Processors Category - Page 859 of 1188 - CNX Software

February 29, 2016March 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

ODROID-C2 64-Bit ARM Development Board is Now Available for Purchase for $40

ODROID-C2 is a quad core 64-bit ARM development board based on Amlogic S905 processor with 2GB RAM that was planned to launch in early March, but maybe unsurprisingly, Hardkernel decided to launch their latest board, the very same day as Raspberry Pi 3 launch. We already knew the specifications, but it’s always useful to mind ourselves of the details: SoC – Amlogic S905 quad core cortex-A53 processor @ 2.0 GHz with 3+2 cores Mali-450 GPU System Memory – 2GB DDR3 SDRAM Storage – eMMC module socket with 8, 16, 32, or 64GB module by Toshiba or Sandisk + micro SD slot supporting UHS-1 SD cards. Video Output – HDMI 2.0 up to 4K @ 60 Hz Connectivity – Gigabit Ethernet (Realtek RTL8211F) USB – 4x USB 2.0 host ports + micro USB OTG port Expansion Header 40-pin header with GPIO, I2C, UART, and ADC ; All I/Os are 3.3V, except […]

February 29, 2016February 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 32 Comments

Raspberry Pi 3 Board is Powered by Broadcom BCM2837 Cortex A53 Processor, Sells for $35

Raspberry Pi 3 board was first found on the FCC website, and thanks to various other leaks we had a pretty good idea of the board specifications including a Broadcom 64-bit ARM processor coupled with 1GB RAM, WiFi and Bluetooth, as well as basically the same features and ports as Raspberry Pi 2 Model B. But with the fourth anniversary of the Raspberry Pi Model 1 board, Raspberry Pi 3 has now officially been launched, and you can now purchase the board for $35. Raspberry Pi 3 specifications: SoC – Broadcom BCM2837 64bit ARMv8 quad core Cortex A53 processor @ 1.2GHz with dual core VideoCore IV GPU @ 400 MHz supporting OpenGL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure System Memory – 1GB LPDDR2 Storage – micro SD slot Video & Audio Output – HDMI 1.4 […]

February 28, 2016November 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 231 Comments

Review of K1 Plus Android TV Box with Combo DVB-S2/DVB-T2 Tuner

VideoStrong has launched K1 Plus TV box powered by Amlogic S905 processor last year, and I had the chance to review their model last November. But here I am reviewing K1 Plus again. Why? That’s because the company’s has several K1 Plus models: the “standard” version that’s just like any Android TV boxes, and the DVB version with DVB-S2, DVB-T2/C, or DVB-T2/C + DVB-S2 combo, and the latter is the one I’m reviewing today. K1 Plus DVB combo teardown revealed that the main board was exactly the same as K1 Plus “standard”, and that only a tuner card was added. So I’ll have a two part review with the first part checking if they fixed any of the bugs found on K1 Plus “Standard” with “November 2015” firmware in the new “January 27, 2016 DVB” firmware, and the second part will focus on testing DTV app with DVB-S2 and DVB-T2, […]

February 27, 2016February 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 75 Comments

Raspberry Pi 3 Model B Board Features a 64-Bit ARM Processor, Adds WiFi and Bluetooth Connectivity

The Raspberry Pi foundation is working on yet another model of the popular Raspberry Pi boards, as the Raspberry Pi 3 model B board has showed up on the FCC website. The new board looks very similar to Raspberry Pi 2 model B, but adds on-board WiFi 802.11 b/g/n (2.4GHz only) and Bluetooth 4.0. Let’s play “spot the difference” with Raspberry Pi 2 at the top and Raspberry Pi 3 under. The processor looks the same as the BCM2836 quad core Cortex A7 SoC found on model 2 B, but one redditer claims it could be a 64-bit processor due to some MagPi ad. [Update: that’s the MagPi ad which confirms Raspberry Pi 3 will feature a 64-bit ARM processor @ 1.2 GHz. Thanks Gabe! ] We’ll find the WiFi/BT chip antenna on the top left corner, and two through holes on the right of the 40-pin connectors, likely the […]

February 26, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Variscite DART-SD410 Snapdragon 410 SoM Comes with WiFi 802.11 b/g/n, Bluetooth 4.1 & GPS

Qualcomm Snapdragon 410 is the 64-bit ARM processor used in DragonBoard 410c 96Boards platform, but it’s also found in several phones, some single board computers such as Inforce 6309, and we’ve also seen it in system-on-modules includes Graperain G8916 and Intrinsyc Open-Q 410. Variscite has developed their DART-SD410 system-on-module based on the processor with up to 2GB RAM, up to 16GB storage, and on-board 802.11b/g/n WiFi and Bluetooth 4.1. DART-SD410 module specifications: SoC – Qualcomm Snapdragon 410 quad core Cortex A53 processor @ 1.2GHz with Adreno 306 GPU @ 400 MHz System Memory – 1 to 2GB LPDDR3 @ 533 MHz Storage – 8 to 16 GB eMMC 4.5 flash Connectivity – WiFi 802.11 b/g/n + Bluetooth 4.1 LE (WCN3620), GPS (WGR7640), and two u.FL antenna connectors Audio – PM8916 PMIC/Audio codec I/Os available via 2x 90-pin board-to-board connectors: Display 4-lane DSI up to 720p60/1080p30, 24-bit On-carrier DSI to HDMI […]

February 26, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Intel Celeron N3060 based Industrial Fanless Touch Panel Computer Supports SATA Drives

Axiomtek GOT5103W-845 is a new IP65 industrial touch panel PC with a 10.1″ display, an Intel Celeron N3060 dual core processor, up to 8GB RAM, dual Gigabit Ethernet, USB 3.0, and support for half-slim SATA and mSATA SSD drives. Specifications: SoC – Intel Celeron N3060 dual core processor @ 1.6GHz / 2.48 GHz (Turbo) with Intel HD graphics 400 with 12EU @ 320/600 MHz System Memory – 1 x 204-pin SO-DIMM DDR3L-1600 up to 8 GB Storage – 1x mSATA, 1x optional half-slim SATA SSD Display – 10.1″ WXGA TFT LCD with LED and projected capacitive touch screen; 350 nits; 1280 x 800 resolution Video Output – 1x HDMI port Audio – 1x Line Out, HDMI, 2x speakers Connectivity – 2x 10/100/1000Mbps (Intel i211AT), optional WLAN antenna USB – 2x USB 2.0, 2 x USB 3.0 COM ports – 1 x RS-232; 1 x RS-232/422/485 Expansion for storage, Wifi, GPRS/GSM, […]

February 26, 2016 by Karl Johnson - 20 Comments

Eny EM95 Amlogic S905 TV Box Review

CNXSoft has already taken some pictures of Eny EM95 Amlogic S905 TV box, so I’ll take over from here as I received my ENY EM95 today and I was excited. I have not got a new Android device in a while. First Impressions I opened it up to find a tiny box that has a display on it. Seems interesting. While booting it says boot and the rest of the time it shows the time in 24 hour format and a few other indicators that I didn’t find particularly useful. In the retail box is the device remote and HDMI cable and power supply. I noticed no micro or mini USB port to flash firmware. I don’t have a type A to type A cable so will need to pick one up. I was working from home today so I was able to open immediately and play with it for […]

February 25, 2016February 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

GPD Win Windows 10 Portable Gaming Console Launched on Indiegogo for $299

We already knew that GPD HK was working on a Windows 10 handheld gaming console powered by an Intel Atom x5-Z8500 Cherry Trail processor, and the company has now decided to launch what they now call “GPD Win” on Indiegogo for $299, and advertise it as a “5.5” Game Handheld Laptop”.GPD Win specifications: SoC – Intel Atom x5-Z8500 quad-core Cherry Trail processor @ 1.44/2.24 GHz (Burst) with Intel HD Gen8 graphics @ up to 600MHz System Memory – 4GB LPDDR3-1600 Storage – 64GB eMMC 4.51 flash + micro SD slot up to 128GB Display – 5.5″ capacitive touch IPS screen; 1280×720 resolution; Corning Gorilla Glass 3; full lamination technology Video Output- mini HDMI Audio – mini HDMI, 3.5mm headset jack, microphone and speaker; Realtek ALC5645 audio codec Connectivity – WiFi 802.11 b/g/n and Bluetooth 4.0 USB – 1x USB 3.0 port, 1x micro USB port HID – QWERTY keyboard with […]