LinkSprite O-board Altera Cyclone IV FPGA Development Board Targets OpenRISC Development

OpenRISC project‘s goal is to create a free and open processor for embedded system that include  RISC instruction set architecture with DSP features, an open source implementations of the architecture, open source development tools and software, and simulators. You normally need FPGA board to emulate the processor before silicon is made available, so LinkSprite designed the O-board powered by Altera Cyclone IV FPGA to help with OpenRISC development and evaluation.

O-BoardO-board specifications:

  • FPGA – Altera Cyclone IV E with 22K LUT (P/N: EP4CE22F17C8N)
  • System Memory – 32MB SDRAM
  • Storage – 1MB SPI FLASH, micro SD slot
  • Connectivity – 1x Fast Ethernet (RJ45)
  • USB – 1x micro USB for OTG HOST/SLAVE, 1 x micro USB for power supply, configuration, 2x UARTs, 2x JTAG…
  • Expansion connectors – 2x 70-pin headers
  • Power Supply – 5V via miro USB
  • Dimensions – 96 x 40 mm

OpenRISC_FPGA_BoardThe Wiki for the board explained how to get started with development with a Ubuntu image for VirtualBox pre-loaded with all necessary tools and files to program the FPGA and then boot Linux on OpenRISC processor emulated on the FPGA.

O-board is sold for $179 on CuteDigi store and $185 on Amazon US.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX RK3588 mini-ITX motherboard

2 Replies to “LinkSprite O-board Altera Cyclone IV FPGA Development Board Targets OpenRISC Development”

  1. Kinda expensive for what it is, there are plenty of Xilinx FPGA boards with bigger faster DRAM (DDR2/3), more ports ect that are cheaper than this. The advertisement that is below the box I’m entering this comment is a Zynq (2 ARM cores + 1GB DDR3 + FPGA + USB + Ethernet + HDMI) for $99

  2. Hehe, makes me want to continue on my thesis work:
    http://opencores.org/project,orsoc_graphics_accelerator

    It’s a graphics accelerator for the OpenRISC. There is also Linux support for the openRISC and Samsung used the core in some of their TVs, but there is cheaper boards available and there are also more boards like the above specificly made for the OpenRISC.

Leave a Reply

Your email address will not be published. Required fields are marked *

Boardcon Rockchip and Allwinner SoM and SBC products
Boardcon Rockchip and Allwinner SoM and SBC products