ubuntu

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Tiny Rock Pi S SBC gets PoE & audio HAT add-on board

Tiny Rock Pi S SBC gets PoE & audio HAT add-on board

Rock Pi S PoE HAT

Powered by a Rockchip RK3308 quad-core Cortex-A35 processor, Radxa Rock Pi S single board computer was launched with specifications listing PoE support via an add-on board. Just one little problem though: it was not available for sale. The good news is that Radxa has now launched a PoE HAT for the Linux SBC adding support for 802.3af PoE up to 10W input, making it one of the smallest single board computers with PoE support in the world, and adding audio features with a 3.5mm audio jack, and an FPC connector for a microphone array. It can be purchased on Seeed Studio for $13.00. Here are the specifications of the complete solution with Rock Pi S SBC and PoE HAT: SoC – Rockchip RK3308 quad-core Arm Cortex-A35 processor @ up to 1.3 GHz with built-in Voice Activity Detector (VAD) System Memory – 512MB RAM Storage – 1GB SD NAND flash, MicroSD […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Intel Tiger Lake UP3 COM Express Module Offers High AI Performance, PCIe Gen4 Interface

Intel Tiger Lake UP3 COM Express Module Offers High AI Performance, PCIe Gen4 Interface

cExpress-TL Tiger Lake UP3 COM Express Module

Earlier today, Intel announced the Elkhart Lake IoT edge processor family, and as well as more 15W Tiger Lake Core i3/i5/i7 UP3 processors designed for IoT & embedded applications, and with a configurable TDP from 12W to 28W. ADLINK Technology is leveraging existing and those new Tiger Lake UP3 processors with the cExpress-TL COM Express Type 6 module based on the various Intel Core i7/i5/i3 and Celeron Tiger Lake UP3 SKUs delivering three times the AI inferencing performance of older platforms thanks to AVX-512 Vector Neural Network Instructions (AVX512 VNNI) instructions and equipped with the latest PCIe Gen4 expansion interface. cExpress-TL COM Express Tiger Lake module specifications: SoC (one or the other) Intel Core i7-1185G7E quad-core/octa-thread processor with 12MB cache, Intel Iris Xe graphics with 96x EU; up to 28W TDP (cTDP 15W) Intel Core i5-1145G7E quad-core/octa-thread processor with 8MB cache, Intel Iris Xe graphics with 80x EU; up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Gateworks Venice Industrial IoT SBC Family Features Dual Ethernet and mPCIe Sockets

Gateworks Venice Industrial IoT SBC Family Features Dual Ethernet and mPCIe Sockets

Gateworks Venice GW7300 SBC

US-based Gateworks is known for its Ventana and Newport embedded networking single board computers, and the company has now introduced a third family with Venice SBC family based on NXP i.MX 8M Mini SoC with support for multimedia capabilities through MIPI-DSI, MIPI-CSI and I2S Audio headers, and targetting industrial IoT with dual Ethernet, and mini PCIe expansion sockets that can be used for 802.11ax/ac/b/g/n WiFi, 5G/4G/3G/CATM1 cellular modems, and more. The company plans to introduce four different models with GW7100, GW7200, GW7300, and GW7400 with an increase in size and feature set for each model, and mechanically compatible with previous Gateworks families. But at launch, only GW7300 SBC is available so we’ll focus our reporting on this particular model. Gateworks GW7300 specifications: SoC – NXP i.MX 8M Mini single, dual or quad-core Arm Cortex-A53 processor @ up to 1.6GHz, with Arm Cortex-M4 at 400+MHz, 3D GPU (OpenGL ES 2.0), 2D […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on TechNexion Unveils EDM and AXON SoM’s Powered by NXP i.MX8M Plus SoC

TechNexion Unveils EDM and AXON SoM’s Powered by NXP i.MX8M Plus SoC

AXON-E-IMX8M-PLUS

A few days ago we wrote about Variscite’s NXP i.MX 8M Plus-powered AI systems-on-modules and devkits, and now it’s TechNexion’s turn to introduce its own SoM’s for artificial intelligence applications. Just like variscite, the company has two variants with EDM-G-IMX8M-PLUS following the EDM standard with a 260-pin edge connector, and AXON-E-IMX8M-PLUS part of the AXON family with board-to-board connectors better suited to vibration-prone applications. Besides the form factor and different default storage  capacities, both SoM’s share the same specifications: SoC – NXP i.MX8M Plus quad-core Cortex-A53 processor @ up to 1.8 GHz with Cortex-M7 real-time core @ 400 MHz, Vivante GC520L 2D GPU, Vivante GC7000UL 3D GPU, 1080p60 hardware decoder (HEVC, H.264, VP9, and VP8) and encode (H.265/H.264), and 2.3 TOPS NPU System Memory – Up to 8 GB LPDDR4 Storage AXON-E-IMX8M-PLUS – 32 GB eMMC flash by default EDM-G-IMX8M-PLUS – 16 GB eMMC flash by default Networking Chips Qualcomm […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on IP69K-Rated Stainless Steel Panel PCs Run Windows 10 or Ubuntu 16.04

IP69K-Rated Stainless Steel Panel PCs Run Windows 10 or Ubuntu 16.04

IP69K Stainless Steel Panel PC

There are already several industrial dust and waterproof panel PCs on the market, but with its Intel Apollo Lake powered Titan-AL Series, ADLINK goes a step further with IP69K-rated stainless steel panel PCs that provide resistance against corrosion from all sort of chemicals. Titan-AL series panel PCs can be washed with high-pressure water or steam to meet high-hygiene standards required in special production environments including food, pharmaceutical, and chemical production. ADLINK Titan-AL series panel PC specifications: SoC  – Intel Atom x7-E3950 quad-core Apollo Lake processor @ 1.60 GHz  / 2.00 GHz (Boost) with Intel HD Graphics 505; 12W TDP System Memory – 4GB DDR3L default (up to 8GB) Storage – 2.5″ SATA drive bay Available Displays Configurations Titan-15W-AL – 15.6-inch display with 1366 x 768 resolution, optional capacitive touchscreen; viewing angle: 80/80/85/85° (U/D/R/L) Titan-21W-AL – 21.5-inch display with 1920 x 1080 resolution, optional capacitive touchscreen; viewing angle: 89° in all […]

Posted on by Ian W MORRISON (Linuxium) - 7 Comments on Intel NUC 9 Extreme “Ghost Canyon” Kit – NUC9i9QNX Review

Intel NUC 9 Extreme “Ghost Canyon” Kit – NUC9i9QNX Review

NUC9i9QNX Review

I’ve previously written about Intel’s (relatively) new NUC 9 range of mini PCs and now I am following up with my experiences of having bought one. Whilst I’ll cover some performance metrics from both Windows and Ubuntu I’ll also discuss the benefits and drawbacks of using either OS together with a comparison of gaming, thermals, and power usage as well as a brief look at overclocking potential and implications together with highlighting the issues encountered. NUC9i9QNX Hardware Overview The model I purchased and will be reviewing here is the NUC9i9QNX from Intel’s Ghost Canyon lineup and is formally known as the Intel NUC 9 Extreme Kit – NUC9i9QNX. It contains a “Compute Element” with an i9-9980HK which is an eight-core 16-thread 2.40 GHz processor boosting to 5.00 GHz with Intel’s UHD Graphics 630. The full specifications of the NUC9i9QNX include: The NUC9i9QNX is sold as a kit which essentially means […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on How to Fix Unreliable USB Hard Drives, Stalled Transfers in Linux

How to Fix Unreliable USB Hard Drives, Stalled Transfers in Linux

Fix USB Hard Drive Stalled Linux

Last June, I reviewed a Ryzen Embedded SBC with Windows 10, and the USB hard drive I normally use for review had all sorts of problems including very slow speeds and/or stalled transfers but no error messages. Last week, I tried again by installing Ubuntu 20.04 on the same Ryzen Embedded SBC, and the USB hard drive had troubles again, so just assume there were some hardware incompatibility issues between the SBC and the drive, and there may not be a fix or workaround. Sometimes, it’s indeed a hardware issue with the drive getting too many bad blocks, and if that’s the case, and the drive is still under warranty you can return it and get a fresh new (or refurbished) drive for free. But that drive was still working with my laptop getting around 100MB/s. So I ran out of ideas until numero53 commented he had similar problems with […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 23 Comments on AMD Ryzen Embedded SBC Review with Ubuntu 20.04

AMD Ryzen Embedded SBC Review with Ubuntu 20.04

AMD Ryzen Embedded Ubuntu 20.04

Last June, we reviewed DFI GHF51 Ryzen Embedded R1606G SBC with Windows 10 Enterprise LTSC. We had to send back the board to Taiwan, as the company wanted to double-check some of the issues we reported, and we got the board to review it with Ubuntu 20.04. So I downloaded Ubuntu 20.04.1 ISO flashed it to a USB flash drive, and could install it on the eMMC flash drive without issue. I selected to keep Windows 10, so I have a dual-boot system on a 32GB eMMC flash. Yes, I do like a challenge! 🙂 DFI GHF51 Ubuntu 20.04 System Info We can check some of the information from the system in the terminal:

So I have a 7.9GB partition to play with Ubuntu 20.04.1, but I could do all tests without issues, although I had to remove Phoronix benchmark program and data after completing the benchmark. Features Testing […]