how-to News - Page 36 of 54 - CNX Software

October 14, 2015February 12, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Linux Quick Start Guide for Roseapple Pi Board based on Actions Semi S500 Processor

Roseapple Pi is a development board powered by Actions Semi S500 processor with 2GB RAM, a USB 3.0 port and more, that is based on Actions Semi Bubblegum-S500 reference design also used by Lemon Pi board. The team behind the project sent me an early sample to try it out. I’ll take some pictures, before explaining how to install and setup Debian 8.1, and how to build and run your own minimal image from source. These instructions should also work for Lemon Pi and LeMaker Guitar boards. Roseapple Pi Photos I received the board in a bubble envelope with a thank you letter, and the board itself in an anti-static bag. No other accessories were provided. Ports, connectors, and headers from top left counter-clockwise: 4-pin UART console, two USB 2.0 ports, one USB 3.0 port, 10/100 Ethernet, a 40-pin Raspberry Pi comptabile header, a MIPI DSI connected, a micro USB […]

October 13, 2015October 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

How to Reduce SD Card Firmware Images Download Size

So I’ve just received a Roseapple Pi board, and I finally managed to download Debian and Android images from Roseapple pi download page. It took me nearly 24 hours to be successful, as the Debian 8.1 image is nearly 2GB large and neither download links from Google Drive nor Baidu were reliable, so I had to try a few times, and after several failed attempt it work (morning is usually better). One way is to use better servers like Mega, at least in my experience, but another way to reduce download time and possibly bandwidth costs is to provide a smaller image, in this case not a minimal image, but an image with the same exact files and functionalities, but optimized for compression. I followed three main steps to reduce the firmware size from 2GB to 1.5GB in a computer running Ubuntu 14.04, but other Linux operating systems should also […]

September 26, 2015November 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 44 Comments

Status of Orange Pi Boards GPIO Support

Yesterday, one person asked me to make a video showing GPIO control on Orange Pi 2 mini on YouTube, and since I have just completed a post about Orange Pi camera, I thought it might be fun to check GPIO support too. This post focuses on Allwinner H3 boards, but the instructions and status should be very similar for Allwinner A20 and A31s versions. One of the first things you want before starting playing with GPIOs is the expansion header’s pinout chart, and I could not find any until I had the idea to check for schematics, which are available on Orange Pi resources page. I downloaded the schematics for Orange Pi 2, which should be the same as for Orange Pi 2 mini as the only difference is the lack of WiFi module. Orange Pi PC is a little different, and the schematics are nowhere to be found, but […]

September 26, 2015July 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

How to Use Orange Pi Camera in Linux (with Motion)

Earlier this month, I wrote a Quick Start Guide for Orange Pi Allwinner H3 boards such as Orange Pi PC, and showed how to install and configure Debian on the boards. I’ve also received the $5.90 Orange Pi camera, which when combined an Orange Pi PC, costs around $27 including shipping. So today, I’ve attached the CSI camera to my Orange Pi 2 mini board, and used it with motion to transform for the board into an IP camera. First, you’ll need to insert the camera into CON1 connector with the camera facing the ceiling, and close the black clip to keep it in place. Now connect all cable and power on your board. First, I studied the steps described on that forum thread, and modified Allwinner configuration files, but after one or two hours, I found out some work at been done since May, and it was now much […]

September 25, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Android TV Box and OpenELEC Video Tutorials

WeTek has released several video tutorials explaining how to configure WeTek TV boxes such as WeTek Play or WeTek OpenELEC, as well as the upcoming WeTel Core. The tutorials includes instructions for both Android and OpenELEC available in 6 languages: English, French, Portuguese, Spanish, Italian, and German. Some tutorials are clearly specific to WeTek products, such as “How to Activate WeTek Play membership”, but many of the tutorials are more generic starting from simple configurations steps like configuring HDMI output resolution and framerate, or configuring the network, to more advanced tasks such as configuring a DVB-S2 tuner on TVHeadend in OpenELEC. I’ve embedded the latter video tutorial below for reference. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

September 1, 2015March 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 66 Comments

Getting Started with Orange Pi PC, Pi 2 and Pi Plus Development Boards

I’ve recently received a kit based on Orange Pi mini 2 development board powered by Allwinner H3 quad core processor, but contrary to most other devices or boards I reviewed, this one what sent to me by one of my reader (thanks Jon!) as for various reasons he did not need to get it shipped to him. Today, I’ll start by showing off the kit I received, before writing a quick start guide showing how to install a Debian, and build your own Linux image. The instructions will work for all Orange Pi Allwinner H3 boards, including Orange Pi 2, Orange Pi Plus, and the recently launched Orange Pi PC, which has been rather popular thanks to its low $15 price tag. Orange Pi mini 2 Board Kit and CSI Camera This is what I got in the package… The board with a regulatory compliance and safety information sheet, as […]

August 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Connect an Android Smartphone or Tablet to a Monitor, USB Keyboard and Mouse Easily with a DisplayLink Docking Station

Following my post featuring Zenfone 2 Deluxe Special Edition smartphone with 256GB internal storage and 4GB RAM, I had an interesting discussion about mobile and desktop convergence, and we had different views on how this may pan out and what the consumers want, but we all basically agreed this was still work in progress. Another reader pointed me to his various attempts to conveniently connect his Android smartphone and tablet to a large monitor together with keyboard and mouse. He basically considered – and in most cases tested – four choices: Wireless Display solution (Miracast, Chromecast, EZcast…) together with a Bluetooth keyboard and mouse Micro USB port with MHL using a Bluetooth keyboard and mouse Slimport adapter based on MHL but with USB port for keyboard and mouse. Here’s on example of Slimport to HDMI adapter ($10). Displaylink docking station with HDMI and VGA, Gigabit Ethernet, USB 3.0 Wireless display […]

August 12, 2015August 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Windows 10 on MeLE PCG03, PCG01 and Other Intel Atom Z3735F Devices

For some reasons, after installing Ubuntu 15.04 on MeLE PCG03 a while ago, I had to re-install Windows 8.1 on the device. The backup I used with dd did not work, so I had to download the firmware from MeLE forums, and it worked OK. Right after the re-installation was complete, it asked me if I wanted to upgrade to Windows 10 for free, and I have given it a try, especially a few days ago somebody asked about Windows 10 on MeLE PCG01. So I’ll describe the update process on PCG03, show benchmarks results, and write about my experience with Kodi 15.0 in Windows 10. Upgrading to Windows 10 Once you are ready to update to Windows 10, the system will check for updates, and ask whether you want to download and install Windows 10. The download is over 2GB large, so it may take a while. It took […]