ethernet News - Page 14 of 17 - CNX Software

December 21, 2015December 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

GeekBox and Landingship Android Overview and Benchmarks

This week-end I checked out GeekBox TV box, and Landingship baseboard, explained how to connect the two together and install various optional accessories such as an RTC battery and a cooling fan. GeekBox comes pre-loaded with Android 5.1 + Ubuntu dual boot image, and as I’ve already reviewed other Rockchip RK3368 TV boxes, and GeekBox is also a development platform, I’ll simply run several benchmarks on GeekBox, as well as test SATA performance with an SSD connected to Landingship carrier board in Android, before checking out the Linux part a little latter. That’s no quite how you want to place the fan, but I wanted to show the USB to TTL debug board and other wires can be connected with the case closed. This allowed me to easily check whether the fan was spinning during testing, and it never did… According to one forum post, the temperature currently needs to […]

December 14, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 42 Comments

Review of MINIX NEO U1 Media Hub

We’ve already seen that MINIX NEO U1 has some impressive hardware to offer with a good thermal solution, and high-end chips for storage and WiFi, as well as some neats additions like RTC support. But obviously the most important is to find out how the box performs, so I’ve put it through it spaces with video playback and features testing, as well as some benchmarks. First Boot, OTA Firmware, Settings and First Impressions The device has three full-sized USB 2.0 ports, which become four once we had the provided USB OTG adapter to the remaining micro USB port. So I’ve connected a USB 3.0 hard drive, the RF dongle for NEO A2 Lite air mouse, a USB hub with a USB webcam, a USB keyboard, and the RF dongle for Tronsmart Mars G01 gamepad, as well as USB powered speakers to the micro USB port. After inserting HDMI, optical audio […]

December 4, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 289 Comments

Review of Beelink MINI MX TV Box with MX Player

Beelink MINI MX Amlogic S905 Android media player has similar features, and costs about the same as K1 Plus TV box I reviewed last week, so it would be interesting to compare both. While specifications are similar there are some differences. For example, MINI MX lacks AV output, and only features two USB ports against four for K1 Plus, but it supports Gigabit Ethernet which could be an advantage while playing high bitrate 4K videos, as well a Bluetooth 4.0. I’ve already provided pictures and torn down MINI MX, so today is time for the full review and a comparison with K1 plus. First Boot, Settings and First Impressions I connected my USB 3.0 hard drive to one of the USB port, and a USB hub to tghe other port with a USB webcam, a USB keyboard, and two RF dongles for a gamepad and an air mouse. I also […]

November 28, 2015November 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

K1 Plus Amlogic S905 TV Box Review

Videostrong KI Plus is one of the first Amlogic S905 TV boxes to be launched on the market, and it also happens to be one of cheapest model selling for around $45 on various sites, and it’s even available for $39.99 on GearBest for Black Friday / Cyber Monday. I’ve posted the specifications and pictures of the device previously, and after updating the firmware, I’ve finally completed the review. First Boot, Settings and First Impressions As usual, I’ve connected a whole bunch of cables and peripherals to the device to make the power supply can handle it, including a USB hard drive, a USB webcam, a USB keyboard, a USB hub with two RF dongles for Tronsmart Mars G01 gamepad and MeLE F10 Deluxe air mouse, as well as a HDMI, optical audio and Ethernet cables, and a speaker connected to the 3.5mm AV jack and powered by one of […]

October 25, 2015October 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Kingnovel R8 Android TV Box Review (VLC Edition)

Kingnovel R8 is one of the many Rockchip RK3368 based TV boxes on the market, and since I’ve already provided the specs, as well as pictures of the device and board, I’ll carry on with the review today. While I’m usually testing video playback in Kodi, I’ve only spent a short time with Kodi 15.2 on this box, and instead switched to VLC (aka VideoLAN), an another open source media player, and my favorite program to watch videos in my Ubuntu computer. Of course, I’ve also tested most hardware features and performance of the device. First Boot, and First Impressions Since I like to test worst case scenarios, I also make sure I use all the ports of the devices, and connected a USB hard drive, USB RF dongles, USB webcam, and relevant cables to the device before powering it up. Once you connect the power, I recommend you have […]

August 31, 2015November 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

Tronfy MXIV Telos TV Box Review with Android 5.1

Tronfy MXIV Telos is a TV box powered by Amlogic S812 processor running Android 5.1 Lollipop and costing just above $90 (with coupon), so it will be interesting to find out how it performs compared to Mygica ATV1900AC also based on Amlogic S812 SoC, and Android Lollipop firmware (version 5.0.2), which I reviewed recently, and sells for $169. I’ve already checked the hardware in Tronfy MX4 Telos Unboxing and Teardown, so today I’ll check how the device actually performs. First Boot, Settings and First Impressions I started by connecting peripherals: A USB hard drive to one of the USB port, and a USB hub to the other USB port with a webcam, and two RF dongles for an air mouse and a wireless gamepad, as well as HDMI and Ethernet cables, and the power supply. I then had to press the power button on the unit to start it up, […]

August 27, 2015August 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Review of Mygica ATV586 Android Set-Top Box with DVB-T2 Tuner

I’ve already tested some Android TV boxes with tuners such as HD18T (DVB-T2) and WeTek Play (DVB-S2) , but they were all based on Amlogic AML8726-MX dual core processor. Geniatech recently sent me Mygica ATV586 quad core Android DVB-T2 receiver based on Amlogic S805 processor. I’ve already taken a few pictures, and look at the hardware components, so today, I’ll write the review, mainly focusing on the live TV program capabilities including PVR and Timeshifting. First Boot, Settings and First Impressions I’ve connected a hard drive, a webcam, MeLE F10 Deluxe RF dongle, and a keyboard (for screenshots) to the device’s USB ports, as well as HDMI and Ethernet cables, and a TV antenna cable, before connecting the 5V power adapter to start the device. When everything is connected, the boot takes about 1 minute 35 seconds, but without USB devices, it drops down to 44 seconds. Boot time is […]

August 24, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 42 Comments

Review of Tronsmart Ara X5 Windows 10 mini PC with Intel Atom X5 Processor

Tronsmart Ara X5 is one of the first mini PC featuring a Cherry Trail processor, more exactly Atom x5-Z8300 quad core processor manufactured with 14nm process. Price and max TDP are similar to Atom Z3735F Bay Trail-T processor found in many mini PCs designed in China, so it will interesting to compare the two platforms. Yesterday, I took some photos of the device, and found out the design was comprised of a baseboard and system-on-module, but today, I’ll focus on testing the device in Windows 10, checking everything works as it should, as well as running some benchmarks, verifying the Windows license status, test H.265 video playback in Kodi, and more. Tronsmart Ara X5 Setup I had not much to do the first time I booted the device, as it was already configured to use English, and the system logged in with user “User” without password. I still double checked […]