How to Configure DVB-S2 and DVB-T2 Tuners in K1 Plus Android DTV Receiver

I have previously reviewed VideoStrong K1 Plus Android TV box, but the company also has another model with the exact same name “K1 Plus” that includes a combo DVB-S2 & DVB-T2 tuner. That’s rather confusing, but nevertheless, since I now have the tuner version of the device, I’ve installed the latest firmware, started to play with it, and today I’ll explain how to configure DTV app for both satellite and terrestrial digital TV reception.

Hardware Setup and DTV App

The first step is to connect both your satellite dish and indoor or outdoor TV antenna to the device, as well as all necesarry cables, and possibly a USB hard drive if you want to use PVR function.

K1_Plus_DVB-T2_S2_Connections

Now go to the list of apps start DTV app, or press the DTV button on the remote control.

Android_DTV_app

Each time the app starts you’ll be asked to select DVBT2 or DVBS2, and if you want to switch between one or the other, you’ll either need to exit the app and restart it, or press the DTV button.

K1_Plus_DVB-T2_DVB-S2

DVB-T2 Configuration

I’ll start with DVB-T2. The first time, you’ll be ask whether you want to scan for channels, to which you’ll likely answer yes, and be presented with the installation menu.

K1_Plus_DVB-T2_Installation

Now select “Auto Search”, and the scan should start.

K1_Plus_DVB-T2_Scan

I got 22 channels and no radio station. It’s done, and that part was easy.

K1_Plus_Thai_TV

However, if you are missing some channels, you may need to change the country/area because by default it is set to Europe. Press the remote control’s Menu key, select DTV preference->General settings->Area Setting.

K1_Plus_DVB-T2_Area_SelectionAnd select your Area or country from the list that includes Europe, Singapore, Colombia, Russian (sic.), Thailand, Germany, France, Spain, Italy, Sweden, Holland, England, Australia, New Zealand, and Taiwan. You’d have to repeat the scan if you change the country. I’ve done so with Thailand, and I got 30 channels instead of 22 channels, so you may to set your area before running the scan, unless “Europe” is what you need.

DVB-S2 Configuration

Satellite digital TV configuration starts the same way, except the installation menu is a little different.

K1_Plus_DVB-S2_InstallationEnter into Satellite List to select your satellite, in my case Thaicom 2.

K1_Plus_Satellite_ListYou can select multiple satellites if you wish, or/and your satellite dish is motorized. You can find the full list of pre-defined satellites in the video embedded at the end of this tutorial. You can also add your own, edit and delete pre-existing ones with the color button of the remote control. Now go back, select Multi Scan, make sure a green tick is shown on the line of your selected satellite(s), and press the Blue button on the remote control.

K1_Plus_DVB-S2_Blind_Scan_FTAChange Scan Type to Blind Scan, select FTA only (Free-to-Air) Channel Type, and All, TV or Radio for Service Type, and press OK to start the scan.

K1_Plus_DVB-S2_ScanOnce this is all done, you should a bunch a TV channels and radio stations. I eventually got 55 TV channels and 5 radio stations using Thaicom 2 satellite. Some of the TV stations have no video, maybe because the signal is weak as I have quite a long cable to bring DVB-S2 to my office, or some other issues as I have no trouble getting some HD channels.

The 5-minute video below shows the steps I went through for both DVB-T2 and DVB-2 configuration as explained in this post.

Videostrong K1 Plus with DVB-T2/DVB-S2 combo tuner is only listed on Alibaba for now, and not available for retail. But a salesperson from GearBest told me they should have it later this week. FWIW, the version without tuner us currently on sale for $36.89.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX Rockchip RK3588 mini-ITX motherboard

119 Replies to “How to Configure DVB-S2 and DVB-T2 Tuners in K1 Plus Android DTV Receiver”

  1. the DTV app seems quite stable to me this time and working nice
    but how about picture quality especially for SD content
    did TVHEADEND and CESBO (raspberry pi build) detect the tuners, if so it will be a very interesting box

  2. Hi,

    I am planning to buy a K1 (S805) DVB -S2 box. They have not mentioned anything about diseqc in the Aliexpress page. Does this kit support diseqc ?

    I have 4 dishes connected via a diseqc switch at the moment, and if this K1 box can do diseq, it will be very cool 🙂

    Thank you

    1. İ got this TV Box Today . but couldnot find my satellite in the pre-defined list , so added manually , then searched for channels ,then i got another satellite channels , im using diseqc for 2 LNB .

  3. @natsu
    My preference is to use OpemPLi (Enigma) for this . I already have a Broadcom based receiver (Cloud iBox), with a modified version of OpenPli, which runs really well:
    http://dev-boards.blogspot.co.uk/2014/12/now-this-is-what-i-call-media-player.html

    I want to switch to S805 because the Broadcom device kernel source for the above is closed, (and I hate Broadcom). Since Amlogic releases its source regularly, this will be an ideal platform. Hardkernel folks supports this chip too.

    The only confusing bit was the RF in / RF out connectors. Hence the question about Diseqc – as to how RF out will work with Diseqc.
    Thanks for the link to CESBO – looks very interesting, I will check it out 🙂

  4. @cnxsoft
    thanks

    @Lalith
    you’re welcome

    looking forward to your feedbacks

    in fact, those backends are the only things that can save this box regarding the pitty unstable firmware of videostrong, anyway if it doesn’t work I will wait for openelec release the only remaining solution

  5. Hi,

    Your video is pure nonesense I cannot see how the device work. Does it lag, picture quality, ease of use and time between shitching chanels.

  6. @cnxsoft

    My K1 DVB S2 receiver arrived last week, and I had a few hours to play with it.

    I can confirm diseqc works well; and I can tune to all TV and radio channels similar to my Clouid iBox,

    I noticed an odd behaviour in the DTV app, On a normal FTA scan , 2500+ TV and 350+ radio stations get added. The app only lists out the TV stations . – no radio stations listed. If I scan radio stations alone, then they get listed and I can listen to radio.

    How did this work out on your testing? How did you manage to listen to radio channels in your kit?
    The Cloud ibox remote has TV / Radio buttons ; so I can easily switch between .

    Is there a secret keypress to switch to radio ?
    Its a nice hardware – shame I cant get the radio via this app. I will try your OpenElec link this weekend
    Many Thanks

  7. The blue button toggles between TV and Radio – SPDIF output into amplifier, Dolby pass through works, and Its an awesome media player for £39.

    One thing I noticed is that android cant do ext3 /ext4 . The recorded videos from satellite is saved as a transport stream *.ts but mplayer did not recognise the video content.

    The kit has built in wireless, and Ethernet and both works well.

    Pressing 111111 in sat configuration menu brings up smartmedia and BISS menus.

    The satellite tuner is very good, picked up all the expected channels from my 4 dishes (and there is s lot of them ) .
    Blind scanning was infact very fast. I usually too impatient to run blind can on 4 satellites, but this kit found all channels under 1/2 hour

    Excellent product, and its so tiny, next to my other sat receiver kits.

  8. @cnxsoft
    The Astra UHD test channel doesn’t seem to play correctly on S805. Decodes audio but no Video.
    The Youtube 4k videos play correctly

    Does this test channel work on S905 ? .
    The transmission is at 10994H on 19.2E and 12441V on 28.2E

  9. @Lalith
    The blue button toggles between TV and Radio.

    Thank you! I couldn’t find the radio before. I’m using it as an satellite receiver. Works well! I only had to add the Astra satellites/transponders used here in western Europe. Cccamd works fine. No hickups. Zapping is really fast.
    Also Miracast works fine and easy.
    I’m very satisfied with the quality and the price.

  10. Pour info , le KI plus dvb s2/t2 fontionne en 4K sur tous les satellites recevables en France . il y a des bugs sur le canal demo 4K de hot bird (13°E ) et sur Fransat 4K.

  11. @danricko
    The 4K bugs are most likely due to the Amlogic S905 revision used, as there’s a known bug with 4K DVB-S2 on S905 prior to revision C. I don’t know how to check the revision of the processor yet.

  12. hi i have k1 plus s905 dvb s2\t2 ….. please the dtv app Does not support Arabic language for the menus and settings how can I get the Arabic language version and I need to communicate with the developer to implement DTV and How do I make the device when operating DTV opens automatically instead of display screen icons and main applications thanks

  13. Hi i got my k1 plus box and put it on the cable. I live in the netherlands and have a cccam whit 3 clines. How can i got this work and watch tv ?please someone have a guide for me?

  14. I’am from Colombia, I just recieved the box but dtv no find any digital HD channel and radio channel either. The S and Q on scan, show 99%. It has the lastest firmware.

    The old k1 tuned without problems.

    1. Did you solve your problem with colombia dvbt2? Im also from Colombia i need your help i bought k1 Plus i cant see tdt channels

      Thanks

  15. @Kadir
    Have you selected Colombia and Blind scan? If so, maybe the firmware has some issues.
    When it’s scanning make sure it’s using the right frequencies. If not, try to select another country.

  16. I have the same problem. Try every scan. Manual . Auto cable in t2 cable in s2. No channels found. No free air ziggo channels.nothing

  17. Hello
    I got the box and managed to set all my satellite channels, but for some reason a cannot see subtitles..
    I see all available subtitles when i press the “subtitle” button but when i choose one of the available subtitles nothing happens.
    On the other hand when i press the “Audio” button and choose the one of the available audios the audio languish changes after few seconds.
    Pleas advice how can i configure the subtitles to work.
    Than

  18. My K1 DVB S2 receiver Today, I think I am having issues with DTV app, it seems doesn’t detect the Tuner Adapter.
    The DTV opens but when I press on configuration it will blink the screen for a while and then comes back to the same screen.

    kindly someone guide me is there any configurations or another app needed.

  19. Hi, how can you add cccam server subscription to this box, im in the uk channel list brings up fta channels aswel as paid channels. Dont know how to add subscription to the k1 plus box

  20. @jim
    Pressing 111111 in sat configuration menu brings up smartmedia and BISS menus.
    and file name : CCCam.cfg to import cccam server
    and cccam info :
    C: host port username password yes

  21. hi,
    I have k1 S805 dvb-t2 used in aerial with tuner demo SI2168 ….. please the dtv app Does not support the French TV system H264 and EAC3 dolby +

    – Le son est décallé de l’image, parfois beaucoup

    – Le son disparait totalement… ou crachote

    – L’image et le son disparaissent, message ” No signal” et le barre graph indique Zéro en niveau et en qualité de signal.

    – Je change de chaine puis revient sur l’origine… tout refonctionne et le signal est à 100% et qualité à 85%..

    Voila les symptomes de ma réception TV directe via le tuner/démodulateur Si2168 de mon “set top box” AMlogic K1 S805 DVB-T2 application DTV V.140301A

    Je cherche une solution pour améliorer l’application DTV pour la Télévision TNT HD en H264 et l’Audio en Dolby plus EAC3 qui ne semble pas pris en compte par cet appareil.

    Seul le son en MPEG est correctement traité.

    Sound is shifted to video picture , sometimes very much

    – The sound disappears completely or crackles …

    – The picture and sound disappear message ” No signal ” and the graph bar indicates zero in level and signal quality .

    – Changes channel and returns to the origin … everything works again and the signal is 100% quality and 85% ..

    These are the symptoms of my Direct TV reception via the tuner / demodulator Si2168 my ” set top box ” Amlogic K1 S805 DVB -T2 DTV application V.140301A

    I am looking for a solution to improve the DTV application for the HD TV in H264 and Dolby Audio plus EAC3 that seems ignored by this unit.

    Only the sound in MPEG is correctly processed .

  22. @jeannets
    The exact model here is K1 PLus T2S2 with Amlogic S905, but it does not matter, as K1 Plus S805 is using the same app.

    You’re not the first person to report this issue. AC3 is not supported by the box (no Dolby license), except inside Kodi. There are some tricks to potentially make it work. @ http://www.cnx-software.com/2016/02/28/review-of-k1-plus-android-tv-box-with-combo-dvb-s2dvb-t2-tuner/#comment-524184

    I recommend you read the thread in the link above, as other French people also reported issues, and maybe found solutions.

  23. All the channels are not scaling correctly for me with the DVB app.
    All the options seem to stretch to fit the image. ’16:9′, ‘4:3’ and ‘Auto’ makes no difference 🙁
    I’m running the K1 Plus @ 720p, 60Hz

    Anyone else with this issue? Also there seems to be a slight Audio/Video sync issue, but I am not sure if it is just the channel’s fault or not.

  24. I am currently using a Vigica C90S which is Android based and uses the standard DVB TV app. I’m intending to get a KII Pro unit like this one

    http://www.aliexpress.com/store/product/ACEMAX-New-KII-PRO-DVB-S2-T2-Combo-TV-Box-CCCAM-Amlogic-S905-Quad-Core-Hybrid/321932_32702394214.html

    But I’d like to have 1000Mb LAN which is not yet available as far as I can see…

    Anyhow as far as the built in TV app goes, is there any alternative? I find the channel editor very cumbersome to use.

  25. @Leon
    Hello,

    You said ” Also there seems to be a slight Audio/Video sync issue, but I am not sure if it is just the channel’s fault or not”

    I know tis problem, it is the Audio décoding not all codecs… The Audio system haven’t EAC3 … “Dolby Digital Plus”

    the sound is chopped , sliced… and desynchronize to the pictures… may be switch off the chanel .

    I’ve this problem to the French TNT TV HD since April 2016

  26. Hi there,
    My partner brought a K1 PLUS DVB-T2 DVB-S2 Amlogic S905 Quad Core 64Bit TV Box Android 5.1.1 1G 8G from you guys. I’m in new zealand and need to know code to set it up with my sky dish that was used to watch sky tv from. Do you know the settings or able to point me into the right direction.
    Your help with these setting would be greatly appreciated, I live in Napier, Hawkes bay, New Zealand. Cheers

  27. Bonjour,

    Pour ceux qui sont en france, comment avez-vous fait pour regler le satellite. Sur mon VU+ je trouve 1280 chaine mais sur le K2 Hybrid j’en trouve 300.
    Pouvez-vous aussi m’expliquer comment injecter son cccam car j’ai mis le cfg sur une clé usb mais dans le menu il me dit qu’il ne reconnait pas le fichier?
    Merci

  28. Hi,

    Le fichier est: cccam.cfg il peut très bien etre à placer dans des menus cachés, je ne connais pas le VU+
    le format est: C:| AdresseURL| Port| NomServeur|mot de passe
    ex: C: jacky.noips.me 27402 ashley278952369874128
    en cas d’entrée manuelle il ne faut pas mettre le C: devant
    Si tu ne trouve que 300chaines, c’est sans doute que tu n’a que les chaines FTA (non crypté) tu dois sélectionner ça avant de lancer ta recherche.
    Je crois que ton VU+ est sous Linux, donc sensible aux majuscules/minuscules…
    Es-tu uniquement IPTV ou également avec tuner TV DVB-T2 ou DVB-S2..??
    Est-ce que ton Audio est correct..?
    Eventuellement j’ai plein d’autre questions..

  29. Bonjour,
    merci pour la réponse
    J’ai reussi à injecter les cccam manuellement a partir du menu caché.
    Le seul problème reste les chaine satellite DVD S2 sur lesquels je ne reçoit que les chaines italienne de hotbird même si je lance le scan sur astra.
    Donc il pourrait s’agir d’un réglage a faire au niveau du disec.
    Je n’utilise pas d’iptv.
    Concernant la partie audio, sur les chaines HD que j’ai testé, je n’ai pas eu de problème audio.

  30. @rzae
    OK, merci du retour.

    Les Pb audio son sur la DVB-T2 en réception aérienne, due au nouveau procédé de diffusion.. ça fait du son Saccadé ou avec un retard très important par rapport à l’image…surtout sur les Android, je crois qu’en Linux on peu installer quelque chose open source… Bref..voilà.

    A mon avis tu as un probleme de bon alignement avec le satellite…Il faut aligner avec un appareil numérique comme le SF-500 par ex. les cam’s sont fait pour Astra.. je ne sais pas ce que ça donne sur HB
    En ASTRA, j’ai trouvé de nombreuses erreurs ou absence de transpondeurs, alors forcément, il manque des chaines.. j’ai regardé http://fr.kingofsat.fr/tp.php?tp=928 et comparé ou rajouté chaque transpondeur puis scanné… et j’ai ainsi trouvé beaucoup de chaine de notre pays qui n’étaient pas là avant..
    Voilà, j’espère que ça t’aidera.

  31. Bonjour,

    Alors j’ai pu regler mon disec et je reçois bien toute les chaines.
    Concernant le son, pour l’instannt je n’ai pas eu de problème avec le K2 pro.
    Toute mes chaines fonctionne bien et même les chaines UHD.

  32. @rzae
    OK,

    je pense que ça s’arrange pour toi.

    Le problem du son n’existe que sur la réception TNT Hertzienne Donc DVB-T2.
    Le tient, c’est quel modèle exactement..? est-il sous Linux ou Android..?? est-il DVB-S2 et T2..?
    Je cherche la BOX qui fait tout.. et que je puisse parametrer à mon gout… J’en ai trouvé quelques unes, mais elles ont toutes ce défaut en Audio qui oblige à avoir une autre source et donc encore une télécommande de plus..
    Le probleme, c’est qu’il faut acheter une licence pour le Dolby… et les constructeurs ne veulent pas faire ces frais, uniquement pour la France; qui est un petit marché… CQFD.

    1. J’ai le k2 pro hybrid. C’est exactement comme le k1 du site mais avec 2goût de.mémoire et 16go de stockage!
      Donc boîtier sous Android 5.1.1!
      Je n’ais pas tester le dvb t2 mais que le s2.
      Si tu cherche un boîtier Android , il est pasur mal! Mais si tu cherche un boîtier Linux pour le dvb s2 le meilleur reste les vu+ ou dreambox!

  33. J’ai le k2 pro hybrid. C’est exactement comme le k1 du site mais avec 2goût de.mémoire et 16go de stockage!
    Donc boîtier sous Android 5.1.1!
    Je n’ais pas tester le dvb t2 mais que le s2.
    Si tu cherche un boîtier Android , il est pasur mal! Mais si tu cherche un boîtier Linux pour le dvb s2 le meilleur reste les vu+ ou dreambox!

  34. @Rzae
    OK, merci des infos.

    Serais-tu en mesure de faire un essaie de ta BOX K2 en DVB-T2, antenne Hertzienne, pour voir et entendre L’audio si le décodage est fluide, saccadé ou non… et si le son est décalé de l’image (je veux dire beaucoup décallé..)…??

    Si tu pouvais… Merci.

  35. Alors j’ai pu tester le dvb t2 et au niveau image tout est fluide. Par contre il parfois il y a un petit décalage (minime) , pas de saccade!
    Mon boitier est relier en HDMI sur mon ampli, et j’ai remarqué que quand je met la sortie audio en pcm, je n’ai pas de décalage de son!

  36. @Rzae
    OK, merci, c’est sympa d’avoir fait l’essai… mais je parlais du décodage Audio, la fluidité Audio.. des saccades dans le son… c’est l’audio qui est le soucis là dedans.

  37. Bonjour
    Et merci pour toutes vos explications. Pourriez-vous me fournir le dernier firmware du kii pro t2 s2 s’ils vous plaît. Merci

  38. Hi,k2 pro problems with satellite receiver of the weak signals do not work. Other transponder signal bisects.

  39. Hello,
    i need an alternative app for watching dvb-s, because i have some sound problems with the dtv app. the sound is not synchronic.
    Are they other apps like dtv?
    Or a solution for this problem.

    Thx

  40. K2pro not working in USALS motor setup. not less introduction the local longitude, local latitude. so i not understend

    please, someone can help me on this topic

  41. The remote control that came with my K1 Plus Android DTV DVB-S2, DVB-T2 Receiver from Gearbest doesn’t work. Can I generate the coloured buttons on the remote using a wireless keyboard.

  42. how i find the satellite list file?

    i have a satellite.xml file and i want to put it there.

    lot’s of satellites are missing in the list like amos 4.w and nilesat 7.0w.

    thx

  43. Hello all,
    Is it possible to start DVB-T2 tuner by default after pressing DTV button on remote control? I do not use DVB-S2 tuner so choose DVB-S2 or DVB-T2 question is not needed for me. Let me know if there is e.g. configuration file to disable DVB-S2 option.
    Thanx

  44. olá bom dia, comprei um k1 mas não sei como entrar no menu de protocolo NEWCAMD, dizem ter um menu secreto, será que alguém pode me ajudar, obrigado.

  45. @José Lima
    olá josé, sou brasileiro comprei um k1 modelo anterior , mas até agora não consegui pegar os canais via satélite pagos, só pega os não pagos tipo record e novo tempo, parece ter um menu secreto para protocolo newcand que é pago, mas ainda não consegui. do resto ele é um androide normal com youtube , netflix, jogos etc. no meu caso quero pegar canais pagos tipo claro sky. meio complicado tive que adicionar o satélite da claro que não tinha, baixei todos os canais mas não consegui liberar ainda, o k1 plus pega tv digital terrestre o meu não pega. conclusão meio complicado configuração , mas o aparelho é muito bom, só temos que aprender mexer com ele. esta começando aos poucos no Brasil.

  46. channel list, whether it is a program, for processing channel lists, for example, the E2?
    tuner cool but the channel lists poorly 🙁

  47. O modelo K1 não possui decodificador secreta ou menu de satélite.
    Ou a referência não está completa.
    Para ter as chaves para decodificação Newcam ou cccam, você precisa de uma assinatura com um provedor para a sua internet conectada por KI para caixas que recebem o satélite codificada.

  48. Hello,

    How to do the favoris on KII pro..??

    I know tu use the touch FAV…. but i don’t understand to make it.

    Tk.

  49. Hello,

    Does the “DTV” app have a cast logo in the corner (just like when watching YouTube videos on phone).

    I have a google chromecast dongle in the bedroom tv, so I want to know if I can just cast satellite from DTV of this andriod box to my other tv using gcast, without having to move the box.

    Thanks

  50. Is there anyway to get over the air broadcasts in the United States. I bought a F to pal converter to hook the cable line in but I can’t find a frequency setting that picks up my channels.

  51. Florin use latest custom firmware of Malay for working with USALS. For Ro use (Lon E 027.** and Lat N 045.**) with 0 in front. May be original firmware have a wrong table of satellites.

  52. Hi, I’m in Canada and I don’t see that country or US in the area settings for dvb-t2. How should I run the scan? I’ve tried a few other countries with no luck.

  53. Hello is there a way to get rid of that “digicam” icon when watching recorded shows? And is there any button in remote to open the recorded folder right away without going menu selection?

  54. How do we play the radio stations captured under the dvbt standard in this box? I don’t have sat but also under sat how we play radio stations?

  55. I have a combo K1 S2 T2. For T2, I wonder if I can access the HbbTV/Interactive functions using the red button? I can do that with an android TV but can this be emulated with this box?

  56. hello, does anyone have any problems with cccam? I have smart data * and biss * assigned by *, cccam is connected but does not decrypt the signal. I have flashed various firmware but the problem persists. Someone has a solution?

    1. did you find any solution? I have the same problem. Cccam is connected but all channels show ‘scrambled’ message.

  57. Даниеле :
    Здравейте, някой има ли някакви проблеми с cccam? Имам умни данни * и biss * зададени от *, cccam е свързан, но не дешифрира сигнала. Имам flash на различни фърмуер, но проблемът продължава. Някой има ли решение?

    Ihave the same problem.

  58. I also have the problem … no solution. The supplier has been bani and his server is no longer responding, it is never connected … the Supplier has locked the door and fled with the money ..

  59. @jas we don’t know how to unscramble the channels… without money

    @Patrick because you aren’t in Nederland… or not the good channels/satellite.

    @joe you can record only channels from antenna (not streaming) to read your record / USB disk or key, you can use VLC for Android installed on your KII or Kodi or média player or in DTV —> preferences—>Record List–>OK

  60. I really need help .. I just purchased a MECOOL KI PRO TV Box Android 7.1 DVB-S2&DVBT &DVB-C BT4.1 5G WiFi 4K HDR HD W9C2 …Im trying to set up my antenna to watch local tv I live in michigan 48706.. and having problems could you help in any way

  61. @chris
    Since you live in the US, the DVB-T2 tuner will not work, as your need an ATSC tuner to watch local TV.
    The only way you’ll be able to watch live TV using the tuner with that box is through the DVB-S2 tuner and a satellite dish.

  62. @chris
    Ah OK, so if you have a satellite dish then it should be OK. You just need to select the satellite you want to use in the list, or if not present, input the settings for the one you want to use.

  63. Please my super unique setting is still not coming. Please help me thanks.this is my number 0553235540

  64. I have a kii pro and i noticed that in DTV preference->General settings-> there is no Area Setting.After scanning for channels it returns to no channel found.Since there is no area setting to set it to Nigeria. What will do to enable me get channels?

  65. hi,

    (Model : UHD 4K DVB-T2 / DVBS2 Satellite Receivers K1 Plus IP TV Box Android 5.1)
    few questions for above mentioned box. as you know there is not complete specification on alibaba website regarding above satellite android box.
    1: does it have diseqc rotor control ( USALS)..?
    2: Is it compatible with cccam( card sharing)…?
    thanks in advance…

  66. @bhat
    1. They have a configuration menu for DISCeq
    2. Based on https://www.cnx-software.com/2017/03/22/mecool-kiii-pro-hybrid-stb-review-part-2-android-firmware-tv-center-and-dvb-t2-dvb-s2-app/

    Advanced users will be able to access CCcam, BISS, and PowerVU settings by pressing the Menu key, selecting Installation and DVB S/S2, and from there enter 111111 on the remote (6 times character 1) to access Smart Data Manager…

    Different model, but the app should be the same.

  67. Thanks for the earlier answer regarding (Model : UHD 4K DVB-T2 / DVBS2 Satellite Receivers K1 Plus IP TV Box Android 5.1) Diseqc rotor control & card sharing , cccam, power VU , biss key ect etc. Kindly, i want your guidance , which brand & model is the best 4k android DVB-S-2 tv box. the box should also have below mentioned features .
    1. DVB & DVB-S-2
    2. Diseqc rotor control
    3. card sharing ( cccam, biss key & power VU, )
    4. IPTV
    5. Wifi

    1. Help me
      I would like to know after the purchase of the KI decoder pro there is a subscription fee to pay? because for my part, I was not made to understand that. even DTV channels, you want me to pay the subscription fees before having access to the channels.

  68. Hi…until now, im still cant setting my kiplus…after auto search using DVT3, no program is appear…pls help me

  69. Aidez moi à comprendre

    j’aimerais savoir après l’achat du decodeur KI pro y a t’il des frais d’abonnement à payer ? car pour ma part, on m’a pas fait comprendre cela . même les chaînes en DTV, on veut me faire payer les frais d’abonnement avant d’avoir accès aux chaînes.

  70. I have a HD Digital DVB- T2 & S2 Combo.
    In the set up it ask for the Language (English) and for the country. I live in Canada and Canada and the USA are not listed
    How do I get Canada to be listed

    1. You don’t need to care. Canada does not support DVB-T2, only ATSC. That means you can only use the satellite dish (DVB-S2) to receive free-to-air TV channels.

Leave a Reply

Your email address will not be published. Required fields are marked *

Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...
Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...