Linux Category - Page 360 of 555 - CNX Software

December 18, 2015December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

DietPi is Lightweight, Easy to Use Debian Based Distribution for Raspberry Pi, ODROID, and Orange Pi Boards

Raspberry Pi, Hardkernel ODROID, and Orange Pi are some of the most popular and cost effective development boards on the market today, and one British developer, going under Fourdee nickname, has released a lightweight distribution called DietPi working for all Rasbperry Pi boards, ODROID-C1(+), ODROID-XU3/XU4, and Orange Pi PC, with Orange Pi 2 and Orange Pi Plus support coming soon, as well as a VMWare virtual machine also available for evaluation. The compressed downloads are about 80 to 100MB depending on the target, the image that can be dump with dd or Win32DiskImager requires a 1GB or greater micro SD card as the image itself is about 500MB large, Internet access (Ethernet or Wifi), and optionally a USB Drive to allow installation on a USB drive for better performance, which of course does not apply if you have an eMMC module with your ODROID board. The image also contains some […]

December 16, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$15 pcDuino3 Nano Lite Board Includes Gigabit Ethernet and a Real SATA Port

I often read people complain about the lack of SATA and Gigabit Ethernet on devices, and following up a discussion on a recent post about QNAP TAS-168 and TAS-268 NAS, I was made aware that pcDuino3 Nano board had a little brother without NAND Flash, nor an IR receiver that’s currently selling for $15 on Amazon US. pcDuino3 Nano Lite board specifications are exactly the same as the other version minus the stricken-through items: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1.0 GHz with Mali 400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, SATA connector and microSD card slot (up to 32GB) Video Output – HDMI 1.4 with HDCP support Audio Out – 3.5mm analog audio interface Connectivity – Gigabit Ethernet USB – 2x USB host, 1x USB OTG Expansion Headers – Arduino UNO extension interface with 14xGPIO, 2xPWM, 6xADC, 1xUART, 1xSPI, 1xI2C. […]

December 15, 2015December 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Aceberry S500 is a $60 Actions Semi S500 Development Board Comprised of a Module and a Baseboard

For some hard-to-explain reasons, Actions Semi S500 processor seems to be a popular choice for makers of boards, although I don’t think it has really been a success with hobbyists and makers so far. After ActDuino S500, LeMaker Guitar, Lemon Pi, Allo SPARKY, and Roseapple Pi boards, here comes another S500 quad core Cortex A9 development board with Aceberry S500 that’s quite inspired by LeMaker Guitar as seen by its baseboard and module design. Aceberry S500 board preliminary specifications: SoC – Actions Semi S500 quad core Cortex A9r4 processor @ 1.6GHz with PowerVR SGX544 GPU @ 500 MHz Memory – 1 GB DDR3 Storage – 8GB eMMC or NAND flash (16 and 32GB optional), SPI NOR flash Video Output – HDMI, and LCD connector Audio – HDMI, headset jack, digital output (RCA). Video Codec – H.265 (HEVC) and Ultra HD (4K*2K) video playback. Encoding up to 1080p@60fps. Connectivity – 10/100M […]

December 15, 2015December 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

How to Root Amlogic S905 based MINIX NEO U1 Box in Windows and Linux

MINIX NEO U1 is a great device, but if you have some apps that require root access, the firmware is not rooted by default. AndroidPC.es just posted instructions to root the device in Windows, and I’ve also adapted Daemonium’s batch script for Windows as a shell script in order root the device from Linux. Please note that this will break OTA firmware update, so you’ll have to upgrade firmware manually after rooting. The most steps are common between Linux and Windows Enable Developer options, by going to Settings->Advanced Settings->About Mediabox, and click 6 or 7 times in the Build number section, until the new menu is enabled. Go back once, and access Developer options to make sure USB debugging is enabled Now go to Settings->Network to check and note your IP address (WiFi or Ethernet) Download and extract AndroidPC.es_MINIX_NEO_U1_root_v01_Daemonium.zip They also asked to install WiFi adb in your system, but I […]

December 14, 2015December 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

QNAP TAS-168 and TAS-268 are NAS Running Android and Linux based QTS on Realtek RTD1195 Processor

QNAP has recently launched two network attached storage (NAS) devices with TAS-168 and TAS-268 that are based on Realtek RTD1195 dual core processor, and happen to run Android along side the company’s Linux based QTS operating system, and respectively have one and two bays for 2.5″ or 3.5″ hard drives. QNAP TAS-168 and TAS-268 specifications: SoC – Realtek RTD1195 dual core ARM Cortex A7 processor @ 1.1 GHz with Mali-400MP2 GPU System Memory – 2 GB DDR3 Storage 4 GB eMMC and SD card slot TAS-168 – 1x 2.5″ or 3.5″ SATA @ 3Gbs TAS-268 – 2x 2.5″ or 3.5″ SATA @ 3Gbs Video and Audio Output – HDMI port Connectivity – Gigabit Ethernet USB – 1x USB 3.0, 4x USB 2.0 host ports Misc – IR receiver, LEDs for HDD, LAN, status, and USB, buttons (Power, reset, USB copy) Power – TAS-168 – 12V/3A (36W) power adapter; TAS-268 – 12V/5A […]

December 11, 2015December 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Rikomagic MK36SLE (Linux Edition) Based on Intel Atom x5-Z8300 Processor Runs Ubuntu 15.04

When people think about Linux on Intel platform, they often believe it’s just as easy as flashing an Ubuntu ISO on a USB stick and install it on their computer. While that’s true for desktop or laptop processors, the low power Intel Atom processors for tablets such as Bay Trail-T or Cherry Trail are not well supported in Linux with various issues ranging from an incompatible UEFI binary to a complete lack of audio support. So far, most companies have not provided a decent version of Atom Z3735F or Atom x5-Z8x00 mini PCs with Linux, and all the work has been done by the community such as this Ubuntu 14.04 image for Atom Z3735F. But Rikomagic must have worked on a Cherry Trail Linux port, more exactly Ubuntu 15.04, for their MK36S Cherry Trail mini PC, and has now launched MK36SLE (Linux Edition). [Update: While most features are currently workings, […]

December 11, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Light Biz OS Firmware, Android and Ubuntu Image, and Android SDK Released for GeekBox (RK3368)

GeekBox is an upcoming Android TV box based on Rockchip RK3368 octa-core processor that doubles as a system-on-module and development board. The company has now uploaded the Android 5.1 SDK, including Linux 3.10.79 kernel, on github. It’s not for the Android SDK for RK3368, but at least it’s not just an outdated tarball, and will hopefully be regularly updated directly on github. Beside the source code, the company also released three firmware image including Rockchip’s Light Biz OS desktop operating system based on Lollipop: Biz OS for GeekBox – V151208 (8th of December 2015) Android and Lubuntu dual boot image – V151129 (29th of November 2015) Android 5.1 image – V151129 (29th of November 2015) It’s quite possible those images will also work on other Rockchip RK3368 platform with some modifications, e.g. an updated device tree file for a given hardware. I’ve downloaded Biz OS adn the dual boot image, […]

December 10, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Allwinner A64 Android 5.1 SDK and Linux Source Code

Allwinner A64 is likely to become quite popular as it will be used in PINE A64 board, Olimex open source hardware laptop featuring A64-OLinuXino board, and some low cost tablets. We’ve already got some documentation such as Allwinner A64 datasheet and user’s manual, but AFAIK, there was no source code released for the board. The good news is that you can now download Android 5.1 SDK and Linux source code on Baidu with four files available: lichee_A64_A5.1_V1.0.tar.gz – Linux source code android_A64_A5.1_V1.0.tar.gz– Android 5.1 SDK android_prebuilts_A64_A5.1_V1.0.tar.gz – Some pre-built binaries for Android A64硬件资料.zip – Documentation including the datasheet, product brief, and user’s manual which we’ve already got, but also some hardware with reference schematics, PCB layout files, and BoM for an Allwinner A64 tablet. That’s about 7.4GB to download, and apart from the documentation, the download is not quite complete yet, so I could not look into the details of […]