NXP i.MX Category - Page 48 of 66 - CNX Software

October 9, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Linux 3.17 Released

Linus Torvalds announced the release of Linux Kernel 3.17 on Sunday: So the past week was fairly calm, and so I have no qualms about releasing 3.17 on the normal schedule (as opposed to the optimistic “maybe I can release it one week early” schedule that was not to be). However, I now have travel coming up – something I hoped to avoid when I was hoping for releasing early. Which means that while 3.17 is out, I’m not going to be merging stuff very actively next week, and the week after that is LinuxCon EU… What that means is that depending on how you want to see it, the 3.18 merge window will either be three weeks, or alternatively just have a rather slow start. I don’t mind getting pull requests starting now (in fact, I have a couple already pending in my inbox), but I likely won’t start processing […]

October 7, 2014June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

F&S Elektronik Systeme Introduces eFus A9 Industrial Computer Modules Powered by Freescale i.MX6 SoC

F&S Elektronik Systeme, a German embedded systems company, has announced their efus A9 Computers-on-Module (CoM) based on Freescale i.MX6, are now in mass production. The CPU comes in two variants A9V2 for i.MX6 Solo, and A9V3 with i.MX6 DualLite, both of which are certified for automotive and industrial applications, and support commercial, extended, and industrial temperature ranges. eFuse A9 computer-on-module specifications: SoC – CPU Freescale i.MX6 Solo (eFus A9V2) or DualLite (eFus A9V3) @ up to 1.2 GHz + Vivante 2D and 3D GPUs System Memory – 512MB (Up to 1GB RAM) Storage – 256 MB NAND flash (Up to 1GB), 2 GB eMMC (eFus A9V3 only. up to 32GB), optional SPI NOR, optional I2C EEPROM Display I/F – 18-bit RGB, 2x 24-bit LVDS, and DVI Other interfaces available via 230 pins MXM-2 edge connector: 2x SD card I/F 1x Gigabit Ethernet 1x USB Host, 1x USB Device 2x CAN […]

September 26, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Toradex Colibri i.MX6 SoM with Freescale i.MX6 Solo and DualLite Processors

Toradex has added a new system-on-module to its Colibri family with Colibri IMX6 SoM powered by either Freescale i.MX 6Solo singl core processor, or i.MX 6DualLite dual core core processor. The SoMs are available in both both commercial and industrial temperature grade, come with up 4GB eMMC, 256 to 512MB RAM, and support Linux or Windows Embedded operating systems. Specifications listed for the Toradex Colibri i.MX6 module include: SoC – Freescale i.MX6 Solo single core or DualLite dual core Cortex-A9 core @ 800MHz (Industrial temp.) or 1GHz (Commercial temp) with Vivante 2D/3D GPUs. System Memory – 256MB (Solo) or 512MB (DualLite) DDR3 Storage – 4GB eMMC flash I/Os available via the 200-pin SO-DIMM connector: 3x 8-bit SDIO/SD/MMC 10/100M Ethernet (Micrel KSZ8041NL PHY) USB 2.0 host, USB 2.0 OTG Video Output HDMI 1.4a up to 1080p resolution RGB up to 1920×1200 (24bpp) Camera – 2x Camera Parallel inputs Audio – Audio line-in […]

September 23, 2014September 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

pcDuino Acadia 1 is a Freescale i.MX6 Quad Development Board with Arduino Headers

Linksprite has been pretty busy recently. After announcing the $39 pcDuino3 Nano, they’ve now unveiled a new board named pcDuino Acadia 1 powered by Freescale i.MX6 Quad processor with 1GB RAM, 8GB eMMC, a few common ports, and Arduino headers in order to connect Arduino shields to their Linux/Android board. pcDuino Acadia 1 (preliminary) specifications: SoC – Freescale i.MX6 Quad with four ARM Cortex A9 cores up to 1.2GHz, and Vivante GC2000 GPU with support for OpenGL/ES 2. x, OpenCL EP support, and OpenVG 1.1. System Memory – 1GB DRAM Storage – 8GB eMMC, 2x micro SD card slots (up to 128GB), and SATA Video Output – HDMI 1.4 with HDCP support, LVDS Audio Output – 3.5mm analog audio interface Camera – 1x MIPI, 1x CSI Connectivity – 10/100/1000Mbps Ethernet (limited to 470Mbps) USB – 2x USB 2.0 host ports, 1x micro USB OTG Expansion Headers – Arduino UNO compatible […]

August 22, 2014August 22, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Shuttle DSA2LS Fanless Android Mini PC with Dual Display Support for Digital Signage Applications

Shuttle is a company making small form factor PCs, and I’ve recently mentioned their Intel Celeron J1900 based mini PCs. The company has now launched its first ARM based mini PC, called DSA2LS, powered by Freescale i.MX6 Duallite processor, and running Android 4.2. This computer is mainly destined to be used as a digital signage player with features such as VESA mounts, dual screen support, protective operation, and has been designed for 24/7 operation at 0 to 45 C. Other applications include kiosk, thin clients, and vending machines. SoC – Freescale i.MX6 DualLite dual core processor @ 1GHz with Vivante GPU System Memory – 1GB DDR3 Storage – 4GB eMMC + SD card slot up to 64 GB protected by anti-theft (or anti-troll) cover Video Output – HDMI and VGA, supporting dual displays (but maybe not independent displays). Audio – HDMI, Line OUT Connectivity – 10/100/1000M Ethernet (470Mbps max) with […]

August 20, 2014August 20, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Freescale i.MX6 Development Boards (Wandboard, Cubox-i and HummingBoard) Get Android Kitkat Firmware and SDK

Several Freescale i.MX6 development boards have gotten a KitKat treat this month with the release of Android 4.4 firmware and SDK. The boards involved include Wandboard Solo/Dual/Quad, as well as Solidrun Cubox-i boards, and the Raspberry Pi like HummingBoard. Thanks to the “magic” of device tree, a single firmware image is now provided for all the boards provided by a given company. For Wandboard Solo, Dual, and Quad: Demo firmware image – android-4.4.2-wandboard-20140815.zip SDK with source code – wandboard_android-4.4.2_fullsource_20140815.tar.xz For CuBox-i and HummingBoard: Firmware image – android-4.4.2-1.0.1b-ga-aaf118bb78-gapps.img.xz Android 4.4 KitKat souce code and build instructions are available on github. Thanks to … Harley! Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

August 20, 2014August 22, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Raspberry Pi Based Slice, and EzeeCube Quad Media Players Support Internal Hard Drives (Crowdfunding)

Slice is a media player based on Raspberry Pi Compute Module, and EzeeCube Quad is media hub powered by Freescale i.MX6 Quad, and an upgrade to EzeeCube based on i.MX6 dual, which was successfully funded. The underlying hardware between Slice and EzeeCube is much different, but both devices have a lot in common. They are both media players currently being crowd-funded respectively in Kickstarter and Indiegogo, both comes with an internal hard drive, run XBMC, targets typical end-users (rather than tinkerers) and are somewhat pricey. Slice Media Player When I first saw Slice, all I could see was an Raspberry Pi module, put in a case with an internal hard drive bay, and lots of pretty RGB LEDs, and with an air mouse sold for an inflated price of 114 GBP ($190 US) without hard drive or 179 GBP ($300 US) with a 1TB drive, with admittedly some cheaper early […]

August 14, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYIR ARM9 Linux Development Boards & Computer-on-Modules Powered by Freescale i.MX28 Processor

MYIR MYD-IMX28X development boards and MYC-IMX28X CPU modules had been announced in May 2014, but I’ve just found out about them via the company’s newsletter. The CoMs are powered by Freescale i.MX28 ARM9 processors (i.MX283 or i.MX287), feature 128 MB RAM, 256 MB Flash, and connect to a baseboard to make the development boards. Target applications include smart gateways, human-machine interfaces (HMIs), handheld devices, scanners, portable medical, experimental education as well as other industrial applications. MYC-IMX28X CoMs MYC-IMX28X computer-on-module specifications: Processor – Freescale i.MX283 or i.MX287 ARM926EJ-STM processor up to 454MHz with 128KB SRAM, 128KB ROM, 1280 bits of OCOTP ROM, 16KB/32KB I and D Cache System Memory – 128MB DDR2 SDRAM Storage – 256MB NAND flash, 128KB SPI flash Connectivity – On-board Ethernet PHY Connectors – 2x 1.27mm pitch 2 x 40-pin SMT male expansion connectors with access to Ethernet – Up to 2 Ethernet (two for i.MX287, one for i.MX283) USB […]