Giveaway Week – ANAVI Gas Detector Starter Kit

Leon ANAVI makes from fun little boards for home automation, either ESP8266 based, or pHAT for Raspberry Pi boards. Earlier this year, I wrote about my experience getting ANAVI Gas Detector with Home Assistant.

Now that’s I’m done, I’m giving away the starter kit that includes the ESP8266 board, an acrylic case, an OLED display, a USB to serial adapter, and MQ135 air quality sensor.

Anavi Gas Detector Starter Kit Unboxing
Click to Enlarge

The board is open-source hardware, meaning everything is open source from the KiCAD files to the Android sketch running on the board.

It’s very easy to get started, as you can just connect a USB cable for power, and after configuring WiFi you can see the air quality  – either Poor, Moderate or Good – displayed on the OLED display, and you can easily see the data in a web dashboard after setting up Home Assistant.

ANAVI ESP8266 Gas Detector Display

Everything shown in the top photo will be given away to one lucky winner.

To enter the draw simply leave a comment below. Other rules are as follows:

  • Only one entry per contest. I will filter out entries with the same IP and/or email address.
  • Contests are open for 48 hours starting at 10 am (Bangkok time) every day.
  • Comments will be closed after 48 hours. If comments are open, the contest is still going on.
  • Winners will be selected with random.org and announced in the comments section of each giveaway.
  • I’ll contact the winner by email, and I’ll expect an answer within 24 hours, or I’ll pick another winner.
  • Shipping
    • $7 for registered airmail small packet for oversea shipping payable via PayPal within 48 hours once the contest (for a given product) is complete.
    • If Paypal is not available in your country, you can still play, and I’ll cover the cost of sending the parcel by Sea and Land (SAL) without registration if you win.
  • I’ll post all 7 prizes at the same time, around the 14th of November
  • I’ll make sure we have 7 different winners, so if you have already won a device during this giveaway week, I’ll draw another person.

If you don’t end winning this sample, ANAVI Gas Detector Starter Kit is also available on Crowd Supply as pre-order for $39.

Make sure to come back on Saturday and Sunday, as there will be some other interesting kits for grab this week-end.

Share this:

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX RK3588 mini-ITX motherboard
97 Comments
oldest
newest
Chetan
5 years ago

I’m in

Cristhian Palma Macay
Cristhian Palma Macay
5 years ago

Participando

Naveen Kumar
Naveen Kumar
5 years ago

Great! Hoping to win…

Jim st
Jim st
5 years ago

I’m in

s k
s k
5 years ago

This could be useful…

Hong Shen
Hong Shen
5 years ago

I like this one.

Sebastian
Sebastian
5 years ago

I’in

Yigido
Yigido
5 years ago

I’m in

Karpiu
Karpiu
5 years ago

I’m in 🙂

Radist
5 years ago

I’m in

Nguyen Tung
Nguyen Tung
5 years ago

I’m in

Dmytro Tokarskyy
Dmytro Tokarskyy
5 years ago

I’m in

Pas Mane
Pas Mane
5 years ago

IT@ly
cnn++

Sergej Komov
Sergej Komov
5 years ago

Count me in!

Juanjo
Juanjo
5 years ago

Me apunto!

Amanda
Amanda
5 years ago

This is cute

Mati
5 years ago

In

Nikola
Nikola
5 years ago

Thank you!

Luigi Morelli
5 years ago

Oh please select me! We are ready to use and tell about it!

Kubo
Kubo
5 years ago

This one I would love to have

Nikolaos Monios
Nikolaos Monios
5 years ago

Nice one! Good luck all!

Kovacs Robert
Kovacs Robert
5 years ago

I’m in

Domenico Sgarbossa
5 years ago

Here I am

Pablo Martínez
Pablo Martínez
5 years ago

Nice project. I’m in

Marcin
Marcin
5 years ago

I’ll use it in my SmartHome. 🙂

petur
petur
5 years ago

I’m in

zmlopez
zmlopez
5 years ago

I’m in

Migsu
Migsu
5 years ago

Hi Cnx software

Andrius Kurtinaitis
Andrius Kurtinaitis
5 years ago

+

Dean Shorter
Dean Shorter
5 years ago

Yes please!

Erik
Erik
5 years ago

I wanted to play around with air quality a long time. This would be a nice start.

Branko
Branko
5 years ago

Here!

S Yousuf Imam
S Yousuf Imam
5 years ago

The 5th day

Malik Cissé
Malik Cissé
5 years ago

Getting there.

Lachezar
Lachezar
5 years ago

I want one!

Mehdi Hadadian
Mehdi Hadadian
5 years ago

Great!

Thomas Soe
Thomas Soe
5 years ago

I’m in.

k.c.
5 years ago

+1

TLS
TLS
5 years ago

Why not

Michal
Michal
5 years ago

I’m in !

Dost Muhammad Shah
5 years ago

I need it

5 years ago

Yes please!

IvanPtr
IvanPtr
5 years ago

I need..

hal2069
5 years ago

I’m in

Mat
Mat
5 years ago

It’s a gas!

Virtual
Virtual
5 years ago

Thx

opk
opk
5 years ago

Count me in

Zhongfu
Zhongfu
5 years ago

I’m in!

LeoKesler
5 years ago

Thanks.

Bumsik Kim
Bumsik Kim
5 years ago

I’m in!

Venet
Venet
5 years ago

Great kit! I’m in!

florian
florian
5 years ago

count me in

Joe
Joe
5 years ago

In.

Rohit
Rohit
5 years ago

Did this comment peek your interest enough so you can give me something.

Dimitris C
Dimitris C
5 years ago

Good luck everyone

sirrab
sirrab
5 years ago

Pick me, pick me!

roel
roel
5 years ago

interesting.

Sébastien
Sébastien
5 years ago

i’m in

Tim
Tim
5 years ago

Count me in!

Michael Regenmacher
5 years ago

in

kdayns
kdayns
5 years ago

In too.

aardvark102
5 years ago

This would be a nice addition to the smart termostat I am building.

Michael Phillips
Michael Phillips
5 years ago

I could sure use this in my basement.

Indy
Indy
5 years ago

In!

Solmis
Solmis
5 years ago

Here goes nothing

Matt
Matt
5 years ago

Not really sure i want to know how bad the air is, but ok

Piotr
Piotr
5 years ago

Count me in, please.

Suzie Hawley
5 years ago

Neat! BTW- I enjoy your articles & contests. Thanks!

Greg Dalton
5 years ago

Aww yisss!
????‍?

Caio Pedreira
Caio Pedreira
5 years ago

I’m in!!

uibo
5 years ago

in it

shen yi
shen yi
5 years ago

interested in the product

Rainer
Rainer
5 years ago

Also in.

Jesper Nielsen
Jesper Nielsen
5 years ago

Looks like a nice thing for the office 🙂

Viktor
Viktor
5 years ago

Would be nice edition in my smart home

Xtract
Xtract
5 years ago

This would look awesome just on top of my 3d printer!

Patrice Tisserand
5 years ago

I’m in

Shanduur
Shanduur
5 years ago

I’m in!

Garrett
5 years ago

I’m in!

James Hodgkinson
5 years ago

Ooh, this device is fascinating, sign me up!

jiyan
jiyan
5 years ago

Nice

Chi
Chi
5 years ago

I’m in

Suriyan Laohaprapanon
Suriyan Laohaprapanon
5 years ago

Count me in, thanks!

h4med
5 years ago

Hi, I am in!

Jerry
Jerry
5 years ago

I’m in 🙂

codrut
codrut
5 years ago

nice one 🙂

Jay
5 years ago

Hope to win for once!

Eld
Eld
5 years ago

Joining!

AMIT JAIN
AMIT JAIN
5 years ago

Count me in.

Freddy Armstrong
Freddy Armstrong
5 years ago

in

errepunto
errepunto
5 years ago

I’m 8n

frosty
frosty
5 years ago

looks useful 🙂

Kwlee
Kwlee
5 years ago

I’m in

OKG
OKG
5 years ago

Cool

Magnus
Magnus
5 years ago

I am feeling particularly gassy

Wenle Z.
Wenle Z.
5 years ago

Count me in.

Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...