solidrun News - Page 5 of 7 - CNX Software

August 3, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ClearFog GT 8K is a High-End Networking SBC Powered by Marvell ARMADA A8040 Processor

A few years ago, SolidRun launched ClearFog Pro and Base router boards based on Marvell ARMADA 388 Armv7 (32-bit) processor, and about a year later, the company introduced MACCHIATObin networking board powered by a more powerful Marvell ARMADA 8040 quad core Cortex A72 processor. The company has now given an upgraded to its ClearFog family with ClearFog GT 8K networking board powered on the same ARMADA A8040 processor as on the community board, and offering support for up to 16GB RAM, 6 network interfaces including one 10GbE SFP+ cage , and three mPCIe slots. ClearFog GT 8K specifications: SoC – Marvell ARMADA A8040 quad-core Cortex A72 processor up to 2GHz (commercial), up to 1.6 GHz (industrial) Memory – DIMM slot for up to 16GB DDR4 Storage – Up to 128GB eMMC flash, 64 Mbit SPI flash, micro SD slot, M.2 SSD via optional M.2 mPCIe adapter Connectivity 4x 1GbE switched LAN […]

March 2, 2018March 2, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

SolidRun Announces i.MX 8M Industrial Systems-on-Module, Cubox Pulse Mini PC and HummingBoard Pulse Board

Solidrun has several products based on NXP i.MX6 processors including i.MX6 SoMs, Cubox-i mini PCs, and HummingBoard Edge development board, which were launched between 2013 and 2015, and still sold to this day. But the company has now launched refreshes for all those products based on the new i.MX 8M 64-bit Arm processors with i.MX 8M industrial systems-on-module, Cubox Pulse mini PC, and HummingBoard Pulse SBC. Solidrun i.MX 8M SoM Three different modules – which differ only by their processor and max memory capacity – are available with the following specifications: SoC SOM i.MX8 Dual – NXP i.MX 8M Dual core ARM A53 @ 1.3 GHz (up to 1.5 GHz), Arm Cortex-M4, and Vivante GC7000 Lite GPU SOM i.MX8 Quad Lite – NXP i.MX 8M QuadLite quad core ARM A53 @ 1.3 GHz (up to 1.5 GHz), Arm Cortex-M4, and Vivante GC7000 Lite GPU SOM i.MX8 Quad – NXP i.MX […]

December 20, 2017July 21, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

SolidRun MACCHIATObin Single Shot Networking Board Launched for $269 and Up

Earlier this month, I listed SoliRun MACCHIATObin networking board as one of the top 5 most powerful ARM boards in 2017/2018, thanks to its fast quad core Cortex A72 processor, support for up to 16GB RAM, three SATA interfaces, and network connectivity options with several Ethernet copper/SFP interfaces up to 10 Gbps. The problem with powerful boards is that they can be expensive, and the original MACCHIATOBin (Double Shot) board sells for $369 and up. The good news is that SolidRun has just launched a cheaper version called MAACHIATOBin Single Shot with a quad core Cortex A72 processor limited to 1.6 GHz (instead of 2.0 GHz), and the two 10 Gbps interface are only accessibly through SFP cages, and not Ethernet copper (RJ45) ports anymore. MACCHIATOBin Single Shot is based on the same PCB as the original version of the board, and the rest of the specifications are just the […]

November 14, 2017November 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

First OpenCL Encounters on Cortex-A72: Some Benchmarking

This is a guest post by blu about his experience with OpenCL on MacchiatoBin board with a quad core Cortex A72 processor and an Intel based MacBook. He previously contributed several technical articles such as How ARM Nerfed NEON Permute Instructions in ARMv8 or OpenGL ES development on Ubuntu Touch. Qualcomm launched their long-awaited server ARM chip the other day, and we started getting the first benchmarks. Incidentally, I too managed to get some OpenCL ray-tracing code running on an ARM Cortex-A72 machine that same day (thanks to pocl – an LLVM-based open-source OCL multi-platform implementation), so my benchmarking curiosity got me. The code in question is an OCL (half-finished) port of a graphics demo from 2014. Some remarks of what it does: For each frame: a single thread builds a sparse voxel octree from a dynamic voxel scene; the octree, along with current camera settings are passed to an […]

October 10, 2017October 10, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Industrial Shields Industrial Panel PCs are Based on Raspberry Pi, Banana Pi, or HummingBoard

Boot&Work Corp., S.L. is a company based in Catalonia that sells industrial automation electronic devices under “Industrial Shields” brand. What makes their product noticeable is that they all appear to be based on maker boards such as Arduino or Raspberry Pi. The company offers various Arduino based PLC modules with or without Ethernet that can be controlled with 10.1″ industrial grade panel PCs based on ARM Linux development boards. Currently three sub-families are available: HummTOUCH powered by Solidrun HummingBoard-i2 NXP i.MX 6Dual Lite board BANANATOUCH with either Banana Pi M64 (Allwinner A64 quad core Cortex A53) or Banana Pi M3 (Allwinner A83T octa core Cortex A7) TOUCHBERRY with Raspberry Pi model B or Raspberry Pi 3 model B Beside the different processors, the 10.1″ Panel PCs share some of the same specifications: Display – 10.1″ resistive multitouch LVDS, 315 nits, 170° viewing angle, 1280×720 resolution Video Input – MIPI CSI […]

June 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

NFV PicoPod is a Cluster of Six MACCHIATOBin Networking Boards for OPNFV, ODP, DPDK and OPF

If you are interested in networking applications, you may have already heard about Marvell ARMADA 8040 based SolidRun MACCHIATOBin board with multiple 10Gbps and Gbps network interfaces, three SATA ports, and more. PicoCluster has decided to make a cluster of 6 MACHIATOBin boards coupled with a Marvell Prestera DX 14 port, 10GbE switch for OpenDataPlane (ODP), Data Plane Development Kit (DPDK), OpenFastPath(OPF) as well as OPNFV (Open Platform for Network Functions Virtualization) . The main features of the full assembled kit – named Cube – include: 6x MACCHIATOBin quad core Cortex A72 boards (24 cores in total) 1x Prestera DX 10GbE 14-port switch board 6x fans Power Supply Acrylic case The cluster kit comes with 64GB micro SD cards pre-loaded with the latest OPNFV Danube software release for ARM integrated by ENEA Software AB. The cluster is said to be compliant with the OPNFV Pharos specification. Three pre-order options are […]

May 1, 2017May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Linux 4.11 Release – Main Changes, ARM & MIPS Architecture

Linus Torvalds has just released Linux 4.11: So after that extra week with an rc8, things were pretty calm, and I’m much happier releasing a final 4.11 now. We still had various smaller fixes the last week, but nothing that made me go “hmm..”. Shortlog appended for people who want to peruse the details, but it’s a mix all over, with about half being drivers (networking dominates, but some sound fixlets too), with the rest being some arch updates, generic networking, and filesystem (nfs[d]) fixes. But it’s all really small, which is what I like to see the last week of the release cycle. And with this, the merge window is obviously open. I already have two pull request for 4.12 in my inbox, I expect that overnight I’ll get a lot more. Linux 4.10 added Virtual GPU support, perf c2c’ tool, improved writeback management, a faster initial WiFi connection […]

April 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

SolidRun MACCHIATOBin Mini-ITX Networking Board is Now Available for $349 and Up

SolidRun MACCHIATOBin is a mini-ITX board powered by Marvell ARMADA 8040 quad core Cortex A72 processor @ up to 2.0 GHz and designed for networking and storage applications thanks to 10 Gbps, 2.5 Gbps, and 1 Gbps Ethernet interfaces, as well as three SATA port. The company is now taking order for the board (FCC waiver required) with price starting at $349 with 4GB RAM. MACCHIATOBin board specifications: SoC – ARMADA 8040 (88F8040) quad core Cortex A72 processor @ up to 2.0 GHz with accelerators (packet processor, security engine, DMA engines, XOR engines for RAID 5/6) System Memory – 1x DDR4 DIMM with optional ECC and single/dual chip select support; up to 16GB RAM Storage – 3x SATA 3.0 port, micro SD slot, SPI flash, eMMC flash Connectivity – 2x 10Gbps Ethernet via copper or SFP, 2.5Gbps via SFP, 1x Gigabit Ethernet via copper Expansion – 1x PCIe-x4 3.0 slot, Marvell […]