CNX Software - Embedded Systems News

June 20, 2018June 20, 2018 by Karl Johnson - 1 Comment

YouTube Streams 1 & 2 Update, Plus Quick Fix for Uneven X Gantry

Hey Karl here with an update on the YouTube Live streams from last week. Live Streams Update The 1st stream went about as well as I expected….Not very well. I was really nervous and I broke the live link that was posted on here at the last minute. My whole reasoning for the Livestream was to show the processes in real time and not do too much footwork ahead of time. On the first one I was planning on migrating from Marlin 1.1.6 to Marlin 1.1.8 but I had already done lol… So I ended up migrating to the bugfix branch which presented additional challenges. Overall it was successful and I hope I conveyed the process. I was able to get it to print but I ended up going back to 1.1.8 due to some error in the bugfix branch that caused weird jittery movement. I will in the future […]

June 20, 2018June 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Dual Display Laptop Made Possible with DUO Add-on Display (Crowdfunding)

I’m using a dual monitor setup at home since it’s just more convenient and increases productivity, but when I’m on the go, I have to revert to the single screen on my laptop. The guys at Mobile Pixels decided it was not good enough, and worked on providing a solution that allows you to take that dual display setup on the go. This gave birth to DUO, a screen that attaches to the back of your laptop, and that you can slide to the left or right of your laptop’s screen to add another display whether you may happen to be. DUO display specifications: Display Size & Resolution – 12.5″, 1920×1080 pixels Rotation – 270º full rotation, 180° presentation mode Connection – USB type C for power and video signal Power Consumption – 1.6 Watts; 0.3W in “rest mode”. Dimensions – 32.5 x 21.8 x 1.2 cm (ABS plastic) Weight […]

June 19, 2018June 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Onenuts 4G LTE TV Box Comes with Optional Battery and Zigbee Connectivity

In some countries, especially in the Middle Easy and Africa, 4G LTE is a popular way of getting broadband Internet, and in the past we covered several 4G LTE TV boxes running Android such as WeTek Hyperion, SDMC DV8230-AP LTE, or Geniatech ATV329. Shenzhen Tomato now offers another options with their “Onenuts 4G-LTE Android OTT Set-Top Box” powered by Amlogic S905X processor, and that happens to come with a compartment for optional batteries. Onenuts 4G LTE TV box specifications: SoC – Amlogic S905X quad core Arm Cortex-A53 processor @ 1.5 GHz with penta-core Mali-450 GPU System Memory – 1GB or 2GB Storage – 8GB, 16G, or 32G eMMC flash; micro SD card slot Video Output – HDMI 2.0a up to 4K UHD @ 60 Hz, AV output (composite) Audio – Video – 10-bit H.265 & VP9 Profile 2 4K @ 60fps, H.264 4K @ 30fps, AVS+ & H.264 1080p60 Connectivity […]

June 19, 2018June 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$10 H801 WiFi RGB LED Controller Supports Sonoff-Tasmota Open Source Firmware

This week-end, I played with ANAVI Light Controller, an open source hardware solution based on ESP8266 used control 12V RGB LED strips. The board has the advantage of being open source with KiCad schematics, Arduino firmware, and HTML5 server program available, so easy to get started and modify the features as you see fit, and it also supports external I2C sensors via three headers. That’s a low volume project made in Eastern Europe and as a result the board costs $25, so I was shortly made aware there were cheaper solution, and if you are ready to mess around a little bit, H801 WiFi controller appears to be one of the most interesting solution as it sells for under $10 shipped on Aliexpress or eBay, and is officially supported by Sonoff-Tasmota open source firmware. H801 specifications: Connectivity – 802.11 b/g/n WiFi (2.4GHz) with about 10 meter range Output – 5x […]

June 19, 2018June 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

ODROID-GO is an Arduino Compatible, ESP32 based Portable Gaming Console Kit

When I first saw Hardkernel made ODROID-GO portable gaming console, I immediately thought they did a Linux device ala PocketCHIP, since so far the company has only designed Android & Linux development board. But ODROID-GO game console is actually based on Espressif ESP32 WiSoC, programmable with the Arduino IDE, and launched to celebrate Hardkernel’s 10-year anniversary. ODROID-GO specifications: SoC – Custom ESP32-WROVER module with ESP32 SoC @ up to 240 MHz, 16 MB Flash, and 4MP PSRAM Storage – micro SD card slot connected via SPI Display – 2.4″ 320×240 TFT LCD (SPI) Connectivity – WiFi 802.11 b/g/n 2.4GHz – 2.5GHz, Bluetooth 4.2 BR/EDR, BLE Speaker – 0.5Watt 8Ω Mono USB – 1x micro USB port for charging (500mA) and USB-UART communication Expansion Port – 10-pin header with I2C, GPIO, IRQ at 3.3Volt Misc – Buttons: Menu, Volume, Select, Start, A, B, Direction Pad Battery – 3.7V/1,200mAh Li-Polymer good for […]

June 18, 2018June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Three Add-on Boards for UP Board and UP Squared – UP-AUDIO HAT, UP-CAMERA HAT, UP-POE HAT

AAEON has announced three add-on boards for their Intel based UP board (Cherry Trail) and UP Squared board (Apollo Lake): UP-AUDIO HAT – Features external ports for a microphone and speakers/headphones UP-CAMERA HAT – Comes with two FPC/FFC connectors for 2M security camera UP-POE HAT – Adds WAN and LAN Gigabit Ethernet ports and PoE support UP-AUDIO HAT AAEON’s UP-Audio HAT currently only works with UP board, and features the following: Audio Codec – Realtek ALC5672 3.5mm Audio Jacks – 1x Line out, 1x MIC Headers – 2x speaker Built-in Components – 2x digital microphones, 1x buzzer Connects to board via 40-pin GPIO female header Dimensions – 85 mm x 56 mm The board is supported in Windows 10, Android 6, and Ubuntu 16.04. UP-CAMERA HAT The camera board works with UP Board, UP Squared and UP Core boards. UP-CAMERA HAT specifications & features: 2x MIPI CSI-2/ DSI DPHY Re-timer […]

June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Digitize Handwritten Notes with a $10 LCD Writing Pad and CamScanner App

Despite writing about high-tech technology with processors, software, IoT, artificial intelligence news everyday, I’m still very much a pen and paper kind of guy when it comes to taking notes. But this morning, I figured out it’s possible to digitize your notes on the cheap without having to use actual ink and paper, as 8.5″ digital LCD writing pads now cost as little as $10 shipped, and although those are pretty dumb devices with just an erase button and no connectivity nor storage, you can “scan” your notes using CamScanner app for Android and iOS. Specifications for the $10 model: 8.5″ LCD display with 25%-30% reflective ratio Pen Input pressure – 10-20g Power Supply – CR2016 button battery (included) Dimensions – 228 x 147 x 5mm (ABS plastic) Weight – About 110g This will reduce the amount of paper you use and store, and possibly have a positive impact of […]

June 18, 2018December 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ALLDOCUBE KNote5 Gemini Lake Tablet Runs Windows 10 on a 11.6″ Display

Intel Gemini Lake processors have already been seen in several mini PCs such as Intel June Canyon NUCs, as well as some laptops from Acer, Jumper, and others, but ALLDOBUCE brings us what looks to be the first Gemini Lake tablet with KNote5 model equipped with a Intel Celeron N4100 processor, 4GB RAM, 128 GB storage, and a 11.6″ display. ALLDOCUBE KNote5 specifications: SoC – Intel Celeron N4100 quad core Gemini Lake processor @ 1.10 GHz / 2.40 GHz (Boost) with Intel UHD graphics 600 ; 6W TDP System Memory – 4 GB LPDDR4 Storage – 128 GB internal storage (SSD?), micro SD card slot up to 128 GB Display – 11.6″ FHD (1920×1080) IPS display with 10-point capacitive touchscreen Audio – Dual speaker, microphone, 3.5mm audio jack Connectivity – Dual band 802.11 b/g/n/ac WiFi and Bluetooth 4.0 USB – 1x USB type C port Camera – 2.0MP front-facing camera […]