vorke News - CNX Software - Embedded Systems News

June 7, 2018June 7, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Vorke V5 Plus mini PC Sold for $199.99 (Promo)

Vorke V5 Plus is a mini PC powered by an Intel Celeron 3865U dual core Kaby Lake processor coupled with 4GB RAM and 64GB storage. Ian Morrison (Linuxium) reviewed the computer in “Vorke V5 Plus Kaby Lake Mini PC Review with Windows 10 and Ubuntu 18.04” post, and concluded that “overall the device performs extremely well. It is competitively priced and represents good value for money given the performance and flexibility”. The price at the time of the review (May) was $229.99 with coupon, but GeekBuying is now offering an even better deal as Vorke V5 Plus goes for $199.99 shipped with coupons VORKEV5P or VORKEPC7. Note that the promotion is limited to 50 units. Here’s quick reminder of the technical specifications: SoC – Intel Celeron 3865U Kaby Lake processor @ 1.80 GHz with Intel HD Graphics 610; 15W TDP System Memory – 4GB DDR4, upgradeable to 32GB (SO-DIMM slot) […]

February 6, 2018February 7, 2018 by Ian W MORRISON (Linuxium) - 4 Comments

Vorke V1 Plus Celeron J3455 Mini PC Review with Windows and Ubuntu

Most Intel based mini PCs use processors classified as ‘Mobile’ as these have lower thermal design power (TDP) ratings which is the maximum amount of heat generated by the processor: However, the new Vorke V1 Plus has incorporated a ‘Desktop’ processor namely the Intel Celeron J3455. On paper this processor looks like it should perform similar to the Intel Pentium N4200 processor but with a tradeoff between being a cheaper processor to purchase but more expensive to run due to the increased power requirements. Geekbuying provided a Vorke V1 Plus for review so let’s start by taking a look at the physical characteristics. The device comes in a plain box and was supplied with the ‘right AC Adapter’ for my country. The first observation is that it is quite a large device. At just over 6” square (153mm) and nearly 1.5” tall (38mm) it is the biggest mini PC I’ve […]

November 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Vorke Z3 Rockchip RK3399 TV Box Gets Android 7.1 Firmware

Earlier today, I discovered Cloudnetgo CR19 TV Box based on Rockchip RK3399 SoC and equipped with an external SATA port sold on GeekBuying. At first, I thought it was something completely new, but soon remembered that I had reviewed a very similar device: Vorke Z3. At the time of the review however, the device was pre-loaded with Android 6.0, and while performance itself was clearly at step up compared to other TV boxes, video playback was rather poor, and there were too many bugs to my taste. Then I realized that the new device came with Android 7.1, and a quick search revealed Vorke Z3 had also received an Android 7.1 firmware upgrade late September. That will be old news for some owners, but if you’ve gotten frustrated by your device while running Android 6.0, it may be worth checking out Android 7.1. If OTA firmware update from Android 6.0 […]

July 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Checking Out Dodocool DC30S USB type C Hub with USB 3.0 Ports, Power Delivery, HDMI Output, and Card Reader

I reviewed Vorke Z3 Android mini PC last month, the first mini PC I’ve received with a USB type C port capable of handling video output too. I could see support for dual HDMI displays in the firmware, but at the time I did not have a USB type C hub with HDMI output. But Dodocool sent me their DC30C USB type C hub so I’ve finally been able to give a try. Dodocool DC30S Specifications USB Input – 13 cm USB 3.1 Type-C cable USB Outputs – 3x USB 3.0 type A ports up to 5 Gbps; 1x USB 3.1 Type-C PD charging port Video Output – HDMI port Storage – SD & Micro SD card reader Dodocool DC30S Unboxing First the package which gives basic info about the USB hub. The device comes with a warranty registration card, and a multi-language user manual. One side comes with the […]

July 6, 2017July 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Vorke Z3 Rockchip RK3399 TV Box Review – Part 2: Android 6.0 Firmware

Vorke Z3 is another mini PC / TV box powered by Rockchip RK3399 hexa core processor with two Cortex A72 cores, and two Cortex A53 cores making it theoretically one of the fastest TV boxes on the market, excluding NVIDIA Shield Android TV which is well ahead of the competition, albeit with poor worldwide availability. I’ve have already shown Vorke Z3 hardware inside out, so in the second part of the review, I’ll focus on testing the firmware including video playback, and the system performance, and see how it compares to the similar Yundoo Y8, which I reviewed last month. First Boot, Setup, and First Impressions One the selling point of Vorke Z3 is its SATA connector, so I connected a 1TB 3.5″ SATA drive first, as well as Seagate USB 3.0 drive (1TB) to the USB 3.0 port, I also added a USB hub to connect a USB keyboard, […]

July 3, 2017July 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

How to Install RKMC “Kodi for Rockchip” App in your TV Box

I’ve started playing with Vorke Z3, an Android 6.0 TV box based on Rockchip RK3399 , and saying that Kodi 17.3 – installed from the Google Play Store – is not working so well is an understatement. The other Rockchip TV boxes I’ve recently reviewed with Android 6.0.1 such as Yundoo Y8 and A95X R2 are all using TVMC, a fork of Kodi 16.1 specifically designed for Rockchip devices. However, there’s no source code for that app, but a Rockchip engineer is maintaining his own fork of Kodi, with the code and some binaries libraries released on Github. The project is called RKMC. I did install the app, but I misunderstood part of the instructions at first, and the device would not boot anymore. I lost many hours of work, as I had to reflash the firmware. So I’ll show how I installed it in Vorke Z3 TV box. You […]

June 6, 2017July 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Review of Vorke Z3 Android Mini PC with SATA – Part 1: Unboxing & Teardown

After Yundoo Y8 review, I’ve received another Rockchip RK3399 mini PC for review: Vorke Z3, which was sent to me by GeekBuying. Both devices are quite similar for Vorke Z3 adds an external SATA interface, and two external high-gain antennas. I was also expecting Android 7.1 Nougat on Z3, but I’ve been told the current SDK has too many bugs, so the device still ships with Android 6.0.1. I’ll start the review by looking into the hardware inside out, before reporting on my experience with the firmware in the second part in a few weeks. Vorke Z3 Unboxing The retail package is quite bland, but most people will probably not care a bit about this little detail. The devices ships with a 12V/2A power supply, a simple IR remote control, a HDMI cable, a SATA cable, and Vorke Z3 “4K media player” user manual. The device feels of good quality […]

December 20, 2016May 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Vorke Z3 Rockchip RK3399 TV Box to Launch in February 2017

I was expecting devices based on Rockchip RK3399 hexa-core processor to launch by the end of this year, that is about right now, but finally it looks like products will only start the show by the end of Q1 2017, as Firefly-RK3399 development board is scheduled to ship to backers in March 2017, while GeekBuying has started teasing us with their Vorke Z3 TV box powered by Rockchip RK3399 with 4GB RAM slated to launch in February 2017. [Update: Vorke Z3 is now up for sale for $169.99 including shipping] Vorke Z3 preliminary specifications: SoC – Rockchip RK3399 hexa-core processor with 2x ARM Cortex A72 cores at up to 2.0GHz, 4x Cortex A53 cores, and an ARM Mali-T860MP4 GPU System Memory – 4GB LPDDR3 Storage – 32GB eMMC flash, external SATA interface (hopefully implemented via the PCIe interface), micro SD slot Video Output – HDMI 2.0 up to 4K @ […]