Routers, IP Cameras/Phones & IoT Devices can be Security Risks even with the Latest Firmware, and a Strong Admin Password

ZTE-ZXHN-F600W

I’ve just read an interesting article entitled “who makes the IoT things under attack“, explaining that devices connected to the Internet such as router, IP cameras, IP Phones, etc.. may be used by Botnet to launch DDoS attacks, and they do so using the default username and password. So you may think once you’ve updated the firmware when available, and changes the default admin/admin in the user interface, you’d be relatively safe. You’d be wrong, because the malware mentioned in the article, Mirai, uses Telnet or SSH trying a bunch of default username and password. That made me curious, so I scanned the ports on my TP-Link wireless router and ZTE ZXHN F600W fiber-to-the-home GPON modem pictured below, and installed by my Internet provider, the biggest in the country I live, so there may be hundred of thousands or millions of such modems in the country with the same default […]

Axiomtek Introduces IP67 Rated Waterproof Embedded Computer for Outdoor Applications

Axiomtek has just launched eBOX800-841-FL rugged IP67-rated fanless embedded system for “outdoor critical applications” such as the Industrial Internet of Things (IIOT) gateways. The waterproof mini PC is  powered by a quad core Intel Atom E3845 Bay Trail-I processor, and supports temperatures between -30°C to 60°C. Axiomtek eBOX800-841-FL embedded computer specifications: SoC – Intel Atom E3845 quad core processor @ up to 1.91 GHz with Intel HD graphics (10W TDP) System Memory – 204-pin SO-DIMM DDR3L-1066/1333 slot up to 8 GB RAM Storage – 1 x mSATA,  1x 2.5″ SATA HDD, 1x CFAST slot Video Output – VGA (M12 screw type) Connectivity 2x 10/100/1000Mbps Ethernet (M12 type) WiFI & LTE via mini PCIe slots 1x SIM socket 4x N-jack waterproof antenna connectors USB – 2x USB 2.0 ports (M12 type) Serial ports – 2 x RS-232/422/485 ports (M12 type) Expansion 1x full-size PCI Express Mini Card slot (USB + PCI […]

Gumstix Nodana 96BCE 96Boards Compatible Baseboard Takes Intel Joule Module

96Boards is an initiative from Linaro, an engineering organization focusing on ARM development, to define some hardware and software specifications for development boards. But since 96Boards specifications are open, Gumstix decided to create the first x86 board compliant with 96Boards CE hardware specifications with Nodana 96BCE baseboard powered by Intel Joule Module. For obvious reasons, this will never be an officially supported 96Boards.org platform. Nodana 96BCE board specifications: SoM – Intel Joule Module based on Intel Atom T5700 or T5500 processor with up to 16GB storage, 4GB RAM. External Storage – 1x micro SD card Video Output – 1x HDMI port USB – 2x USB 3.0 ports, 1x USB 3.0 type C port Expansion Headers 96Boards Low Speed connector with I2C, SPI and UART 96Board High Speed connector with MIPI DSI and USB 2.0 Power Supply – 8 to 18 V (if it follows 96Boards CE specs) Dimensions – 85 […]

Silicon Labs Introduces $29 Thunderboard React Bluetooth 4.2 LE IoT Board and $69 Derby Car Kit

Earlier this summer, Silicon labs launched ThunderBoard React, a Bluetooth 4.2 LE compliant board with sensors and expansion headers for IoT applications based on the company’s BGM111 Bluetooth Smart Module, and to make it much more fun to work with the company has released a Derby Car kit controlled by the board. ThunderBoard React specifications: Bluetooth Module – BGM111 Bluetooth 4.2 compliant module with integrated Tx and Rx antenna, and Cortex M4 MCU @ 38.4 MHz with 32 kB RAM and 256 kB Flash Extra Storage – Footprint for 8Mb external flash storage Sensors – Si7021 relative humidity and temperature, Si1133 UV index and ambient light sensor, Invensense MPU-6500 6-axis gyro/accelerometer, Si7201 hall effect position sensor Expansion – 12 breakout pina to connect to BGM111 GPIOs Debugging – 10-pin mini Simplicity debug connector Misc – 2x momentary buttons, 2x LEDs, power selection switch Power Supply – CR2032 coin cell battery […]

Arduino Has Launched ESLOV IoT Invention Kit on Kickstarter

Arduino LLC has just launched its very first Kickstater campaign with ESLOV IoT Invention Kit combines a WiFI board and modules, a visual code editor, and Arduino Cloud. The goal of the project is to let people connect devices to the cloud without needing any programming skills, although the Arduino IDE can still be used for more advanced users. The brain of the project is ESLOV Wireless & Motion Hub: MCU – Microchip (previously Atmel) SAMD21 ARM Cortex-M0+ micro-controller @ 48 MHz with 32KB RAM, 256 KB flash Connectivity – Wi-Fi 802.11 b/g/n USB – 1x micro USB port for programming and power Sensor – One motion sensor Expansion – 5-pin ESLOV connector based on I2C protocol plus a multifunction pin for wakeup, IRQ, and discovery The ESLOV hub would then connect to tiny (2.5 x 2.5cm) ESLOV modules based on Atmega ATmega328P MCU, and communicating through the ESLOV protocol. […]

Qualcomm is Finally Open for Business with Snapdragon 410E and 600E Processors for Embedded & IoT Applications

Qualcomm processors are found in mobile devices and wearables selling in large quantities, some boards and modules from embedded systems companies such as Inforce Computing and Intrinsyc, as well as it own 96Boards compliant DragonBoard 410c and DragonBoard 600c development boards, but it’s hard to find them in many other products, and few crowdfunding campaign feature Snapdragon processors, as Qualcomm may not be willing to work with smaller companies and startups. The company has made some progress in that regards with their partnership with Allwinner to allow smaller Chinese companies to manufacture Snapdragon based Tablets, and their newly introduced Snapdragon 410E and 600E processors targeting embedded systems and IoT applications, available from Arrow Electronics without questions asked, and with long term availability for 10 years, i.e. until 2025 based on available of Snapdragon 410 mobile version. Snapdragon 410E (APQ 8016E) specifications: CPU – Quad ARM Cortex A53 @ up to […]

FriendlyARM Introduces NanoPi NEO AIR Board with WiFi & BLE, Camera Interface and 8GB Storage for $17.99

FriendlyARM launched NanoPi NEO board with Allwinner H3 processor, Ethernet, and USB ports for $7.99 to $9.99 in July, and the company is back with a new board with the same form factor and processor, by trading Ethernet for WiFi, dropping one USB 2.0 port for a DVP camera interface, and adding an 8GB eMMC flash. NanoPi NEO AIR specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – 8GB eMMC Flash (Samsung) + micro SD card slot Connectivity – WiFi 802.11 b/g/n and Bluetooth 4.0 LE (via Ampak AP6212 module) with IPEX antenna connector USB – 1x micro USB OTG port, 2x USB via headers Camera – 1x DVP camera interface with optional 5MP CAM500B camera Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin […]

Orange Pi Zero and Orange Pi i96 96Boards IoT Edition Boards Coming Soon

Shenzhen Xunlong Orange Pi boards are relatively popular thanks to their low price, and support on communities such as Armbian, but two new upcoming Orange Pi boards might make the company even more relevant in the development board space. First, the company is nearing completion of the tiny, and hopefully ultra cheap, Orange Pi Zero board with Allwinner H2+ processor, and Linaro has announced that an Orange Pi i96 boards compliant with 96Board IoT specifications is also coming soon. Orange Pi Zero The board has not been released, but some pictures have been uploaded to Armbian forums. Orange Pi Zero looks quite similar to NanoPi NEO board but with different processor, a slightly larger form factor, and both Ethernet and wireless connectivity. We don;t have other information for now, but it still possible to get most of Orange Pi Zero specifications from the photos: SoC – Allwinner H2(+) quad core […]