hardkernel News - Page 10 of 14 - CNX Software

December 27, 2015May 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Hardkernel ODROID-XU4 Development Board Now Supports Android 6.0 Marshmallow

Android 6.0 source code was released in October, but so far few development boards are supporting it properly. There’s Android 6.0 for Raspberry Pi 2, but without GPU hardware acceleration is not really usable, and Intrinsyc Open-Q 820 board that will start shipping in a few days with Android 6.0 on Qualcomm Snapdragon 820 processor, is pricey and with limited availability. So there are only two options that I’m aware of LeMaker Hikey with Android 6.0 as part of the Reference Platform Release 2015.12, and Hardkernel ODROID-XU4 with an unofficial port for Android 6.0.1 Marshmallow by voodik odroid community member, which should also work for ODROID-XU3 and XU3 Lite boards. Despite being an alpha version, the current image looks pretty good, as most required features seem implemented: Android 6.0.1 Lollipop Cyanogenmod 13.0 with Linux kernel 3.10.9 OpenGL ES 1.1/2.0/3.0 (GPU acceleration) OpenCL 1.1 EP (GPU acceleration) Multi-user feature is enabled […]

December 18, 2015December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

DietPi is Lightweight, Easy to Use Debian Based Distribution for Raspberry Pi, ODROID, and Orange Pi Boards

Raspberry Pi, Hardkernel ODROID, and Orange Pi are some of the most popular and cost effective development boards on the market today, and one British developer, going under Fourdee nickname, has released a lightweight distribution called DietPi working for all Rasbperry Pi boards, ODROID-C1(+), ODROID-XU3/XU4, and Orange Pi PC, with Orange Pi 2 and Orange Pi Plus support coming soon, as well as a VMWare virtual machine also available for evaluation. The compressed downloads are about 80 to 100MB depending on the target, the image that can be dump with dd or Win32DiskImager requires a 1GB or greater micro SD card as the image itself is about 500MB large, Internet access (Ethernet or Wifi), and optionally a USB Drive to allow installation on a USB drive for better performance, which of course does not apply if you have an eMMC module with your ODROID board. The image also contains some […]

December 11, 2015December 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

ODROID-C0 Board is an Upcoming Alternative to Raspberry Pi Zero

When Raspberry Pi Zero launched at the end of November, it looked somewhat familiar to Hardkernel ODROID-W board that eventually had to be phased out as Broadcom would not sell Broadcom BCM2835 to the Korean company. In an interesting turn of events, Hardkernel has now shown the first prototype of ODROID-C0 (ODROID-C Zero), a tiny board based on Amlogic S805 found in ODROID-C1+. The name of the board may seem to be derived from Raspberry Pi Zero, but it’s not quite the case as Hardkernel first revealed their plans for ODROID-C0 back in November, a week before R-Pi Zero board was unveiled. ODROID-C0 will have similar specifications to ODROID-C1+ minus Ethernet, and the USB ports in order to reduce the PCB size: SoC – Amlogic S805 quad core Cortex-A5 processor with a Mali-450MP2 GPU System Memory – 1GB DDR3 Storage – eMMC module socket, and micro SD slot Video & […]

August 11, 2015August 11, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Hardkernel ODROID-C1+ Development Board is Now Shipping for $37

We already knew Hardkernel was working on ODROID-C1+ development board, an update the popular ODROID-C1 board with the same Amlogic S805 processor, storage and memory, but with a standard HDMI port replacing the micro HDMI port, I2S support, better micro SD card and HDMI-CEC support, an micro USB OTG port that can be used to power the board, and an included heatsink. The board is now up for sale for $37, or just $2 more than the original ODROID-C1 board. ODROID-C1+ specifications: SoC- Amlogic S805 quad core Cortex-A5 processor with a quad core Mali-450MP2 GPU System Memory – 1GB DDR3 Storage – eMMC 4.5 HS200 module socket for up to 64GB storage, and UHS-1 SDR50 micro SD slot Video & Audio Output – Type A HDMI port with CEC support Connectivity – Gigabit Ethernet USB – 4x USB 2.0 host ports, 1x micro USB OTG port Expansion Headers 40-pin Raspberry […]

August 1, 2015August 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Cloudshell for XU4 is a $39 NAS Kit for ODROID-XU4 Board

Hardkernel launched ODROID-XU4 development board a couple of weeks ago. The board is a low cost ($74) update to ODROID-XU3 development board, with an Exynos 5422 octa core processor (4x A15, 4x A7), 2GB RAM, Gigabit Ethernet and USB 3.0, making it a pretty good target for a NAS. It’s easy to connect all requires parts such as hard drive and power supply together, but it would normally be a mess on your desk. So the company create a NAS kit for the board with an enclosure, cables, fans, and even an LCD display with they call Cloudshell for XU4 for sell for $39, so you can get a high relatively high performance NAS for around $113 + shipping, which will vary depending on your distributor, as well as an HDD or SSD drive. Cloudshell kit content: Enclosure with top and bottom covers, rear, front and side panels. Available in […]

July 22, 2015July 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

ODROID-C1+ Board is an Upcoming Upgrade to ODROID-C1 Board

ODROID-C1 board has been relatively popular thanks to its great hardware features and good software support for its $35 price tag. In mid-June however, ODROID-C1 got out of stock due to sudden large orders, and it was only scheduled to sale again in early August because of long leadtime for some components. It turns out ODROID-C1 may never sell again, simply because it will be replaced by ODROID-C1+ with various improvements. It’s still very much based on ODROID-C1 with Amlogic S805 processor, 1GB RAM, and an eMMC sockets, but Hardkernel made the following improvements: HDMI connector change to Type-A from Type-D (micro HDMI). Improved SD card compatibility CEC function whether the RTC backup battery is installed or not ODROID-C1+ can be powered from the USB OTG port as well as DC-Jack I2S signals exposed for external audio DAC All of which are welcomed modifications. The board size will remain the […]

July 14, 2015July 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

ODROID-XU4 Development Board is a Smaller and Cheaper Version of ODROID-XU3 Board

Many people are expecting Hardkernel to launch an Exynos 7 board, but this won’t be with ODROID-XU4, maybe with ODROID-XU5, as the latest development board from Hardkernel is a modified version of ODROID-XU3 with the same Exynos 5422 octa-core processor with four Cortex-A15 cores @ 2GHz and four Cortex-A7 cores. ODROID-XU4 board specifications (differences with ODROID-XU3 highlighted and sometimes crossed out in bold): SoC – Samsung Exynos 5422 quad core ARM Cortex-A15 @ 2.0GHz quad core ARM Cortex-A7 @ 1.4GHz with Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile System Memory – 2GB LPDDR3 RAM PoP (750 MHz, 12GB/s memory bandwidth, 2x32bit bus) Storage – Micro SD slot (up to 64GB) + eMMC 5.0 module socket (16, 32, and 64GB modules available) Video Output – micro HDMI (Up to 1080p) and DisplayPort (up to 2160p) Audio Output – HDMI, 3.5mm headphone jack, […]

March 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Android 4.4 Source Code Released for ODROID-C1 Board

ODROID-C1 development board was launched on December 10, 2014, and a few days later U-boot and Linux source code was released for this low cost Amlogic S805 board, but Android was only due later due to licensing issues. I’ve just noticed Hardkernel uploaded Android 4.4 source code to github at the end of February. The build instructions are provided on ODROID-C1 wiki, and there are quite straightforward. You’ll need to type four command lines to get the code in a working directory:

mkdir odroid-c1
cd odroid-c1
repo init -u https://github.com/hardkernel/android.git -b s805_4.4.2_master
repo sync

mkdir odroid-c1

cd odroid-c1

repo init -u https://github.com/hardkernel/android.git -b s805_4.4.2_master

repo sync

and three more to build an Android image:

source build/envsetup.sh
lunch odroidc-eng
make -j8

source build/envsetup.sh

lunch odroidc-eng

make -j8

All relevant binary files (system, userdata, bootloader, kernel…) will be located in out/target/product/odroidc/ directory, and can be flash to your board via fastboot. Alternatvely, you can create an Android SD card image (out/target/product/odroidc/selfinstall-odroidc.bin) with:

make selfinstall

1	make selfinstall

That means developers will be able to easily customize source code for ODROID-C1 board, but they should also be able use this base […]