Android News - Page 130 of 375 - CNX Software

May 3, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

$97 MXQ HF10 Android Bluetooth Speaker & TV Box Works with Amazon Alexa

Last fall, I wrote about Eny Technology HF10, a 2-in-1 Android 6.0 TV box & Bluetooth speaker powered by Amlogic S905X processor, but at the time it was still under development, and we did not know all the features. The device has now been launched under the MXQ brand with support for Amazon Alexa voice service, and is up for pre-order for $96.55 on GearBest. MXQ HF10 specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD slot up to 128 GB Video Output – HDMI 2.0a up to 4K @ 60 Hz Audio HDMI output 2.5″ 10W mono bass speaker with class-D amplifier Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 USB – 1x USB 2.0 host port Misc – Power & Play/Pause combo button, […]

May 3, 2017May 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

$59 HDFury Universal PSU Doctor Supports Power Monitoring via iOS or Android

We’ve recently covered Cambrionix PowerPad 15S, a high-end 16-port USB hub that can deliver 5V/2.1A on each port, integrates power monitoring function, and an API to control and monitor each port individually. That’s a very cool device, but it’s also expensive at around $600, and even the cheaper PowerPad 15C without data pins, come at $200. If you don’t need the complete set of features offered by Cambrionix devices, but you’ll like to get a reliable multi-port USB charger with power monitoring function, HDFury Universal PSU Doctor could be an interesting option. HDFury Universal PSU Doctor specifications: MCU – Renesas RL78 16-bit MCU USB – 3x USB ports with 2x 5V ports up to 5V/2.14A, 1x USB QC 2.0 port supporting 5V/2.14A, 9V/1.6A or 12V/1.2A output ADC – Up to 11 channels, 10-bit resolution for power monitoring Sensor – n-chip temperature sensor Power Supply Built-in 100 ~ 240V AC with […]

May 2, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Yundoo Y8 Rockchip RK3399 mini PC Review – Part 2: Android Firmware, Audio & Video Playback in Kodi

Yundoo Y8 is one of the first Android TV boxes / mini PCs powered by Rockchip RK3399 hexa-core processor to be launched. GearBest sent me a review sample, and since I’ve already taken it apart in the first part of the review, I’ll report my experience with the firmware in terms of stability and performance, as well as audio & video capabilities with TVMC (Kodi fork), and more. First Boot, Setup, and First Impressions I’ve first connected a few peripherals Seagate USB 3.0 drive to the USB port, a USB keyboard to one of the USB 2.0 port, and a USB hub to the other one with two USB RF dongles for MINIX NEO A2 Lite air mouse, and Tronsmart Mars G01 gamepad. After adding Ethernet and HDMI cable, I pressed the power button on the unit to start it up. Please note that the remote control cannot turn on […]

May 1, 2017May 2, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SavageBoard Open Source Hardware Board Powered by NXP i.MX 6 Processor Offers Multiple Display Options

While it’s hard to keep track of all NXP i.MX6 boards and modules on the market, few can claim to be open source hardware, with the exception of OpenRex, and now SavageBoard, which I just found in Linux 4.11 release log. The board comes in three variants with Solo, Dual, and Quad versions, is equipped with 4 to 8GB flash, 512MB to 1GB RAM, HDMI, TFT LCD, MIPI DSI, and LVDS ports, Ethernet, SATA (Quad only), lots of I/O headers, and more. SavageBoard Solo/Dual/Quad specifications: SoC Solo – NXP i.MX 6Solo Cortex A9 processor @ 1.0 GHz with Vivante GC880 3D GPU Dual – NXP i.MX 6Dual dual core Cortex A9 processor @ 1.0 GHz with Vivante GC880 3D GPU Quad – NXP i.MX 6Quad quad core Cortex A9 processor @ 1.0 GHz with Vivante GC2000 3D GPU System Memory Solo – 512 MB 32-bit DDR3 @ 400 MHz Dual […]

April 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 42 Comments

$24 Sunvell R69 Android 4.4 TV Box is Powered by Allwinner H2 Processor

We’ve fist seen Allwinner H2(+) quad core Cortex A7 processor in cheap development boards such as Orange Pi Zero, but the processor main market is actually “Basic OTT TV boxes” for 1080p video playback, and Sunvell R69 TV box is one of the first of those, and comes with 1GB RAM & 8GB storage. Sunvell R69 TV box specifications: SoC – Allwinner H2 quad core Cortex A7 processor @ up to 1.5 GHz (TBC) with Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB flash + micro SD slot up to 32GB Video & Audio Output – HDMI 1.4 output up to 1080p60, AV port (composite video + stereo audio) Video Codec – H.265 / H.264 up to 1080p Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi (via XR819 chipset) USB – 2x USB 2.0 ports Power Supply – 5V/2A Dimensions – 9 x 9.5 x 1.8 cm Weight – […]

April 28, 2017April 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Shuttle NS02E Rockchip RK3368 Android mini PC Supports PoE for Digital Signage and Thin Clients

The market is flooded of octa-core Android mini PCs or TV boxes for the consumer market, but Rockchip RK3368 powered Shuttle NS02E Android mini PC targets a different mark, specifically digital signage and thin clients as it’s been designed for 24/7 nonstop operation, and supports features such as PoE (Power over Ethernet). Shuttle XPC nano NS02E specifications: SoC – Rockchip RK3368 ARM Cortex A53 processor @ up to 1.5 GHz with Imagination PowerVR G6110 “Rogue” GPU System Memory – 2GB RAM Storage – 16GB eMMC flash, 2.5″ SATA bay for 7″ drives (requires one extra optional accessory), SD card reader Video Output – HDMI 2.0 Audio Output – Via HDMI, 3.5mm Line OUT audio jack Connectivity – Gigabit Ethernet (RTL8211-CG transceiver) with PoE support, 802.11 b/g/n WiFi and Bluetooth 4.0 (RTL8723BS module) USB – 3x USB 2.0 host ports Misc – Kensington lock hole, power button, power LED, HDD LED, […]

April 27, 2017May 7, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Hardkernel ODROID-XU4Q is a Fanless Version of ODROID-XU4 Exynos 5422 Development Board

[Update May 2018: You may be interested in ODROID-XU4Q review with Ubuntu 18.04] We had already seen ODROID-XU4 development board price drop to $59 earlier this year, but a frequent complain about the board remained: it requires a fan to operate at full speed, and makes noise while the fan turns. To address this issue, the company has now launched ODROID-XU4Q board with exactly the same specifications with Samsung Exynos 5422 octa-core processor, 2GB RAM, eMMC module support, Gigabit Ethernet, USB 3.0, HDMI 1.4 etc…, except the fan is replaced by a large heatsink. The company has also thoroughly tested both versions in different configurations such as setting the maximum frequency to 1.8 or 2.0 GHz, and found ODROID-XU4Q to be slightly slower under high load due to CPU throttling, as the large heatsink does not cool quite as well as the smaller heatsink in combination with a fan. However […]

April 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

96Boards Compliant HiKey 960 ARM Cortex A73 Development Board is Now Available for $239

The most powerful 96boards development board – HiKey 960 – has finally been launched, and can be purchased for $239 on Aliexpress, Amazon US, Switch Sense (Japan), Seeed Studio, or All Net (Germany). HiKey 960 specifications have not changed much since we found out about the board: SoC – Kirin 960 octa-core big.LITTLE processor with 4x ARM Cortex A73 cores @ up to 2.4 GHz, 4x Cortex A53 cores @ up to 1.8 GHz, and a Mali-G71 MP8 GPU System Memory – 3GB LPDDR4 SDRAM (PoP) Storage – 32GB UFS 2.1 flash storage + micro SD card slot Video Output / Display Interface – 1 x HDMI 1.2a up to 1080p, 1x 4-lane MIPI DSI connector Connectivity – Dual band 802.11 b/g/n/ac WiFi and Bluetooth 4.1 with on-board antennas USB – 2x USB 3.0 type A host ports, 1x USB 2.0 type C OTG port Camera – 1x 4-lane MIPI […]