Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

October 22, 2020October 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Lanmodo Vast Pro dashcam helps you drive more safely at night (Crowdfunding)

Lamodo Vast Pro Dashcam Night Vision System

There are plenty of dashcams on the market to record accidents or other events that may happen while driving or while your car is parked. Lanmodo Vast Pro is another of those systems but features a wider screen and a night mode that helps drivers see clearer and further at night or other adverse conditions (rain, fog, snow, etc…), leaving more time for the driver to take corrective action and prevent an accident. The system is equipped with a 1080p HDR camera using a Sony CMOS sensor, as well as an optional Full HD rear camera with a 170-degree field-of-view, and up to 128GB of storage good for around 28 hours of continuous recording. Lanmodo Vast Pro key features and specifications: SoC – Unknown Storage – MicroSD card up to 128 GB (28 hours of continuous of front came, or 14 hours with rear camera as well) Display – 8-inch […]

October 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

One Netbook A1 7-inch laptop features Ethernet and COM port for IT Pros

We’ve seen many Intel-powered mini-laptops with 6 to 9-inch display in the last coupled of years mainly from GPD and One Netbook, but also CHUWI. Most models are tinier versions of ultrabooks with wireless-only connectivity, but last year GPD MicroPC 6-inch mini-laptop added Ethernet and RS-232 COM port for IT professionals such as sysadmins. But there’s now another option with One Netbook A1 equipped with a 7-inch display, powered by an Intel Core m3-8100Y Amber Lake processor, and also featuring Ethernet and COM ports, plus the usual USB and HDMI ports. One Netbook A1 specifications: SoC – Intel Core m3-8100Y dual-core/quad-thread Amber Lake processor @ 1.1 / 3.4 (Turbo) GHz with Intel UHD Graphics 615; 5W TDP System Memory – 8GB RAM Storage – 256GB or 512GB M.2 SSD; microSD card slot Display – 7-inch touchscreen IPS LCD with 1920 x 1200 resolution IPS LCD; support for stylus with 4096 […]

October 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

How to develop Gstreamer-based video conferencing apps for RDK & Linux set-top boxes

CNXSoft: This is a guest post by Promwad that explains the basic steps to develop a video conferencing app with Gstreamer on TV boxes running Linux. The COVID-19 pandemic has become a catalyst for new online services. For example, Zoom became so successful that it overtook IBM in terms of capitalization this month. The software engineers at Promwad were inspired by this success and decided to go even further: what about implementing video conferencing on Smart TV and STBs? Then the users of such an application will have an opportunity to communicate not only at work but also to enjoy remote meetings with friends, cheer for a soccer team, watch a movie together, or do sports with a coach. For some reason, most digital TV operators do not have such a service, although, from an engineering point of view, all these features can be implemented on set-top boxes based on […]

October 21, 2020October 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Forlinx OK1028A-C networking SBC supports LVDS displays, 4G/5G modules

Forlinx released two networking SBC’s with 10Gbps Ethernet powered by NXP LS1043A and LS1046A processor nearly exactly one year ago. Like many other networking SBCs they do not come with video output so configuration is done via a computer or laptop either through a UART interface or a web interface. But in some cases, such boards may be integrated into machines that require a display for human-machine interaction. That’s why Forlinx has now released a new networking board – OK1028A-C – powered by NXP QorIQ Layerscape LS1028A dual-core Cortex-A72 processor that natively supports video output up to 4K UHD resolution via an eDP/DisplayPort interface which the company used to provide an LVDS header. The board also offers 5 Gigabit Ethernet ports, as well as optional WiFi, Bluetooth, and 4G or 5G cellular connectivity via M.2 and mPCIe modules. Forlinx OK1028A-C specifications: FET1028A-C system-on-module SoC – NXP LS1028A dual-core Cortex-A72 processor […]

October 21, 2020February 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Qualcomm IPQ6000 embedded SBC offers dual Gigabit Ethernet and WiFi 6 connectivity

At the beginning of the month, we covered Mango-DVK development kit based on a Qualcomm IPQ6000/IP6010 powered system-on-module enabling 2.5GbE and WiFi 6 connectivity. Wallys Communications contacted us earlier this week, about one of their new “802.11ax low-end product”, namely DR6000 SBC that happens to be based on Qualcomm IPQ6000 “CP03” reference design, and offers both WiFi 6 and dual Gigabit Ethernet connectivity in a round-shaped board. DR6000 / CP03 specifications: SoC – Qualcomm Atheros IPQ6000 quad-core Arm Cortex-A53 processor @ 1.2GHz processor System Memory – 512MB DDR3L Storage – 128MB Nand Flash, 16MB NOR flash Networking Wired – 2x Gigabit Ethernet RJ45 ports Wireless 2.4GHz 2×2 MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, up 573 Mbps, up to 20dBm per chain 5GHz 2×2 MU-MIMO OFDMA 802.11a/n/ac/ax WiFi 6, up to 1201 Mbps, up to 20dBm per chain 2x U.FL Connectors, diplexer allows dual band concurrent operation USB – 1x micro USB […]

October 20, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arm Ethos-U65 microNPU enables low-power AI inference on Cortex-A & Neoverse SoC’s

Ethos-U65 - Cortex-M vs Cortex A/Neoverse Diagrams

Arm introduced their very first microNPU (Micro Neural Processing Unit) for microcontrollers at the beginning of the year with Arm Ethos-U55 designed for Cortex-M microcontrollers such as Cortex-M55, and delivering 64 to 512 GOPS of AI inference performance or up to a 480x increase in ML performance over Cortex-M CPU inference. The company has now unveiled an update with Arm Ethos-U65 microNPU that maintains the efficiency of Ethos-U55 but enables neural network acceleration in higher performance embedded devices powered by Arm Cortex-A and Arm Neoverse SoCs. Arm Ethos-U65 delivers up to 1 TOPS, and as seen in the diagram enables features that can not be done with Ethos-U55 including object classification and real-time classification. Compared to Ethos-N78 NPU, the new microNPU offers less AI performance, but a significantly higher efficiency although AFAIK no quantified by Arm. The company says the development workflow remains the same with the use of the […]

October 20, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SwarmDrive is an ESP32 motor driver board for brushless motors (Crowdfunding)

Netherlands based NickStick BV has developed a motor driver board powered by an ESP32 dual-core WiFI and Bluetooth module and capable of controlling brushless DC motors. The SwarmDrive board targets users who want to start experimenting with motor control, and learn about commutation strategies, PID for balance plateau or balance robots, cartesian gantries and spatial navigation, drive by wire and wireless, swarm intelligence experiments, etc. SwarmDrive specifications: Wireless module – Espressif Systems ESP32-WROOM-32D module with ESP32 dual-core processor @ 240 MHz, 4 Mbit flash Connectivity 2.4 GHz 802.11 b/g/n WiFi up to 150 Mbps Bluetooth v 4.2 BR/EDR and BLE Motor Control L6234 triple half-bridge motor driver, 5 A peak current 3-pin terminal block for motor output 3x enable pins are broken out to a bridging connector Programming and debugging – Micro USB serial port via USB to UART bridge, Misc – Boot and reset push-buttons Power Supply Supply Voltage – […]

October 20, 2020October 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

ODROID-HC4 low-cost dual NAS comes with 4GB RAM, supports 2.5-inch and 3.5-inch SATA drives

[Edit: Hardkernel has now updated their documentation to clarify the NAS uses ASM1061 PCIe to SATA controller instead of JMB582] It’s hard to find low-cost NAS platforms often because of the mechanism to insert drives and the enclosure add to the cost. An alternative is to use boards like Hardkernel ODROID-HC1 for 2.5-inch drives or ODROID-HC2 for 2.5- and 3.5-inch drives, but each board supports only one drive. The designs are stackable, but you’d need one Linux board per drive, so it’s not ideal. The Korean company has now launched a new model with ODROID-HC4 powered by an Amlogic S905X3 processor and shipping with a case supporting two 2.5-inch or 3.5-inch SATA drives that will start selling later this month for just $65 and up. ODROID-HC4 specifications: SoC – Amlogic S905X3 quad-core Cortex-A55 processor @ 1.8 GHz with Mali-G31 MP2 GPU System Memory – 4GB DDR4 Storage 128 Mbit SPI […]