Android News - Page 226 of 363 - CNX Software

November 18, 2014November 18, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Marvell Introduces ARMADA PXA1936 & PXA1908 Octa & Quad Core Cortex A53 LTE SoCs for Smartphones and Tablets

Marvell announced ARMADA PXA1928 quad core Cortex A53 LTE SoC at the beginning of the year, and they’ve now introduced two new Cortex A53 based processors with PXA1936 and PXA1908, featuring respectively eight and four ARM Cortex A53 cores at 1.5 GHz, and 5-mode 4G LTE support (TD-LTE, FDD-LTE, TD-SCDMA, WCDMA and GSM). PXA1936 targets high performance smartphones and tablets, whereas PXA1908 targets mid-range / mainstream mobile devices. Key features of the Marvell ARMADA Mobile PXA1936 include: Octa core Cortex A53 up to 1.5GHz Supports 1080p display, and video encoding and decoding Improved image processor to support 13 to 16MP camera Advanced power management and audio codec for power efficiency and audio performance Enhanced security processor Integrated location and sensor hub functionalities for better usability Field proven DSDS (Dual Sim Dual Standby) software for 5-mode modem While key features of Marvell ARMADA Mobile PXA1908 include: Cost optimized quad-core Cortex A53 […]

November 18, 2014December 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

MINIX NEO X6 Media Hub Review

Last week-end, I took a few pictures of MINIX NEO X6 media hub, and had a look at the company’s firmware and forum support which indeed seems to be good. Today, I’ve completed the full review of MINIX NEO X6, and I will compare it to two of its lower priced competitors: MXQ S85 and EM6Q-MXQ. First Boot, Settings and First Impressions The IR remote control works fine, including continuous up ad down pressing, but I switched to using Mele F10 Deluxe air mouse for convenience. I’ve connected an Ethernet cable, an HDMI cable, a micro SD card, a USB hard drive, and a USB hub with two RF dongles for my air mouse and gamepad, a USB flash drive, and a UVC webcam. I’ve connected the power, pressed the power button on the side of the box, but nothing happened at first… You have to press the button one […]

November 17, 2014September 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Unboxing of Eny M8S H.265 / 4K Android Media Player Powered by Amlogic S812 Processor

M8S and M8C Android TV boxes are updates of M8 / TM8 box, replacing Amlogic S802 quad core processor with Amlogic S812 processor which has about the same feature except it bring HEVC/H.265 hardware video decoding. M8S comes with 2GB RAM, whereas M8C features only 1GB RAM. Eny Technology decided to send me M8S for review. As usual, I’ll start with some pictures of the package, box, and board, and will do the full review in the next few days. M8S Unboxing Pictures The company send me the parcel via DHL which I promptly received with the product in the package below marked “4K OTT TV BOX” and a predominant “HEVC”. The back of the package list the main specifications: quad core processor, octo core Mali 450 GPU, Android Kitkat. and so on. There’s also a sticker showing the MAC address, which starts with C4:4E:AC for those interested. The box […]

November 17, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Android 5.0 Lollipop Coming to Allwinner A33 & A80, Rockchip RK3288, and More…

I can often see questions requesting whether SoC XYZ will support Android 5.0 Lollipop. The good news is that last week, I’ve read lots of news about Android 5.0 support on various devices including Nvidia Shield tablet, Motorola G & X smartphones, and of course the Google Nexus devices. A developer (Nanik T.) also ported Android Lollipop to ODROID U3 development board based on Exynos 4412, and he mentioned that “porting was pretty straight forward as KK and 5.0 does not have a lot of differences in terms of HAL”, which means there’s hope for more recent devices and SoCs getting the update. Chinese SoC vendors are also getting the word out that they are working on Android 5.0. Rockchip announced Lollipop support for RK3288 processor (original news in Chinese) probably coming to tablets first, and Android TV boxes later. They used their reference platforms in the provided pictures, and […]

November 15, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Unboxing of MINIX NEO X6 Android Media Hub

MINIX is a Hong Kong company known for its NEO series Android media players, which are a bit more expensive that the company, but the hardware and especially support is supposed to be better, justifying the higher price. I had never tried it a MINIX device, but thanks to Tinydeal I now have MINIX NEO X6 powered by Amlogic S805 quad core processor, with 1GB RAM, and 8GB eMMC, so I’ll soon be able to find out if the praises for the company are justified, or simply hyped. Today, I’ll take some pictures of the devices, and try to open it to check out the hardware, before writing a full review in a few days, and compare it a much cheaper device like MXQ S85. MINIX NEO X6 Unboxing Photos The parcel was sent by Singapore Posts so it took a couple of weeks to be delivered. The device is […]

November 14, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Avionic Design to Introduce Embedded Nvidia Tegra K1 Processor Module

Avionic Design, a German company specializing in the development and production of electronic components for the embedded, avionics, and healthcare market, has been working on an Nvidia Tegra K1 system-on-module (SoM) , using the quad core version of the processor, with 2GB RAM, and 16GB eMMC, putting most features found in Jetson TK1 development board into a 70×50 mm module. Nvidia Tegra K1 CPU module specifications: SoC – Nvidia Tegra K1 quad core Cortex A15 processor up to 2.2 GHz with Nvidia Kepler GPU with 192 cores up to 450 MHz System Memory – 2 GB DDR3 (1833 MHz) Storage – 16GB eMMC + SATA & SD/MMC via SoM connectors Interfaces: Video In – 2x 4-lane CSI Video Out – HDMI 1.4b, eDP, two 4-lane DSI Audio – 2x I2S, S/PDIF In and Out High Speed I/O PCIe 2.0 1x, PCIe 2.0 4x 2x USB 3.0, 2x USB 2.0 host, […]

November 14, 2014November 14, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Variscite VAR-SOM-SOLO is a Tiny System-on-Module Based on Freescale i.MX6 Solo Processor

Freescale will soon announce i.MX6 SoloX dual core processor with ARM Cortex A9 and M4 cores, and dual-port gigabit Ethernet, but companies still design and manufacture new Freescale i.MX6 Solo/Dual/Quad based hardware for their mostly industrial customers. Variscite has recently launched a smaller version of their VAR-SOM-MX6 system-on-module called VAR-SOM-SOLO powerd by Freescale i.MX6 Solo processor with up to 1GB RAM, up to 512MB NAND flash for boot code, up to 64GB eMMC flash for storage, and TI WiLink8 module with Wi-Fi and Bluetooth Smart. Variscite VAR-SOM-SOLO technical specifications: SoC – Freescale i.MX6 single core ARM Cortex-A9 core @ 1.0GHz with Vivante GC 880 + Vivante GC 320 GPU, and VPU supporting 1080p30 H.264 encode and decode. System Memory – 256MB to 1GB DDR3 RAM Storage – 128MB to 512MB NAND flash for boot code, 4GB to 64GB eMMC flash, and SD/MMC via edge connector Video Output / Display Interfaces: […]

November 13, 2014February 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Zsun SD111 Wireless USB Flash Drive Review

Zsun SD111, SD112 and SD113 are Wi-Fi / USB flash drives with respectively 8GB, 16 GB and 32GB storage. GearBest sent me the 8GB version (SD111) for review, as it could be an interesting platform to hack. I’ve take picture of the device, take it apart to check the board, review quickly the standard features with Android and Ubuntu, and try to access the board from the network. Zsun SD111 Unboxing I received the device in the following package. The flash drive comes with a micro USB to USB cable for charging and accessing the device from a computer, and a user’s manual in Chinese. You’ll probably prefer using a soft copy user manual in English… Zsun SD111 Board and Battery To open the stick, insert a sharp and thin object in the hole for the neck strap, and push upwards to lift the top cover a little, and finish […]