CNX Software - Embedded Systems News

June 19, 2014June 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 95 Comments

Giveaway Week – Gbox Midnight MX2 Android Media Player

The fourth prize for this week is Matricom Gbox Midnight MX2, an Android TV box powered by Amlogic AML8726-MX dual core processor with 1GB RAM, 4GB flash, HDMI and AV output, optical S/PDIF, Wi-Fi and Ethernet, and 4 USB ports. The company had specifically worked on the XBMC port at the time, and I found it did a pretty good job. I tested the device in May of last, and I found the firmware to be very stable and responsive, and XBMC works as expected, supporting most video files without issues, except some MPEG-2 had aspect ratio issues,, RMVB files would make XBMC exit, and WebM 1080p could not be played smoothly due to software decode for this particular codec. It could decode all high-end audio codecs such as DTS and Dolby just fine. I did have problems with composite and component outputs but it must have been fixed now. […]

June 18, 2014June 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

CS918T Quad core Android TV Box with HD Webcam Sells for $60

CS918T is an Android TV Box powered by Rockchip RK3188 quad core SoC with the usual 2GB RAM, 8GB Flash, and various ports such as HDMI, USB, Ethernet, etc… that also features a 2MP webcam, and sells for just $59.99 including shipping on Aliexpress. The box does not appear to be related to CS918 / KR-42-1 that was popular a few months ago. CS918T technical specs: SoC – Rockchip RK3188 Quad core ARM Cortex A9 processor @ 1.6GHz with Mali-400MP4 GPU System Memory – 2GB DDR3 Storage – 8GB NAND Flash + micro SD slot up to 32GB Video Output – HDMI up to 1080p60, AV output Audio I/O – HDMI, AV, and microphone Connectivity – 10/100M Ethernet, WiFi 802.11 b/g/n, and Bluetooth 3.0 USB – 1x USB 2.0 host port, 1x micro USB OTG Camera – Built-in 2MP webcam Misc – Power and reset buttons, IR receiver. Power Supply […]

June 18, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$99 PCDuino3S is an AllWinner A20 Based Mini PC with a Steel Enclosure

LinkSprite has recently showcased PCDuino3S, a Linux / Android mini PC powered by AllWinner A20 dual core SoC, and with features similar to PCDuino3 development board. Possible applications include media player and thin client terminal for desktop visualization. PCDuino3S technical specifications: SoC – AllWinner A20 Dual Core ARM Cortex A7 @ 1 GHz + Mali-400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, internal microSD card slot for up to 32GB Video Output – HDMI 1.4 with HDCP support Audio Output – HDMI, 3.5mm headphone jack Connectivity – 10/100M Ethernet USB – 3x USB 2.0 host ports 1x micro USB OTG port Misc – 2x LEDs, power button Power supply – 5V/2A Dimensions – 12.7 x 6.35 x 2 cm The company provides images for Ubuntu 12.04 and Android 4.2. It should be software compatible with PCDuino3, but based on the “enclosure opening” video below, and the […]

June 18, 2014June 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

The BeagleBone Black Turns Blue with BlueSteel-Basic, Loses HDMI and Flash

CircuitCo has just introduced BlueSteel-Basic, a development board based on the Beaglebone Black but with a Blue PCB, no HDMI output, and no eMMC flash that’s destined to be used by OEMs in their products. LinuxGizmos also reports that BlueSteel-Basic is to be followed by BlueSteel-IT, an industrial temperature grade (-40 to 100°C) board based on the Beaglebone Black, and Bluesteel-Core, a computer-on-module (CoM) based on Ti Sitara AM335x that are scheduled for July 2014. Let’s checkout BlueSteel-Basic specifications: SoC – Texas Instruments Sitara AM3358BZCZ100 @ 1GHz (2000 MIPS) with PowerVR SGX530 3D GPU (20M Polygons/S) System Memory – 512MB DDR3L @ 800MHz Storage – micro SD slot Connectivity – 10/100M Ethernet (RJ45) USB – 1x USB 2.0 host port, 1x mini USB 2.0 port Debugging – Serial header and optional on-board 20-pin CTI JTAG Expansion Connectors Signals: Power 5V, 3.3V, VDD_ADC (1.8V) 3.3V I/O On All Signals McASP0, SPI1, […]

June 18, 2014June 20, 2014 by Jean-Luc Aufranc (CNXSoft) - 76 Comments

Giveaway Week – Measy U2C Android TV Dongle

Measy U2C, aka B12, will be the prize for day 3 of Giveaway week. It’s an HDMI & AV TV dongle powered by Rockchip RK3066 SoC with 1GB RAM, 8GB flash that happens to feature a 2MP camera for video conferencing as well. It’s running Android 4.1.x Jelly Bean. When I reviewed Measy U2C at the beginning of last year, I had some issues with USB mouse and keyboard support, the firmware could have been more stable, and the Antutu scores seem a bit on the low side, but Wi-Fi and video playback were both very good. It has received one or two firmware update since then, which may have fixed some of the bugs. The last firmware update must have been in April or May 2013, so it has not been a device greatly supported. To enter the draw simply leave a comment below. Other rules are as follows: […]

June 17, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Maynard is a Wayland based Lightweight Desktop Environment Designed for the Raspberry Pi and Lower-end Hardware

With 3 millions board already sold, the Raspberry Pi board is clearly the most popular ARM Linux development board, and must be one of the most successful Linux device that’s designed to run a Desktop environment. However, the Broadcom BCM2835 processor and lowly 512MB makes it hard to run fully fledge desktop environment such as KDE and Gnome, so most people run LXDE via Raspbian operating systems, and it is much more manageable. However LXDE does not support Wayland, which is supposed to replace the X windows system, and it may not look as nice as it could. So the Raspberry Pi foundation and Collaborra have worked together on a new desktop environment called Maynard that leverages Wayland, and is supposed to be “functional, light and pretty”. This Wayland implementation is based on Weston + GTK, and is using the hardware video scaler (HVS) found in Broadcom BCM2835 to make […]

June 17, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Onda V989 Tablet Powered by AllWinner A80T Achieves Close to 50,000 Points in Antutu

Teclast T97 was one the first tablet based on AllWinner A80, an octa-core CortexA15/A7 big.little processor with PowerVR G6230 GPU. It was announced way too early last December… There’s now another tablet much closer to an actual retail availability called Onda V989 featuring AllWinner A80T with a 9.7″ display and 2 or 4 GB RAM that come close to the top of the Antutu scoreboard with 48102 points. Unfortunately that’s all we know about this tablet at this stage. I’m not sure what A80T means, AllWinner A80 Tablet version?, or AllWinner A80 Turbo, with higher clock frequencies? There has also been some sort of silly season with benchmark related to AllWinner A80 with scores ranging from 23674 to 48102 points in Antutu as shown below for Onda V989. The low score was achieved when A80’s Cortex A15 cores were allegedly clocked at 1.2GHz , but it should be closer to […]

June 17, 2014June 19, 2014 by Jean-Luc Aufranc (CNXSoft) - 109 Comments

Giveaway Week – Mele X1000 Blu-Ray Navigation Android TV Box

For day 2 of Giveaway Week, I’ll list Mele X1000, an higher-end Android 4.4 Kitkat TV box with a metallic enclosure, and powered by Telechips TCC8935 dual core Cortex A9 SoC with 1GB RAM, 4GB flash, HDMI and AV outputs, an external SATA connector, Ethernet and Wi-Fi, as well as a few USB ports. The selling point of this box is that it can handle Blu-Ray navigation in XBMC. Since my review of Mele X1000 in March, the company has released new firmware via OTA updates, so the box has certainly improved. At the time of the review I found the hardware build to be of high quality, Wi-Fi performance to be really excellent, that it indeed supported Blu-ray ISO, and provided lots of advanced settings for video playback, but I could notice some unstabilities, XBMC was not pre-installed, SAMBA and NFS were not working, and some videos could not […]