Linux News - Page 152 of 432 - CNX Software

May 15, 2020 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Banana Pi BPI-M4 SBC Gets 2GB RAM, Sells for $43

First unveiled in February 2019, Banana Pi BPI-M4 is a single board computer based on Realtek RTD1395 quad-core Cortex-A53 4K media processor and following Raspberry Pi 3B+ form factor pretty closely. BPI-M4 officially launched in June 2019 for just $38 with 1GB DDR4 RAM, but despite the 2GB RAM option being listed in the specification, the 2GB version of the board was not available, at least on Aliexpress. The good news is that Banana Pi BPI-M4 with 2GB RAM has just started selling for $43 plus shipping on Aliexpress, or in Taobao if you based in China. Banana Pi BPI-M4 2GB specifications: SoC – Realtek RTD1395 quad-core Arm Cortex-A53 processor with Mali-470 MP4 GPU System Memory – 2GB DDR4 RAM Storage – 8GB eMMC flash, micro SD slot up to 256GB, M.2 NVMe SSD Video Output – HDMI 2.0b port up to 4K @ 60 Hz, HDR support Video Decode […]

May 15, 2020July 3, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Stinger96 (NB-IoT + eMTC) and Avenger96 96Boards STM32MP1 SBCs Giveaway

96Boards, Arrow Electronics, STMicro, and Shiratech have joined hands to organize a giveaway event with up to 500 Avenger96 or Stinger96 boards going to lucky winners. I’ve already covered STM32MP1 powered Avenger96 SBC compliant with 96boards CE Extended specification, but I’ve never heard about Stinger96 board, so before going into the giveaway rules, let’s have a closer look at this new 96Boards board designed by Israel based Shiratech. Stinger96 96Boards NB-IoT + eMTC SBC Specifications: SoC – STMicro STM32MP157 dual-core Arm Cortex-A7 processor @ up to 650 MHz (4158 CoreMark) with Arm Cortex-M4F MCU @ up to 200 MHz (673 CoreMark), 708KB internal SRAM System Memory – 256M x 32-bit DDR3 (1GB RAM) Storage – 8Gbit SLC NAND Flash, MicroSD card slot Connectivity Gigabit Ethernet header (via Microchip KSZ9031RNX) GPS, NB-IoT & eMTC (LTE Cat M1) IoT cellular connectivity with 2G fallback via Quectel BG96 module, SIM card slot, and […]

May 13, 2020May 13, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

BeagleBone Green Gateway SBC with Ethernet, WiFi, and Bluetooth Launched for $60

BeagleBone Green Gateway SBC was first unveiled last July as an update to BeagleBone Green Wireless board with Ethernet, and Octavo Systems OSD3358 SiP along with some smaller changes like support for 12V power supply and I2C RTC + battery. The board did however lose two USB 2.0 ports to make space for the Ethernet connector. The board was not quite available at the time, but the good news is that you can now buy BeagleBone Green Gateway for $59.99 on Seeed Studio. Specifications have remained the same as the ones provided for the initial announcement: SiP – Octavo Systems OSD3358 with Texas Instruments AM3358 Arm Cortex-A8 processor @ 1.0 GHz, 2×32-bit 200-MHz programmable real-time units (PRUs), 3D graphics accelerator, 512MB DDR3 SDRAM, 4KB EEPROM, and integrated power management Storage – 4GB 8-bit eMMC on-board flash storage (Kington) + microSD socket Connectivity 10/100Mbps Ethernet (RJ45) WiFi 802.11 b/g/n 2.4GHz + […]

May 13, 2020May 14, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

DEVICE.FARM Generates Raspbian/Armbian Docker Images for about 100 Arm Linux SBCs

Last year, I reviewed BalenaOS and BalenaCloud on Raspberry Pi CM3L based BalenaFin hardware. The solution generates OS images with docker support in order to easily manage and update a fleet of devices remotely over a web interface or client program. Balena.io supports over 60 boards either officially, or thanks to the work of the community, but Pavel Burgr is developing an alternative with DEVICE.FARM supporting close to 100 Arm SBC’s including Raspberry Pi boards, and most Armbian supported Arm SBC’s. DEVICE.FARM is still beta, but the MVP (Minimum Viable Product) version of the website provides: Customized images for supported boards (currently 94 boards) Preinstalled docker Secure remote access to the device’s docker end-point Secure remote access to the device’s services exposed by containers This is functional, but bugs are likely, and documentation still needs to be finalized. I don’t have a board with me, but I tried to generate […]

May 12, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

AI Network Video Recorder Combines Intel Atom X5 E3940 SoC, Two Myriad X VPUs, and Five Ethernet Ports

AAEON seems to launch a new “AI Embedded Box PC” monthly either equipped with an NVIDIA Jetson module or a solution combining an Intel processor and a Myriad X VPU card. Here’s another one with AAEON VPC-3350AI AI edge computer powered by an Intel Atom X5 E3940 Apollo Lake processor, as well as two Myriad X VPUs for AI acceleration, and equipped with five Ethernet ports – four of which supporting PoE – to get video data from IP cameras or other networked video sources that makes it especially suitable as an AI network video recorder. VPC-3350AI specifications: SoC – Intel Atom X5-E3940 quad-core Apollo Lake processor @ 1.6 GHz / 1.8 GHz with 2 MB cache, 12 EU Intel UHD graphics; 9.5W TDP; Option for Celeron N4200/N3350 and X5-E3950) System Memory – Up to 8GB, DDR3L via 204-pin SODIMM socket Storage – 1x SATA port for 2.5″ drives AI […]

May 12, 2020May 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Lnav Log Files Navigator Helps You Analyze Log Files in a Mac OS or Linux Terminal

If you have a problem with your computer, you may have to go through log files, or as a software engineer, you may be looking for clues about a bug in a debug or error log. It can be done in any text editor, but there may be a better way thanks to lnav Log Files Navigator that allows checking those files more easily and efficiently in a Mac OS or Linux terminal. The following log files are supported by default even if they are compressed with gzip or bzip2: Common Web Access Log format CUPS page_log Syslog Glog VMware ESXi/vCenter Logs dpkg.log uWSGI “Generic” – Any message that starts with a timestamp Strace lnav is open-source software released under a BSD-2 clause in Github. It’s not new at all as some commits were made in January 2010, but it’s new to me, and hopefully to some of you as […]

May 11, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

4K Vision Edge Computing Platform Features Xilinx Zynq UltraScale+ ZU3EG MPSoC

Last year, MyIR Tech introduced MYD-CZU3EG development board powered by a Xilinx Zynq UltraScale+ ZU3EG MPSoC with Arm Cortex-A53 cores and FPGA fabric designed for applications such as cloud computing, machine vision, flight navigation, and other complex embedded applications. The company has now announced another Zynq Ultrascale+ ZU3EG based platform dedicated to machine vision. The VECP Starter Kit (Vision Edge Computing Platform) is comprised of MYD-CZU3EG-ISP development board fitted with the company’s MYC-CZU3EG Zynq UltraScale+ MPSoC CPU module, a fansink, and a SONY IMX334 4K camera sensor. MYD-CZU3EG-ISP development board specification: MYC-CZU3EG SoM MPSoC – Xilinx Zynq UltraScale+ XCZU3EG-1SFVC784E (ZU3EG, 784 Pin Package) MPSoC with quad-core Arm Cortex-A53 processor @ 1.2 GHz, dual-core Cortex-R5 processor @ 600 MHz, Arm Mali-400MP2 GPU, and 16nm FinFET+ FPGA fabric (154K logic cells, 7.6 Mb memory, 728 DSP slices) System Memory – 4GB DDR4 @ 2,400MHz Storage – 4GB eMMC Flash, 128MB QSPI Flash […]

May 11, 2020July 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

WiFi 6 Embedded SBC Features Qualcomm IPQ6018 Processor, Gigabit & 2.5Gbps Ethernet Ports

Last year, we covered Dakota DR40x9 Wave-2 AC router board powered by Qualcomm IPQ4019 or IPQ4029 quad-core Cortex-A7 WiSoC, but there’s now a new Qualcomm based embedded SBC supporting WiFi 6. DR6018 (aka AP.CP01 or just CP01) is powered by Qualcomm IPQ6018 quad-core Cortex-A53 WiSoC with 802.11ax WiFi 6, six Ethernet ports including five Gigabit Ethernet, and one 2.5 GbE port, as well an M.2 expansion socket. Specifications: SoC – Qualcomm Atheros IPQ6018 quad-core Arm Cortex-A53 processor @ 1.8 GHz apparently part of Qualcomm Networking Pro 400 platform; 14nm FinFET process System Memory – 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Storage – 256MB NAND Flash, 32MB NOR flash, SD card slot Networking Wired 5x Gigabit Ethernet ports 1x 2.5Gbps Ethernet port Wireless WiFi 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, max 23dBm per chain 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax WiFi 6, max 20dBm per chain […]