Linux Category - Page 351 of 551 - CNX Software

February 10, 2016February 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

STMicro Releases Linux based STM32 MCU Development Tools

Until a few years ago, most development tools for micro-controllers were only available for Windows, but as Linux gained popularity among developers and engineers, community of developers designed development tools running in Linux, but only a few companies are providing tools that run on Linux operating systems. The good news is that STMicro has just announced the release of STM32CubeMX configurator and System Workbench for STM32, for both Linux and Windows, with Mac OS supporting coming on Q2 2016. Developped by Ac6 embedded systems company, System Workbench for STM32 relies on Eclipse IDE, supports the ST-LINK/V2 debugging tool under Linux through an adapted version of the OpenOCD project, and can be used with various STMicro STM32 boards including Nucleo boards, Discovery kits, and other Evaluation boards. You can give it a try by visiting OpenSTM32 Community, but for some reasons they ask you to register before accessing the installation instructions. […]

February 8, 2016February 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$98 Geek Force Mediatek MT7623 Router Board Features 6 GbE Ports, 3 mPCIe Slots for WiFi, 3G, or LTE (Crowdfunding)

We’ve seen a few interesting and relatively powerful router board launched last year, with the likes of MQMaker WiTi or Turris Omnia, AsiaRF has now designed Geek Force board powered by Mediatek MT7623N/MT7623A quad core network processor combined with 2GB RAM, six Gigabit Ethernet ports, and optional 802.11ac and 3G connectivity via the three mPCIe slots available on the board. The board also features two HDMI ports, and supports multimedia capabilities such as H.264, MPEG-2, or VC-1 hardware video decoding. Geek Force board preliminary specifications: SoC – MediaTek MT7623A or MT7623N quad-core ARM Cotex-A7 @ 1.3GHz with Mali-450MP GPU (MT7623N only) System Memory – 2GB DDR3 Storage – 2GB eMMC or NAND Flash + SD card slot up to 128 GB, and maybe SATA via the mPCIe slots Connectivity – 6 Gigabit Ethernet ports (WAN / LAN behavior defined by firmware), 802.11 b/g/n WiFi & Bluetooth 4.0 via MT6625L with […]

February 5, 2016March 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

BQ Aquaris M10 Ubuntu Edition Tablet is the First Ubuntu “Convergence” Device

Three years ago, Canonical unveiled their plan to develop Ubuntu for Tablets with support for both tablet mode and full desktop convergence, but development took longer than expected, and in the meantimes some companies launched tablets without real mobile / desktop convergence, such as Cube i7-CM or Mastermind UT One, non of which were really successful. However, with the upcoming Ubuntu 16.04 “Xenial Xerus” LTS release, Canonical has worked it out, and the company cooperated with BQ to develop Aquaris M10 Ubuntu Edition tablet the feature both mobile and desktop modes. BQ Aquaris M10 Ubuntu edition specifications: SoC – MediaTek MT8163A ARM Cortex-A53 quad-core processor @ 1.5 GHz with ARM Mali-T720MP2 GPU System Memory – 2GB RAM Storage – 16GB storage + microSD card slot for up to 64GB of removable storage Display – 10.1″ multitouch screen; 1920×1200 resolution Video Output – micro HDMI output Audio – Frontal speakers, 3.5mm […]

February 4, 2016April 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

FriendlyARM NanoPC-T2 Board Gets More Storage, WiFi & Bluetooth, Stays Cool, and Costs Less

FriendlyARM NanoPC-T1 board powered by Samsung Exynos 4412 processor with 1GB RAM and 4GB eMMC flash was unveiled at the start of 2014 for $69. The company has now announced NanoPC-T2 with Samsung S5P4418 processor with 1GB RAM, and 8GB Flash, as well as WiFi and Bluetooth, as Gigabit Ethernet all of which were missing in the first version. NanoPC-T2 also has a power management chip, and a larger heatsink, meaning that it does not suffer from overheating like NanoPi2 according to FriendlyARM. NanoPC-T2 specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz with Mali-400MP GPU System Memory – 1GB 32bit DDR3 RAM Storage – 8GB eMMC flash, and 1x SD card slot (on the bottom of the board) Connectivity – Gigabit Ethernet, 802.11 b/g/n WiFi and Bluetooth LE 4.0 (Ampak AP6212) with on-board chip antenna and 1x IPX antenna connector Video Output / Display […]

February 4, 2016February 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Olimex H3-OLinuXino-NANO is a Smaller Allwinner H3 Board with HDMI, Ethernet, and Many I/Os

Allwinner H3 processor is quite popular in development boards thanks to some of Shenzhen Xunlong’s Orange Pi boards such as Orange Pi PC or Orange Pi One. However, some specific features may not work 0ut of the box, or are undocumented, so it’s always a plus when more companies create boards for a platform, and that’s exactly what Olimex has done with H3-OlinuXino-NANO, a board that’s smaller than any Orange Pi boards, the first open source hardware Allwinner H3 board on the market, and featuring many more I/O pins available. Olimex H3-OlinuXino-NANO specifications: SoC – Allwinner H3 quad core Cortex-A7 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 512MB of DDR3 RAM Storage – micro SD card slot Video Output- HDMI up to 1080p60 Connectivity – 10/100M Ethernet USB – 2x USB host ports + 1x micro USB OTG port Expansion – Optional 2x 40-pin headers with GPIOs, […]

February 3, 2016February 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 57 Comments

Hardkernel ODROID-C2 64-Bit ARM Development Board to Sell for $40 Next Month

We previously knew ODROID-C2 was in development thanks to a document and source code from Amlogic themselves. We did not have the full details at the time, and Amlogic’s document even got the RAM capacity wrong. Hardkernel has finally announced ODROID-C2 development board based on Amlogic S905 will be selling on March 2016 for $40, and released specifications and some photos. ODROID-C2 specifications: SoC – Amlogic S905 quad core cortex-A53 processor with 3+2 cores Mali-450 GPU System Memory – 2GB DDR3 SDRAM Storage – eMMC module socket with 8, 16, 32, or 64GB module by Toshiba or Sandisk + micro SD slot supporting UHS-1 SD cards. Video Output – HDMI 2.0 Connectivity – Gigabit Ethernet (Realtek RTL8211F) USB – 4x USB 2.0 host ports + micro USB OTG port Expansion Header 40-pin header with GPIO, I2C, UART, and ADC ; All I/Os are 3.3V, except ADC that is limited to […]

February 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

WeTek Play Now Supports OpenPLi Open Source Linux Distribution for DVB Receivers

WeTek Play satellite receiver was initially launched with Android and OpenELEC support, but the community started to provide other operating systems such as Ubuntu, Elementary OS, Lakka and Enigma 2, and the hardware is even used to receive educational materials or emergency info via satellite thanks to Outernet project. The device now support OpenPLi Linux based distributions for DVB receivers. If you want to try, you can download one of the latest images of OpenPLi for WeTek Play by loading the firmware onto an SD card. Bear in mind that official has just started so some features may not be implemented, and OpenPLi documentation specific to WeTek Play is basically inexistent. Support is available on the forums. If you want to get an idea about what OpenPLi is capable, you may however check out th list of specific features in the wiki, including PLi Movieplayer to allow you to playback […]

February 2, 2016February 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

AAEON BOXER-6404 Bay Trail Embedded Computer Comes with 4 GbE Ports, 2 HDMI Outputs

AAEON has recently launched BOXER-6404 embedded box PC suitable to industrial application, powered by Intel Celeron J1900 “Bay Trail-D” or Celeron N2807 “Bay Trail-M” processor, with up to 8GB RAM, a CFast slot, four Gigabit Ethernet ports, and to HDMI outputs. BOXER-6404 mini PC specifications: SoC Intel Celeron J1900 quad core processor @ 2.0 / 2.42 GHz with Intel HD graphics (10W TDP) OR Intel Celeron N2807 dual core processor @ 1.58 / 2.16 GHz with Intel HD graphics (5W TDP) System Memory – 1x 204-pin DDR3L SODIMM slot for up to 4GB RAM with N2807), and up to 8GB RAM with J1900 Storage – CFast Slot Video and Audio Output – 1x or 2x HDMI ports Connectivity – 2x or 4x Gigabit Ethernet RJ45 ports USB – 2x USB 2.0 ports, 1x USB 3.0 port Serial – 1x RS232 DB9 port Expansion – 1x mini card with USB interface […]