB RAM, and a -40°C to +85°C industrial temperature range. The computers-on-module are especially suited to industrial automation, medical technology, measurement technology, robotics as well as transport and logistics applications. TQMxE40M COM Express Mini Module Specifications: SoC – Intel Atom x6000E Series or Intel Pentium and Celeron N and J Series part of Elkhart Lake family with 4.5 W to 12 W TDP System Memory – 4, 8, 16 GB LPDDR4/4x with IBECC (In-band EEC) Storage – 8 to 256 GB eMMC flash, 32kbit EEPROM COM Express […]

September 27, 2020August 13, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Lantronix Open-Q 865XR SoM Brings Snapdragon XR2 Processor Beyond Virtual Reality

Lantronix Snapdragon XR2 Development Kit

Qualcomm Snapdragon XR2 (SXR2130P) is the latest and most powerful virtual & extended reality processor from the company and Facebook recently announced it would be found in their Oculus Quest 2 standalone VR headset. But it now looks like the processor will be used well beyond virtual reality applications as Lantronix has unveiled a Snapdragon XR2 SoM with Open-Q 865XR system-on-module designed for AI boxes, video conference systems, multi-camera systems, machine vision platforms, advanced high-resolution multi-display systems, medical imaging, and handheld data collectors. Open-Q 865XR SoM Open-Q 865XR SoM specifications: SoC – Qualcomm SXR2130P (Snapdragon XR2) Octa-core processor with 1x Kryo Gold prime @ 2.84 GHz + 3x Kryo Gold @ 2.42 GHz + 4x Kryo Silver @ 1.81 GHz Adreno 650 GPU @ up to 587 MHz Hexagon 698 DSP with quad Hexagon Vector eXtensions Spectra 480 Image Signal Processor Adreno 665 Video Processing unit for decode up to […]

September 24, 2020September 24, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Congatec Unveils Atom x6000E Elkhart Lake Powered Pico-ITX SBC, Qseven, SMARC, COM Express Modules

With the announcement of Intel Elkhart Lake IoT-optimized processors, we should expect embedded systems companies to unveil their own Atom x6000E and Celeron/Pentium Elkhart Lake powered products, and one of the first to do so is Congatec with the introduction of four different Elkhart Lake computers-on-module (CoM) following Qseven, SMARC, and COM Express standards, as well as a Pico-ITX SBC. conga-PA7 Atom x6000E SBC (with Celeron/Pentium J optional) Detailed specifications: SoC – Choice of eight different Elkhart Lake processors from the 6W Atom x6211E dual-core processor to the 10W Intel Pentium J6425 quad-core processor up to 3.0 GHz, all with 10th Gen Intel UHD graphics System Memory – Up to 16GB quad-channel onboard LPDDR4x Storage 32GB or 64GB UFS 2.0 flash (optional up to 512GB) M.2 SATA/PCIe SSD support (see expansion) 32 MB serial flash for AMI Aptio UEFI firmware Video DisplayPort DP++ video output up to 4Kp60 1x USB-C […]

September 17, 2020September 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

NXP i.MX 8M Plus AI Systems-on-Modules and Devkits Launched by Variscite

NXP i.MX 8M Plus processor was unveiled at the very beginning of the year as the first i.MX processor with AI hardware acceleration provided by a 2.3 TOPS Neural Processing Unit (NPU) embedded in the chip. Apart from the upcoming Wandboard 8MPLUS SBC, we had not seen hardware powered by the new processor, but Variscite has now announced two NXP i.MX 8M Plus systems-on-modules – VAR-SOM-MX8M-PLUS and DART-MX8M-PLUS – and corresponding development kits. VAR-SOM-MX8M-PLUS CPU Module & Development Kit Specifications: SoC – NXP i.MX 8M Plus single, dual or quad-core Cortex-A53 processor clocked at up to 1.6 (Industrial/Extended) or 1.8GHz (Commercial), Cortex-M7 real-time core @ 800 MHz, 1080p H265/H264 encode/decode, AI/ML acceleration up to 2.3 TOPS, GC7000UL 3D GPU, GC520L 2D GPU System Memory – 1 to 4GB LPDDR4 Storage – 8 to 64GB eMMC flash Networking – 802.11 ac/a/b/g/n + BT 4.2/BLE module SO-DIMM Edge Connector Storage I/F – […]

September 9, 2020December 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$10 System-on-Module Drives Full HD Smart Displays via SigmaStar SSD201 SoC

SigmaStar makes some of the cheapest processors for cameras on the market such as MStar MSC313E SoC. I’ve now been informed about a new low-cost module – IDO-SOM2D01 – based on SigmaStar SSD201 dual-core Cortex-A7 Full HD SoC with 64MB embedded DDR2, 128MB flash, as well as support for Ethernet and WiFi. As far as I understand, there’s no camera input, and instead, the SSD201 processor targets applications leveraging Full HD display for the Smart Home, industrial HMI, and home control systems. Industio IDO-SOM2D01 system-on-module specifications: SoC – SigmaStar SSD201 dual-core Cortex-A7 processor @ 1.2 GHz with 2D GPU, 64MB DDR2 RAM (QFN128 package) Storage – 128MB SPI NAND flash (option up to 2GB) Video Decoder – H.264/H.265 up to 1920×1080 @ 60 fps 96x castellated holes (1.1mm pitch) with Video Output – 4-lane MIPI DSI up to 1080p60 Audio – 1x analog microphone input, 2x DMIC inputs, 1x Line […]

August 22, 2020August 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

PicoCore RT1 System-on-Module Runs FreeRTOS on NXP i.MX RT1050 Crossover Processor

F&S Elektronik Systeme PicoCore RT1 is a System-on-Module powered by NXP i.MX RT1050 crossover processor designed to offer the real-time capabilities of microcontrollers and the performance of application processors thanks to an Arm Cortex-M7 core clocked at up to 600 MHz. The 40×35 mm module is also equipped with 32MB SDRAM, 256MB “high-reliability QSPI NOR flash, and 16KB EEPROM, and offers various interfaces including Ethernet, RGB LCD, and USB via board-to-board connectors. PicoCore RT1 (V1) SoM specifications: SoC – NXP i.MX RT1050 Arm Cortex-M7 processor @ up to 600 MHz with 32KB L2 cache, 2D graphics accelerator System Memory – 32MB SDRAM Storage – 256MB QSPI Flash, 16KB EEPROM; optional NAND flash 2x 80-pin board-to-board connector with Storage – SD Card Display – 16-bit RG interface, analog resistive and PCAP touch via I2C Networking – 1x 10/100M Ethernet Audio – Line-In, Line-Out, microphone, headphone, I2S USB – 1x USB 2.0 […]