Category: Allwinner A-Series

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Kaiboer Q7 Android 4.2 STB Features Dual Wi-Fi Antennas, Internal 3.5″ Hard Drive Bay

Kaiboer Q7 Android 4.2 STB Features Dual Wi-Fi Antennas, Internal 3.5″ Hard Drive Bay

Kaiboer Q7 is an upcoming Android 4.2 media player, a bit larger than usual, based on a dual core Cortex A7 SoC, probably AllWinner A20, that features two Wi-Fi antennas, a front panel with LCD display and buttons, and a bay for a 3.5″ SATA hard drive. AndroidPC.es reports the company did not provide the full specifications, but we still know the processor is based on a dual core Cortex A7 processor, and includes 4 USB ports, HDMI, composite and component video outputs, coaxial and optical SPDIF audio outputs, an RJ45 network connector, and on-off button. It’s quite nice to have a device with an internal 3.5″ hard drive, but one downside is the addition of an small fan to keep the device and hard drive cool. The device will run Android 4.2 with a custom interface called KIUI6.0. Price and availability are unknown at this point. Jean-Luc Aufranc (CNXSoft)Jean-Luc […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Texas Instruments OMAP5432 EVM Benchmarked Against ODROID-U2, BeagleBone Black, GK802… and an Intel Core i7-2600K based PC

Texas Instruments OMAP5432 EVM Benchmarked Against ODROID-U2, BeagleBone Black, GK802… and an Intel Core i7-2600K based PC

Texas instruments and SVTronics announced an OMAP5 evaluation board a couple of months ago. The board features OMAP5432 dual Cortex A15, dual Cortex M4 SoC, 2GB RAM, a 4GB eMMC module, USB 3.0, SATA and more. SVTronics sent a board to Linux.com, where they wrote a short review, followed by an article benchmarking the OMAP5 EVM against AllWinner A10, Freescale i.MX6, Exynos 4412 Prime, and TI Sitara platforms, namely Cubieboard, GK802, ODROID-U2, and BeagleBone Black, all running Linux. Ben Martin, the writer, also benchmarked the board against a Linux PC powered by an Intel Core i7-2600K processor (4 cores, 8 thread, clocked at 3.4GHz, with a turbo frequency up to 3.8GHz). The board used was an early version, clocked at 800MHz, and later in September, all boards will be clocked at 1.5Ghz, so for benchmarks that stress the CPU, you could expect almost double the performance. With that in mind, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on EPICT EPP-100 Android 4.2 Mini Projector

EPICT EPP-100 Android 4.2 Mini Projector

EPICT EPP-100 is a tiny Android 4.2 device with features similar to many Android mini PCs or set-top boxes, and is based on AllWinner A20 SoC with 512MB RAM and 4GB Flash, but the features that makes it different is a  35-lumens pico-projector capable of outputting an 80″ picture. Here are the specifications of the devices listed on Pandawill: SoC – AllWinner A20 Dual core ARM Cortex-A7 Dual-Core with ARM Mali-400 MP2 GPU System Memory – 512MB RAM Storage – 4GB NAND Flash + micro SD card slot (Up to 32GB) Projector – Resolution 800 x 480, 35 Lumens, Up to 80″ Connectivity – Wi-Fi 802.11 b/g/n, Bluetooth USB – 1x USB 2.0 Host, 1x micro USB OTG Audio – 3.5 mm jack for headphone Power – Standby Time: Up to one week Dimensions – 68 x 62 x 57mm Weight – 210g (without the stand) The package includes a […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on Fedora 19 ARM Remix R1 Release With Support for AllWinner A10, A10s, A13 and A20 SoCs

Fedora 19 ARM Remix R1 Release With Support for AllWinner A10, A10s, A13 and A20 SoCs

After releasing a stable version of Fedora 18 for AllWinner A10 and A13 in February, Hans de Goede, working at Red Hat and a Fedora contributor, has recently announced “Fedora 19 ARM remix for Allwinner SOCs” on linux-sunxi community mailing list. This released based on Fedora 19 for ARM together with linux-sunxi kernel and u-boot, adds support for A10s and A20 based devices, and 38 boards and devices are now supported. To give it a try, download the 665MB image:

then write it to an SD card (8GB or greater):

Where you have to replace [device] with your actual SD card device, e.g. sdc.Since u-boot is board/product specific, you’ll also have to update u-boot for your hardware. Remove the SD card, re-insert it, and run:<

to display a graphical menu (if dialog is installed on your Linux PC), or a list supported boards and products:

Select […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on WigWag Simplifies Home Automation, Provides Raspberry Pi and Arduino Shields

WigWag Simplifies Home Automation, Provides Raspberry Pi and Arduino Shields

WigWag is an home automation kit aiming at simplifying home automation, yet allowing developers to roll their own system via Arduino and Raspberry Pi Shields. Wigwag is currently composed of three devices: WigWag Sensor Block – Universal sensor device with 8 environmental sensors (light, detect motion, sound, temperature, humidity, movement…), 4 control features (relay, IR blaster…), and 2 expansion ports. It can be powered by 4x AA batteries (possibly for up to 1 year), or a USB power adapter. This device runs Contiki OS on Freescale MC1322 MCU (with built-in 6LoWPAN radio). WigWag Relay – Connects WigWag and third party devices to their cloud service, allowing interaction with Internet services, such as email, Dropbox and Twitter. It acts a bit like a central server managing all your WigWag Sensor Blocks or other connected devices such as Phillips Hue light bulbs or Belkin WeMo outlets in your house. IP networks (Wi-Fi & Ethernet) […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 18 Comments on Waxberry Pi2 Development Board Based on Rockchip RK3066

Waxberry Pi2 Development Board Based on Rockchip RK3066

The other days I announced CubieTech and Olimex were working on low cost Rockchip development boards, but it turns out there’s already one on the market called Waxberrry Pi2, or WB-RK3066, made by Waxberry, a Chinese company. Here are the specifications of this development board: SoC – Rockchip RK3066 dual core Cortex-A9 processor @ 1.6GHz with Mali-400 MP4 GPU System Memory – 1GB DDR3 RAM Storage – 8GB NAND Flash + micro SD card slot USB – Standard USB OTG + Micro USB OTG; Connectivity: 10/100M Ethernet; WIFI 802.11b/g/n (MediaTek MT5931) Bluetoothv2.1+EDR (MediaTek MT6622) Video Output –  HDMI + AV Debugging – Serial port Misc – IR Sensor Dimensions – 72mm x72mm The board comes with a Mini HDMI cable, a 5V/2A power supply, a USB Data cable, and a USB-serial board for debug. There’s also a CD with the board schematics, Android 4.1.1 SDK and Linux Kernel 3.x source […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Reko QT800 mini PC Based on AllWinner A20 Comes with Dual Band 300Mbps Wi-Fi (Maybe)

Reko QT800 mini PC Based on AllWinner A20 Comes with Dual Band 300Mbps Wi-Fi (Maybe)

In an HDMI TV stick market now dominated by Rockchip RK3066 and RK3188 based devices, Reko QT800 is one of the rare AllWinner A20 mini PCs. It comes with 1 GB RAM, 4 to 8 GB flash, as well as dual band Wi-Fi (2.4/5.0Ghz) that is said to support up a Wi-Fi connection up to 300Mbps. Reko QT800 Specifications: SoC – Allwinner A20 dual core Cortex A7 @ 1.5GHz (yeah, right… 1GHz is more like it) with Mali-400 MP2 GPU System Memory – 1GB DDR3 Storage – 4 to 8 GB Nand Flash + micro SD slot (up to 32 GB) Connectivity – Wi-Fi 802.11 b/g/n (2.4/5.0 GHz – 300 Mbps) Video Output – HDMI 1.4 (1080p) USB – 1x micro USB OTG port, 1x micro USB port for power, and 1x USB 2.0 Host port Button – Recovery button Dimensions – 106*33*14mm Weight – 34g The devices runs Google […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on Firmware Update for CS868 mini PC Version 2.06 (Android 4.1.1)

Firmware Update for CS868 mini PC Version 2.06 (Android 4.1.1)

If you’ve got a Rockchip RK3188 mini PC, there’s usually no issue with finding firmware updates, or even custom ROMs. But if you’ve bought an AllWinner A31 mini PC, such as CS868, you may feel everybody dropped the ball, as the system is not stable, and it seemed there would never be any upgrade. I’ve recently been made aware that there’s some activity on a Chinese bulletin board, and a new firmware is available for CS868: V2.06-4.1.1-20130610. As the name implied, the firmware is based on Android 4.1.1, and has been release on the 10th of June 2013. Here’s the Changelog against V2.05: Add video color brightness, contrast and saturation settings Output to HDMI output by default Other systems optimization and the Changelog against V2.04 (22nd of May): Reduce DDR frequency to improve system stability. Fixed potential sound failure. Optimize USB OTG interface to fix issues with Air mice. Increase […]