Onenuts 4G LTE TV Box Comes with Optional Battery and Zigbee Connectivity

4G LTE TV Box Battery SIM Card

In some countries, especially in the Middle Easy and Africa, 4G LTE is a popular way of getting broadband Internet, and in the past we covered several 4G LTE TV boxes running Android such as WeTek Hyperion,  SDMC DV8230-AP LTE, or Geniatech ATV329. Shenzhen Tomato now offers another options with their “Onenuts 4G-LTE Android OTT Set-Top Box” powered by Amlogic S905X processor, and that happens to come with a compartment for optional batteries. Onenuts 4G LTE TV box specifications: SoC – Amlogic S905X quad core Arm Cortex-A53 processor @ 1.5 GHz with penta-core Mali-450 GPU System Memory – 1GB or 2GB Storage –  8GB, 16G, or 32G eMMC flash; micro SD card slot Video Output – HDMI 2.0a up to 4K UHD @ 60 Hz, AV output (composite) Audio – Video – 10-bit H.265 & VP9 Profile 2 4K @ 60fps, H.264 4K @ 30fps, AVS+ & H.264 1080p60 Connectivity 10/100M Ethernet Dual band WiFi 802.11b/g/n and Bluetooth 4.0 4G …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Realtek RTD1295 based X2 Android TV Stick Comes with HDMI Output, HDMI Input

Realtek RTD1295 processor is found in mid to high end 4K HDR TV boxes with interfaces like SATA, USB 3.0, as well as HDMI input used for PiP or video recording features. Devices equipped with the processor that come to mind include Zidoo X9S or EWEAT R9 Plus TV Box + NAS, both of which are full featured and fairly large devices, running Android 6.0 and OpenWrt. Shenzhen Tomato has unveiled another type of device based on RTD1295 processor: X2 HDMI TV dongle that features both HDMI output & HDMI input ports, and runs Android 6.0 (but not OpenWrt). X2 TV stick specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor @ 1.40 GHz with ARM Mali-T820MP3 GPU System Memory – 1 or 2GB DDR4 Storage – 8 or 16GB eMMC flash + micro SD slot Video & Audio I/O – HDMI 2.0a output, and HDMI 1.4 input Video Codec – 10-bit HEVC/H.265 up to 4K @ 60fps, H.264 …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

ONENUTS Nut 1 TV Box Specifications, Unbagging and Teardown

I first discovered Shenzhen Tomato’s ONENUTS brand through ONENUTS T1 3-in-1 projector, tablet, and mini PC, but the company has now launched a new product with ONENUTS Nut 1 Android TV box powered by Amlogic S912 processor, and the usual 2GB RAM and 16GB storage, but the product stands out a little thanks to its presentation as we’ll see below. ONENUTS Nut 1 Specifications The technical specifications are pretty much standard: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD slot up to 32GB Video Output – HDMI 2.0a up to 4K @ 60Hz with CEC and HDR support, and AV port (composite) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Connectivity – Gigabit Ethernet, dual band WiFi 802.11 b/g/n/ac, Bluetooth 4.0 USB – 2x USB 2.0 ports including one OTG port Misc …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

ONENUTS T1 Combines Projector, Tablet, and mini PC into one Device

ONENUTS T1 look reminds me of GOLE1 mini PC / tablet combo, and the device also features the same Intel Atom x5-Z8300 processor. However, the 8″ display is quite bigger, and more importantly it includes a mini DLP projector. ONENUTS T1 specifications: SoC – Intel Atom x5-Z8300 “Cherry Trail” quad core processor @ 1.44 GHz / 1.84 GHz with Intel Gen8 HD graphics (2W SDP) System Memory –  2 GB DDR3L Storage – 32 GB eMMC flash + micro SD slot up to 64GB Projector – 0.3″ TI DMD (DLP) + LED technology, 1280×720 resolution, 5.5″ to 81″ screen size, 300 lumens, 500:1 contrast ratio; lifetime: > 20,000 hours Display – 8″ capacitive touchscreen IPS display with 1280×800 resolution (16:10 aspect ratio) Video Output – HDMI 1.4 port Audio I/O – HDMI, 3.5mm headphone jack, built-in speaker Connectivity – 10/100M Ethernet, 802.11 b/g/n/ac Wi-Fi, and Bluetooth 4.0 LE USB – 1x USB 2.0 host port, 1x USB 3.0 port Sensor …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

SZTomato TVI Amlogic S905X Development Board to Support Android 6.0, OpenELEC 7.0, and Ubuntu 16.04

Shenzhen Tomato has been selling Android TV boxes for a few years now, but one of their next product will be a development board based on Amlogic S905X processor with 8GB flash, 2GB RAM, and the usual 40-pin Raspberry Pi header. SZTomato TVI development board specifications: SoC –  Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 (1GB or less as option) Storage – 8GB Samsung eMMC flash (other capacities as option)  + micro SD slot Video & Audio  Output – HDMI 2.0a up to 4K @ 60 Hz Connectivity – Fast Ethernet port, 802.11 b/g/n WiFi and Bluetooth 4.0 (Ampak AP6212) with IPEX connector USB – 2x USB 2.0 host ports with 500mA fuses, 1x USB type C port for power and USB devices (no video) Expansion header – 40-pin Raspberry Pi compatible header with USB, UART, I2C, ADC, PWM, JTAG, I2S, and GPIOs Misc -Blue …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Shenzhen Tomato X96 Amlogic S905X TV Box is Designed to be “Hooked” Behind Any Monitor or Wall Mounted

There are several solutions to mount a mini computer or TV box behind a display, and while VESA mount is one of them, your TV may not support it, so Shenzhen Tomato has come up with “magic tape” combined with an IR extension cable to help you hook their latest X96 TV box behind your TV. Let’s go through the main specifications first: SoC –  Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5GHz/2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 (option: 2GB) Storage – 8GB eMMC flash (option: 16GB) + micro SD card slot up to 64GB Video Output – HDMI 2.0a up to 4K @ 60 Hz, and AV port (composite video) Audio Output – HDMI, optical S/PDIF, AV port (stereo audio) Video Codecs – 4K VP9 @ 60 fps, 4K 10-bit H.265 @ 60 fps, 4K H.264 up to 30 fps Connectivity – 10/100M Ethernet, and 802.11 b/g/n Wi-Fi. No Bluetooth USB …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Rippl-TV V2 Android 5.1 TV Box Features an Android TV-like Launcher, Supports Widevine L1 DRM

The maker of Rippl-TV media player are back with Rippl-TV V2 featuring Amlogic S905 quad core Cortex A53 processor coupled with 1GB RAM and 8GB flash, but the most interesting part of this device is probably on the software side with support for two launchers: Rippl-TV and an Android TV-like launcher, as well as support for Winevine L1 DRM allowing for HD playback of online video services such as Netflix, and Google Cast. [Update: While the company confirmed support for L1 DRM, a trusted third party has claimed that L1 DRM is currently buggy on Amlogic S905… Update 2: The company replied and there’s still a bug with Netflix TV app] Rippl-TV V2 specifications: SoC – Amlogic S905 quad core 64-bit ARM Cortex-A53 processor up to 2.0 GHz with penta core ARM Mali-450 GPU up to 750Mhz+ System Memory –  1GB DDR3 Storage –  8GB eMMC flash + micro SD slot Video Output – HDMI 2.0 up to 4K @ …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Mini Review of G9C Android Media Player

Shenzhen Tomato sent me their G9C Android TV box at the beginning of December, but as Google Play was not working reliably in the first firmware, I decided to delay the review a little, and the company has provided a new working firmware a few weeks ago, and I’ve now taken the time to test some the main issues I normally find on Amlogic S905 Android TV box. I’ve also ready shown pictures of the device and the board, so today, I’ll only report my experience with the firmware. First Boot and First Impressions I’ve connected all necessary cables, and several USB devices include an harddrive and RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad. The device started automatically upon connecting the power, and on average the boot takes between 25 to 30 seconds. Not bad at all for an entry-level device. The launcher looks familiar… …and the list of apps as well (I …

Support CNX Software – Donate via PayPal or become a Patron on Patreon