Fleye is a Safe, Robust and Developer Friendly Drone Powered by NXP i.MX6 Processor (Crowdfunding)

In most cases, it’s a pretty bad idea to touch a drone while it’s flying, as you could potentially hurt yourself and others with the blades, so a startup based in Belgium has decided to design a safe drone with the blades hidden under a shell surrounded by protective grids, and with features such as obstacles avoidance. The design also makes the drone sturdier, and less prone to breakage should it fall or hit obstacles. The drone, dubbed Fleye, is based on NXP i.MX6 dual core processor, runs a Linux OS built with the Yocto Project, and the company also plans to provide APIs, and mobile SDKs to allow the developer community to experiment with the drone, and/or create mobile apps.

FleyeMain hardware features of Fleye drone:

  • SoC – Freescale NXP i.MX6 dual or quad core ARM Cortex A9 processor @ 800 MHz with Vivante GPU
  • System Memory – 512 MB (1GB as option)
  • Storage – micro SD slot
  • Connectivity – WiFi up to 100 meters range
  • Camera – 5MP camera up to 1080p @ 30 fps (omnivision 5640 sensor)
  • Sensors – 3-axis accelerometer, gyroscope, magnetometer, sonar, optical flow tracking via bottom camera, altimeter, and GPS
  • Flight – 15 km/h max speed; 8km/h wind tolerance; -/+ 10 cm hovering precision
  • Battery – 1,500 mAh LiPo battery with XT60 connector; good for 10 minutes of flight time
  • Dimensions – 23 cm diameter
  • Weight – 450 grams

The Fleye will ship with a dual core processor, but a special Developer Edition will come with NXP i.MX6 Quad and 1GB RAM instead. The drone is flown with a mobile app running on iOS and Android, and does not require piloting skills, and you just need to select a camera mode such as selfie or virtual tripod before watching the video stream on your mobile device. It’s also possible to control it manually with a virtual gamepad, or an actual Bluetooth gamepad for more control. Since the blade are not exposed, the drone can be pushed around if it is on the way. You can find out more in the video below.

The board uses OpenCV for its obstacle avoidance algorithm, and some more complex apps can be accelerated with OpenGL or/and OpenCL thanks to Vivante GPU. The full APIs and SDKs have not been publicly released yet, but here what you may expect:

  • JSON-over-UDP API to control the drone over WiFi from any network capable computing device.
  • Android & iOS SDK
  • Nodejs and/or Python SDK

Since the main board runs Linux, you’ll be able to write your own applications, and access it via SSH. A different API will also be provided in order to instruct the auto-pilot to take off, land, go to specific GPS coordinated, etc… from your own application(s).

Fleye drone is on Kickstarter, and so far has raised around 100,000 Euros out of its 175,000 Euros target. The super early bird rewards are all gone, but some early bird rewards are still available, and a 699 Euros (~$738) pledge, shipping included, will hopefully get your the drone in September 2016.  You may also find more details on gofleye.com and their blog.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX RK3588 mini-ITX motherboard

4 Replies to “Fleye is a Safe, Robust and Developer Friendly Drone Powered by NXP i.MX6 Processor (Crowdfunding)”

  1. This seems a bit like an overkill, to have a dual core A9 board on a drone. Power usage is also not quite that good for it. I’d rather have something with lower power like a dual core 500 MHz MIPS with no GPU… a VPU would still be needed but the GPU is useless for a drone, unless you can do image recognition and stuff like that.

Leave a Reply

Your email address will not be published. Required fields are marked *

Khadas VIM4 SBC
Khadas VIM4 SBC