Qualcomm processors are found in mobile devices and wearables selling in large quantities, some boards and modules from embedded systems companies such as Inforce Computing and Intrinsyc, as well as it own 96Boards compliant DragonBoard 410c and DragonBoard 600c development boards, but it’s hard to find them in many other products, and few crowdfunding campaign feature Snapdragon processors, as Qualcomm may not be willing to work with smaller companies and startups. The company has made some progress in that regards with their partnership with Allwinner to allow smaller Chinese companies to manufacture Snapdragon based Tablets, and their newly introduced Snapdragon 410E and 600E processors targeting embedded systems and IoT applications, available from Arrow Electronics without questions asked, and with long term availability for 10 years, i.e. until 2025 based on available of Snapdragon 410 mobile version. Snapdragon 410E (APQ 8016E) specifications: CPU – Quad ARM Cortex A53 @ up to […]
FriendlyARM Introduces NanoPi NEO AIR Board with WiFi & BLE, Camera Interface and 8GB Storage for $17.99
FriendlyARM launched NanoPi NEO board with Allwinner H3 processor, Ethernet, and USB ports for $7.99 to $9.99 in July, and the company is back with a new board with the same form factor and processor, by trading Ethernet for WiFi, dropping one USB 2.0 port for a DVP camera interface, and adding an 8GB eMMC flash. NanoPi NEO AIR specifications: SoC – Allwinner H3 quad-core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – 8GB eMMC Flash (Samsung) + micro SD card slot Connectivity – WiFi 802.11 b/g/n and Bluetooth 4.0 LE (via Ampak AP6212 module) with IPEX antenna connector USB – 1x micro USB OTG port, 2x USB via headers Camera – 1x DVP camera interface with optional 5MP CAM500B camera Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin header […]
BeagleBone Black Wireless Board Gets WiFi and Bluetooth 4.1 LE, Drops Ethernet
The BeagleBone Black is still one of the most popular development boards around, but in a world going more and more wireless, it only comes with a wired Ethernet interface. Seeed Studio BeagleBone Green Wireless and Neuromeka BeagleBone Air already provided BeagleBone compatible boards with WiFi and Bluetooth LE, as well as Zigbee for the latter, but now BeagleBoard.org themselves have launched BeagleBone Black Wireless with WiFi and Bluetooth 4.1 LE based on Octavo Systems OSD3358 System-in-Package with Texas Instrument Sitara AM3358 processor, 512 MB RAM, TI LDO and PMIC, and many passive components. BeagleBone Black Wireless specifications: SoC – Texas Instruments Sitara AM3358 Cortex A8 @ 1 GHz with PowerVR SGX530 GPU System Memory – 512 MB DDR3L Storage – 4GB eMMC flash + micro SD slot USB – 1x mini USB client port for power & communication, 1x USB host port Connectivity – 802.11 b/g/n WiFi + Bluetooth […]
Orange Pi Zero and Orange Pi i96 96Boards IoT Edition Boards Coming Soon
Shenzhen Xunlong Orange Pi boards are relatively popular thanks to their low price, and support on communities such as Armbian, but two new upcoming Orange Pi boards might make the company even more relevant in the development board space. First, the company is nearing completion of the tiny, and hopefully ultra cheap, Orange Pi Zero board with Allwinner H2+ processor, and Linaro has announced that an Orange Pi i96 boards compliant with 96Board IoT specifications is also coming soon. Orange Pi Zero The board has not been released, but some pictures have been uploaded to Armbian forums. Orange Pi Zero looks quite similar to NanoPi NEO board but with different processor, a slightly larger form factor, and both Ethernet and wireless connectivity. We don;t have other information for now, but it still possible to get most of Orange Pi Zero specifications from the photos: SoC – Allwinner H2(+) quad core […]
Parrot S.L.A.M Dunk is a Ubuntu & ROS Computer with 3D Depth Cameras for Drones & Robots
Parrot and Canonical have partnered to develop the Parrot S.L.A.M.dunk development kit for the design of applications for autonomous navigation, obstacle avoidance, indoor navigation and 3D mapping for drones and robots, and running both Ubuntu 14.04 and ROS operating systems. The name of the kit is derived from its “Simultaneous Localization and Mapping algorithm” (S.L.A.M) allowing for location without GPS signal. Parrot S.L.A.M Dunk preliminary specifications: SoC – NVIDIA Tegra K1 processor Camera – Fish-eye stereo camera with a 1500×1500 resolution at 60fps Sensors – Inertial-measurement unit (IMU), ultrasound sensor up to 15 meters range, magnetometer, barometer Video Output – micro HDMI USB – 1x micro USB 2.0 port, 1x USB 3.0/2.0 port Weight – 140 grams Parrot S.L.A.M dunk can be fitted various drones and robotic platforms such as quadcopters and fixed-wings, rolling robots and articulated arms using mounting kits. The computer module is then connected to the host […]
Roqos Core AC Router Runs Debian on Intel Atom Bay Trail-I Processor for $19… Plus Monthly Subscriptions
Roqos Core router is interesting on several front. First it’s quite powerful and features-rich with an Intel Atom E3845 processor, five Gigabit Ethernet ports, 802.11ac WiFi, a USB 3.0 port, and even an HDMI port allowing you to use it as a Media Center too. It should also be quite customizable, software wise, since it runs Debian, and finally the business model is also different, as you only need to pay $19 for the router, with the catch that you need to subscribe Roqos Service with “advanced cybersecurity and parental control features” for $17 per month for at least 12 months, bringing the total to $223. After one year, you can opt out of the cloud service, and continue to use the router without the extra security features. Roqos Core RC10 router hardware specifications: SoC – Intel Atom Bay Trail-T E3845 quad core processor @ up to 1.91 GHz (10W […]
Marvell ESPRESSOBin Board with Gigabit Ethernet, SATA, mini PCIe, and USB 3.0 To Launch for $39 and Up (Crowdfunding)
I can often read people hoping for an inexpensive community board for network, storage and connectivity applications with high speed interface like SATA, multiple Gigabit Ethernet port, USB 3.0 and/or mini PCIe, and that’s exactly what Globalscale Technologies is about to offer with their Marvell ARMADA 3700 based ESPRESSOBin development board to go for $39 and up via Kickstarter. Marvell ESPRESSOBin board specifications: SoC – Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz System Memory – 512MB DDR3 or optional 1GB DDR3 Storage – 1x SATA interface, 1x micro SD card slot with footprint for an optional 4GB EMMC Network Connectivity 1x Topaz Networking Switch 2x GbE Ethernet LAN 1x Ethernet WAN 1x MiniPCIe slot for Wireless/BLE periphereals USB – 1x USB 3.0, 1x USB 2.0, 1x micro USB port Expansion – 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, […]
Report: Linux Cannot Be Installed on Microsoft Signature Edition PCs, Laptops and Tablets
Microsoft Signature program is designed to make sure certified devices offer the best possible experience for users, as they can not come with bloatware, include Windows Defender, and must meet strict hardware requirements. However according to a Phoronix report, “providing the best possible user experience” also includes blocking installation of alternative operating systems such as Ubuntu, Debian, or other Linux distributions. The issue was discovered by rijesh who attempted to install Ubuntu 16.04 on his Microsoft Signature Edition Lenovo Yoga 900 13-ISK2 laptop, and noticed that while the BIOS and Windows 10 could see his 512 GB hard drive, Ubuntu was unable to find it, and a customer support representative answered that: This system has a Signature Edition of Windows 10 Home installed. It is locked per our agreement with Microsoft. Another user reports having successfully installed Ubuntu 16.04 on his Lenovo YOGA 900-13ISK, so the devil is in the […]