Linux Category - Page 390 of 555 - CNX Software

March 27, 2015March 27, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 15.03 Release with Linux 4.0 and Android 5.1

Linaro has just announced their 15.03 release with Linux 4.0-rc4 (baseline), Linux 3.10.72 and 3.14.36 (LSK), and Android 5.1. The organization has worked on hardware platforms from members namely Qualcomm, ARM, HiSilicon, Samsung, and STMicro, including the recently announced 96Boards boards, and other ARMv8 platforms. Highlights of the release: Linux Linaro 4.0-rc4-2015.03 updated linaro-android topic added a few build/boot fixes for Arndale (llct-misc-fixes topic) GATOR topic: version 5.20.1 updated integration-linaro-vexpress64 topic by ARM LT (FVP Base and Foundation models, and Juno support) updated topic from Qualcomm LT (ifc6410 board support) simple EEPROM framework (via Qualcomm LT’s topic) updated topic from HiSilicon LT (Hi36xx, HiP04, and X5HD2 families support) rebased “ILP32 patch set v3” onto 4.0-rc2 Linaro builds of AOSP 15.03 updated all the baselines to AOSP 5.1 added commit based trigger feature to CI builds Linaro OpenEmbedded 2015.03 integrated Linaro GCC 4.9-2015.03 dismantled meta-aarch64 layer created meta-ilp32 layer cleaned out […]

March 26, 2015March 26, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

KEECOO 1080p Wi-Fi Action Camera Goes for $49.99 (Promo)

KEECOO is yet another full HD action camera with Wi-Fi connectivity that provides most of GoPro functionalities, and while it normally sells for about $90 to $95 on sites like GeekBuying or GearBest, Focalprice is currently offering a steep discount by selling it for just $49.99 for a limited time period (1 day remaining). It looks like they changed their mind, and it’s now $79.99… Keecoo sports camera features and specifications: SoC – Alpha Imaging Technology AIT8427 32-bit processor @ 500 MHz Storage – micro SD slot up to 32GB – Class 6 or above recommended LCD screen – Tiny grayscale LCD display on the front Camera 12MP CMOS 170° wide angle lens; LENS F2.8 , f=4.93mm, M12, 7G+1IR Image resolutions: 4000×3000(12M) 2592×1944(5M) 2048×1536(3M) 1600×1200(2M); JPEG format Video resolutions: 1080p30fps, 720p60/30; H.264 video codec, AAC audio codec, MOV container. Video Output – mini HDMI and AV out (PAL / NTSC) […]

March 23, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Allwinner CedarX Media Codec Library GPL/LGPL Compliance Update

Last month, I wrote about potential open source licenses and VP6 copyright infringement by Allwinner with their CedarX media codec library, and then since there’s been a few developments. First, Allwinner sent me an email saying they’ve now updated Cedarx library and referring my previous article. Here’s an extract: Here, I have some update of the Allwinner’s open-source status. We have done a lot of discussion with the developers from the linux-sunxi communication about the software license of CedarX. For each question or requirement asked by the developers, Allwinner has identify and try to give the best solution. Now, we believe Allwinner’s CedarX license is fully compliant and resolves concerns from the community. And you can take the announcement https://www.mail-archive.com/linux-sunxi@googlegroups.com/msg10597.html as a reference. Allwinner is always supporting the open-source, and try to do better and better. You can see some update on the github https://github.com/allwinner-zh, and some feedback from developers: […]

March 23, 2015March 23, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

How to Install Ubuntu 14.04 on Acer Aspire E5 Laptop

I’ve been owning an Acer Aspire One D255E netbook with a 10″ display, an Intel Atom N455 processor and 1GB RAM that served me well during my travels, but as I’ve become older and less patient, I felt I needed to upgrade it. I planned to spend around 10,000 Baht (~$300), wanted a 14″ display, one of the low power CPU such as Intel Bay Trail-M or AMD Mullins / Beema processors, at least 500GB storage, 4GB RAM, and the ability to install Ubuntu. Finally, after going through several products at my local shop, I had to chose between Acer Aspire E5-411-P3CL with a 7.5W TDP Intel Atom N3540 and Acer Aspire E5-421G-45L0 with a 15W TDP AMD A4-6210 processor that both sell for 11,900 Baht ($365). Despite my preference for processor with lower TDP, I still went with the AMD system, since the performance is a little better, the […]

March 21, 2015March 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Orange Pi 2 Allwinner H3 Quad Core Development Board Sells for $35

After Orange Pi Plus development board powered by Allwinner H3 quad core cortex A7 processor, the company has decided to launch a lower cost version of their Allwinner H3 board with Orange Pi 2, that has started selling for a compelling $35 + about $4 shipping worldwide, and provides another sub-$50 alternative to Raspberry Pi 2, ODROID-C1, and Radxa Rock Lite boards. Orange Pi 2 board specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.6 GHz with 256KB L1 cache, 1MB L2 cache, and an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – micro SD card slot (up to 64GB) Video Output – HDMI, AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek module) USB – 4x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin […]

March 20, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cloudsto Embed+ RK3288 is a Rockchip RK3288 Board for Digital Signage and Point-of-Sale Applications

As Rikomagic launched their MK80LE (Linux Edition) mini PCs on Cloudsto a few days ago, I also noticed a new page entitled embed+ RK3288, which described what should be the first board sold by Rikomagic/Cloudsto. The Rockchip RK3288 based board can be used as an Android & Linux development board, but it appears to mainly target OEMs for applications such as digital signage, point-if-sale, and web kiosks. Rikomagic embed+ RK3288 specs: SoC – Rockchip 3288 quad core ARM Cortex A17 up to 1.8 GHz with Mali-T764 GPU supporting OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory – 2G DDR3 Storage – 8 to 32 GB eMMC flash. The daughterboard adds an SD card slot. Video / Display interfaces – HDMI 2.0, LCD interfaces (backlit, power, data) Audio Output – HDMI, 3.5mm earphone / audio output jack, and built-in microphone. Connectivity – 802.11 b/g/n Wi-Fi , and Bluetooth 4.0 (external). Gigabit LAN via a daughterboard. USB […]

March 20, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Xilinx Zynq-Z7015 FPGA + ARM based System-on-Modules Include High Speed Transceivers

There’s a fair amount of low cost boards powered by Xilinx Zynq Z-7010 and Z-7020 with dual core Cortex A9 processor and Artix-7 FPGA, but those who wanted to have PCIe ports or high speed transceivers had to go with the higher-end Xilinx Z-7030/7040/7050 with Kintex-7 FPGA fabric for a much higher cost. But Xilinx introduced Zynq Z-7015 late last year, a low cost Artix-7 FPGA + Cortex A9 SoC that also adds four 6.25Gbps SerDes ports and one PCIe Gen2 x4 integrated block. At least two modules based on the new SoC are currently available with DAVE Embedded Systems’ BORA Xpress and Trenz Electronic TE0715 Series. DAVE Zynq XC7Z015/XC7Z030 BORA Xpress BORA Xpress specifications: SoC Xilinx ZYNQ XC7Z015 dual ARM Cortex-A9 @ up to 866MHz with Artix-7 FPGA with 74K logic cells, 46K LUTs, 92K Flip flops, 380 KB RAM. 32 KB I-cache, 32 KB D-cache, 512 KB L2 […]

March 20, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Cubieboard4 (CC-A80) Unboxing and Getting Started Guide

A few samples of Cubieboard4 board may have been available in China in October 2014, but Cubietech only officially launched their Allwinner A80 development board about ten days ago, and you can buy it for $125 + shipping on sites like R0ck.me, Eleduino, Seeed Studio, and many other distributors. The company decided to send a sample for evaluation, and today I’ll start with a post showing some pictures of the kit, and explaining how to get started with assembly and first boot. Cubieboard 4 Pictures I received the board within two days after the company told me they would send a sample, as they used DHL. I also had to pay a bit of import tax and DHL’s handling fee. There should be CC-A80 box with the board and accessories, a white box for the power supply, and a power cord. There’s quite a few items to play with… The […]