CNX Software - Embedded Systems News

December 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

RK628D adds HDMI input, extra video outputs to Rockchip processors

If I’m asked about a Linux or Android platform with HDMI input, I would immediately think about Realtek RTD1295 SoC with products like Zidoo X9S or X2 TV stick which enabled picture-in-picture (PiP), UDP/TCP broadcast of HDMI input, or PVR functions. Some Rockchip boards such as Orange Pi RK3399 SBC do come with both HDMI output and HDMI input, with the latter relying on a Toshiba TC358749XBG HDMI interface bridge IC. But Rockchip has decided to design its own HDMI input chip with Rockchip RK628D supporting HDMI, parallel RGB or BT.1120 as input and dual MIPI, dual LVDS, GVI (general video interface), parallel RGB, or BT.1120 as outputs. The new chip would enable PCB designers to add display output ports to application processors such as RK3288 or RK3399, or add an HDMI input interface. Rockchip RK628D key features and specifications: Video input interfaces HDMI 1.4/2.0 RX interface up to 4Kp60 […]

December 20, 2020 by Abhishek Jadhav - No Comments

AWS IoT Core for LoRaWAN launched with asset tracking and smart building kits

With increasing connectivity issues on low-power devices, which transmit data over long-range, work on batteries that can last several years without replacement, LoRaWAN is one of the major solutions to address these issues as it has support in Zephyr OS as well. A couple of days back, Amazon Web Services announced AWS IoT support for LoRaWAN, which means that it will enable you to connect and manage low-power wireless devices that use LoRaWAN connectivity with the AWS Cloud. Now the enterprises can set-up a private LoRaWAN network by connecting the devices to the AWS Cloud. AWS Cloud basically accelerates IoT application development by acting on the data generated by connecting LoRaWAN devices using AWS services. “The rapid acceleration of growth in both private and public LoRaWAN networks has been key in the expansion of LoRaWAN deployments worldwide. AWS’ launch of AWS IoT Core for LoRaWAN offers an innovative solution to […]

December 20, 2020January 11, 2022 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

ESP32-C3 WiFi & BLE RISC-V processor to launch at ESP8266 price

[Update December 2020: While we first reported ESP32-C3 would be pin-to-pin compatible to ESP8266 based on the tweet mentioned in the post, the datasheets show both are clearly not pin-to-pin compatible, and instead it looks like the goal is to provide pin-to-pin compatible modules] When we reported about ESP32-S2-MINI modules last September, we also noted Espressif teased us with ESP32-S3 and ESP32-C3 with close to no details. ESP32-S3 is expected to be a multi-core WiFI & Bluetooth processor with AI instructions/accelerator, but there were no details about ESP32-C3 at all, and we only found out it would be a RISC-V processor several weeks ago. But Twitter user Johnny Wu posted a screenshot in Chinese and its translation claiming ESP32-C3 was finally released by Espressif Systems. [Update: The datasheet has been released. See comments.] ESP32-C3 WiSoC is pin to pin compatible with ESP8266, works with ESP32 development framework (e.g. ESP-IDF), supports […]

December 19, 2020December 19, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

TerraPi modular case system for Raspberry Pi supports multiple SSD’s, DIN rail, horizontal & vertical mounts

TerraPi modular mounting system Raspberry Pi

We already have many cases for Raspberry Pi SBC’s. Besides the official one, we already have third-party enclosures such as a KKSB compact fanless metal case for Raspberry Pi 4, Argon One enclosure brings all ports from the SBC to the side, as well as a variant for M.2 SSD’s, and even DIN rail enclosures. But here are more options as INUX3D, a design studio and 3D printing facility based in Slovakia, decided to create its own 3D printed modular case system for Raspberry Pi. The TerraPi module enclosure system supports passive and active cooling, up to two 2.5-inch SSD’s or HDD’s, as well as horizontal or vertical mounting, and there’s also a DIN rail option. Apart from the fanless model targeting uniquely the Raspberry Pi 4 SBC, all TerraPi enclosures also work with Raspberry Pi 3 B/B+ models and are especially suited for people wanting to use the board […]

December 18, 2020December 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Picovoice supports custom wake word, offline voice recognition on Raspberry Pi

ReSpeaker 4-mic array is a Raspberry Pi HAT with four microphones that can work with services such as Google Assistant or Amazon Echo. It was launched in 2017. So nothing new on the hardware front. What’s new is the expansion board is now supported by Picovoice that works much like other voice assistants except it allows people to create custom wake words and offline voice recognition. Picovoice is described as an end-to-end platform for building customized voice products with processing running entirely on-device. It is cross-platform, is said to be more resilient to noise and reverberation, and thanks to running offline, it offers low-latency and complies with HIPAA and GDPR privacy regulations. The platform is comprised of two main engines: Porcupine lightweight wake word engine that supports custom wake words trained through PicoVoice console. The engine can listen to multiple wake words and is cross-platform with support for Raspberry Pi, […]

December 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Onion Tau is an affordable 3D depth LiDAR camera (Crowdfunding)

Onion is better known for its Omega IoT boards running OpenWrt, but the company has now come up with a completely different product: Onion Tau 3D depth camera equipped with a 160×60 LiDAR sensor. The device plugs like a USB webcam to a host computer or board, but instead of transferring standard images, the camera produces 3D depth data that can be used to detect thin objects, track moving objects, and be integrated into other applications leveraging environment mapping such as SLAM (Simultaneous localization and mapping). Onion Tau LiDAR camera (TA-L10) specifications: Depth technology – LiDAR Time of Flight Depth stream output – 160 x 60 @ 30 fps Depth range – 0.1 to 4.5 meters Depth field of view (FOV) – 81˚ x 30° Grayscale 2D camera image sent with 3D depth map data Host interface – USB Type-C port Dimensions – 90 x 41 x 20 mm; 4x […]

December 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

When USB-C to USB-A adapter meets USB PD charger…

USB-C PD charger and USB-C to USB-A adapter

MINIX NEO P1 is a 66W USB-C power supply/charger that can handle up to 3 devices, but I’m already using its big brother NEO P2 (100W) to power single board computers or other compatible devices that I may have to review. So instead, I plugged it in my bedroom’s power extension since it’s so tiny and provides three extra USB ports for charging devices. The problem is that two of those are USB-C ports, and I don’t own any USB-C to USB-C cable, so I went shopping for such cables, but soon realized I could probably “save money” by purchasing USB-C to USB-A adapters for less than one dollar each as I already own several USB-A to USB-C / micro USB cables. I got two of those and inserted them in the tiny USB PD charger. Spacing between the two USB-C ports was wide enough to the adapter fitted just […]

December 17, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Cmsemicon ANT32RV56xx is a RISC-V microcontroller for wireless charging

We’ve seen RISC-V architecture used in general-purpose microcontrollers, AIoT processors, as well as WiFi and Bluetooth IoT SoC’s such as ESP32-C3 and BL602. Allwinner is also prepping a RISC-V application processor, and we’ve covered plenty of other developments in our RISC-V 2020 highlights post. But we’ve now been made aware of another application-specific RISC-V microcontroller from a Chinese fabless vendor I had never heard of. Meet Cmsemicon ANT32RV56xx RISC-V microcontroller for wireless charging applications. Cmsemicon ANT32RV56xx “tentative” key features and specifications: MCU Core – RISC-V RV32EC core @ 48MHz 32-bit hardware divider (HWDIV) Memory – Up to 32KB ILM-SRAM, up to 8KB DLM-SRAM Storage – 64KB program FLASH (APROM+BOOT), 1KB FLASH data area Peripherals Up to 46 I/Os 6x Enhanced PWM (EPWM) 1x I2C, 1x SPI/SSP, 2x UART Up to 20x 12-bit ADC up to 100Ksps Up to 20x 12-bit ADC up to 1.2 Msps Capture/compare/pulse width modulation for up […]