NETGEAR RBKE963 Orbi quad-band WiFi 6E mesh system delivers up to 10.8Gbps speed

NETGEAR Orbi quad-band WiFi 6E mesh system

NETGEAR RBKE963 Orbi quad-band WiFi 6E mesh system delivers wireless connectivity through the home with one router and two satellites with a maximum wireless link of 10.8 Gbps. one 10GbE WAN port for Internet connectivity, and several 2.5GbE and Gigabit Ethernet LAN ports. Powered by a quad-core 2.2GHz processor, the mesh system supports 2.4 GHz, 5.2 GHz, 5.8 GHz, and the new 6 GHz band offered by WiFI 6E, covers an area of up to around 840 square meters, and supports up to 200+ clients. NETGEAR RBKE963’s router and satellites share most of the same specifications: SoC – Unnamed quad-core processor @ 2.2 GHz (likely Qualcomm Networking Pro 1610 Platform) Memory & Storage RBRE960 router – 1 GB RAM, 512MB NAND flash RBSE960 satellites – TBD WiFi connectivity Radio 1: IEEE 802.11b/g/n/ax 2.4GHz with 1024-QAM support up to 1200 Mbps Radio 2: IEEE ® 802.11a/n/ac/ax 5GHz with 1024-QAM support up […]

Linux 5.12 – Main Changes, Arm, MIPS and RISC-V Architectures

Linux 5.12

Linux 5.12 release was expected last Sunday, but Linus Torvalds decided to release one more release candidate, namely Linux 5.12-RC8, to “make sure things are all settled down“, so the latest Linux kernel is now expected this weekend.  Tihs should not yield any significant changes, so we can check what’s new in Linux 5.12, notably with regards to Arm, MIPS, and RISC-V architectures often used in SoC’s found in embedded systems. Around two months ago, the release of Linux 5.11 added support for Intel’s software guard extensions (SGX) and Platform Monitoring Technology (PMT), AMD “Van Gogh” and “Dimgrey cavefish” graphics processors, MIPI I3C host controller interfaces, and much more. Some interesting changes in Linux 5.12 include: Added support for ACRN hypervisor designed for IoT & embedded devices Added support for Playstation DualSense & Nintendo 64 game controllers, as well as Nintendo 64 data cartridges Dynamic thermal power management via a […]

The First 802.11ax WiFI 6 Routers are Now Shipping for $350 and Up

Netgear RAX80 WiFi 6 Router

802.11ax WiFi, to be known as WiFi 6 for consumer, promises a much higher throughput up to 10 Gbps, and a better ability to manage high density scenario (i.e.). crowded places where may users connect at the same time. ASUS announced several 802.11ax routers at CES 2018, and the entry-level model – ASUS RT-AX88U – with a combined maximum throughput of 6000 Mbps (referred to as AX6000) is now sold on Amazon for $349.99. NETGEAR has also unveiled their own WiFi 6 routers with respectively Nighthawk AX80 (RAX80) and Nighthawk AX120 (RAX120) routers. I’ve already covered ASUS routers in a previous post, and the 12-stream RAX120 will only become available in Q1 2019, so I’ll focus on the spaceship looking 8-stream RAX80 router since it’s available now. RAX80 WiFi 6 router specifications: SoC –  Broadcom BCM49408 quad core Cortex-A53 processor @  1.8GHz with network packet co-processor @ 800 MHz WiFi […]

NETGEAR Gigabit Class LTE Mobile Router MR1100 is Powered by Qualcomm Snapdragon X16 LTE Modem

Qualcomm, NETGEAR, Telstra and Ericsson have jointly announced the very first commercial Gigabit LTE modem router  with NETGEAR Mobile Router MR1100 based on Qualcomm Snapdragon X16 LTE modem. The NETGEAR Mobile Router MR1100 leverages 3x carrier aggregation, 4×4 MIMO, and 256-QAM, to achieve download speeds up to a peak of 979 Mbps. The device also integrates Qualcomm 802.11ac solution with 2×2 MIMO and dual-band support for overall Wi-Fi throughput of up to 1Gbps. Qualcomm Technologies has recently conducted a simulation of a Gigabit Class LTE network, using a mix of LTE devices (LTE Category 4 to 16), and found average throughput to be between 112 Mbps and 307 Mbps for Cat.16 devices depending on traffic type, but speeds up to 533 Mbps should be possible for 90th percentile users. Beside shortening download speeds, this kind of performance will enable new applications such as 4K 360 degrees VR videos up to […]

Marvell Armada 370 Processor Datasheet Released, Mainline Linux Kernel Supported on Netgear ReadyNAS 102/104

Free Electrons has been working on porting several ARM SoC to the Linux kernel (mainline), including Marvell XP and 370 SoCs, and they’ve been informed by Marvell that the company finally released Marvell Armada 370 processor publicly without requiring NDA nor registration. Marvell Armada XP dual and quad core processors datasheet found in higher-end NAS and cloud servers has not been released (yet), but we’ve been told many peripheral blocks are very similar, so Marvell Armada 370 datasheet can also be used for Armada XP processors to some extend. Two documents have actually been released for Marvell Armada 370: the functional specification and the hardware specification (datasheet). The first document is actually the one with the most information with 1148 pages providing details about peripherals, against 164 pages for the latter providing details about pins and electrical characteristics. So we’ve got an ARM SoC with mainline kernel support, and decent […]

NETGEAR NeoMediacast Android HDMI Dongle (NTV300D) Features Wi-Fi 802.11ac Module

NETGEAR has announced a new HDMI dongle called NeoMediacast, but also known as NTV300D model, running Android 4.2.2, with functionalities very similar to all the HDMI TV sticks / mini PCs originating from Chinese manufacturers we’ve seen for nearly 2 years. AFAIK, NETGEAR is the first relatively well-known global company to unveil an Android HDMI TV stick for the consumer market. [Update: see comments for details how it will reach the comsumer]Key features published for NTV300D by the company: Android 4.2+ supported with RDK support in the future 1080p/60 full HD, H.264/MPEG4 video decode Supports HDMI 1.4 and HDCP 2.1 Miracast-enabled Wi-Fi 802.11ac 1×1 AC 450 Mbps, Bluetooth 4.0 USB powered Micro SD slot for playback/storage Micro USB (OTG) for secondary storage Misc – Infrared Port, status LED DRM support for Microsoft PlayReady, Google Widevine and Adobe RTMPe Remote control unit – RF4CE or Bluetooth supported So there’s now information […]