Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

November 10, 2015January 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Intel Quark D1000 Customer Reference Board and Intel System Studio for Microcontrollers

Intel unveiled Intel Quark D1000, D2000 and SE micro-controllers last week, with Intel Quark D1000 available now for $2.5 to $4 depending in quantities, and to my knowledge the first Intel MCU that can be considered ultra low power. I could not see a development board at the time, but Intel does have an Intel Quark D1000 Customer Reference Board with a familiar Arduino form factor. Intel Quark D1000 board specifications: MCU – Intel Quark D1000 32-bit CISC micro-controller @ 32 MHz Storage – 4MB SPI flash (Microchip ) Connectivity – Bluetooth LE radio, Wi-Fi (Inventek Systems Serial to Wifi module) Sensor – 3-axis accelerometer Expansion – Arduino compatible headers with GPIOs, I2C, SPI, UART, analog inputs, and 5V, 3.3V and GND. Debugging – mini USB port for programming and debugging; JTAG pins Power – 5V via mini USB port, or LiPo / Li-ion battery Dimensions – N/A Information about […]

November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Ugoos AM1 TV Box and Some Amlogic S905 Benchmarks

A few TV boxes based on Amlogic S905 processor are currently up for pre-order such as MXQ Pro and Beelink MINI MX mini PCs with 1GB RAM, 8GB storage, and which are due to ship later this month. Ugoos is also working on their own AM1 TV box and AM2 TV stick based on Amlogic S905 processor, with some better specs, and today released a few more details about Ugoos AM1. Ugoos AM1 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 (Samsung); 4GB version likely later on Storage – 16GB eMMC flash + SD card slot Video Output – HDMI 2.0 Audio – HDMI, optical S/PDIF Connectivity – 10/100/1000M Ethernet (Realtek RTL8211F), 802.11 b/g/n/ac Wi-Fi and Bluetooth 4.0 (AP6335 module) USB – 3x USB 2.0 host ports Misc – IR receiver Power Supply – […]

November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Orange Pi Plus 2 Allwinner H3 Board Includes 2GB Memory

Shenzhen Xunlong has made yet another Allwinner H3 board. It’s called Orange Pi Plus 2 with basically the same specifications as Orange Pi Plus, but the layout has been modified with a slightly wider board, and the RAM upgraded from 1GB to 2GB. Orange Pi Plus 2 specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with ARM Mali-400MP2 GPU up to 600 MHz System Memory – 2GB DDR3 Storage – 8GB eMMC, micro SD card slot, SATA interface (via a USB to SATA chip), Video Output – HDMI, AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100/1000M Ethernet, 802.11 b/g/n Wi-Fi (Realtek RTL8189ETV) USB – 4x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin Raspberry Pi Model A+/B+ (mostly) compatible header Debugging – 3-pin UART header for serial console Misc – IR receiver; Power, […]

November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Linaro Releases the First (Alpha) Version of the 96Boards Reference Software Platform

Linaro’s 96Boards initiative was launched at the beginning of the year with Hikey board, and beside the hardware specifications, 96Boards also has some software requirements that include support for “bootloader (open source), accelerated graphics support (binary or open source), a Linux kernel buildable from source code based from mainline, or the latest Google-supported Android kernel version, or the last two LTS kernels, and one of more of the following operating systems: Android, Debian/Ubuntu, Fedora/Red Hat, or an OpenEmbedded/Yocto build of a Linux distribution”. In order to achieve this goal, Linaro introduced the Reference Software Platform for 96Boards, and they’ve now pushed the first Alpha release for Hikey and DragonBoard 410c boards. The release includes a bootloader, the Linux kernel, Debian and AOSP with firmware, source code, and documentation. Some highlights of the Reference Software Platform 15.10 Alpha release include: CE Debian RPB (Reference Platform Build) Debian 8.2 “Jessie” Linux 4.3 […]

November 9, 2015November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

SolidRun ClearFog Pro and Base Router Boards Feature Marvell ARMADA 380/388 Processor

Last month, I wrote about Turris Omnia an upcoming open source hardware router board with 6 Gigbit Ethernet ports and an SFP cage powered by Marvell ARMADA 385 processor. SolidRun has now unveiled ClearFog Pro router board with similar features, but opting instead for either Marvell ARMADA 380 or 388 processor. The company will also soon launch or lower-end version called ClearFog Base with the less ports, but with the same system-on-module as ClearFog Pro: Processor – Marvell ARMADA 380 (88F6810) single core or 388 (88F6828) dual core ARMv7 processor (Cortex A9 class) @ up to 1.6 GHz with 1MB L2 cache, NEON and FPU System Memory – 256MB to 1GB 16-bit DDR3L (ARMADA 380) or 32-bit DDR3L (ARMADA 388) Storage Pro version – M.2 slot, 1x micro SD slot, 2x mSATA/mPCIE Base version – M.2 slot, 1x micro SD slot, 1x mSATA/mPCIE Connectivity Pro version – 6x switched Gigabit […]

November 8, 2015November 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

Konke Mini K and Mini Pro Wifi Smart Sockets are Based on ESP8266 SoC

ESP8266 WiFi modules are very popular in the maker community, but so far I have not seen it in any devices myself, until I saw a tweet from @EspressifSystem about a Mini K smart socket. A search on Aliexpress lead me to two devices made by Konke, who also made Kankun KK-SP3 WiFi socket, with Mini K and Mini Pro smart sockets. Both models has basically the same features, except Mini-Pro adds infrared support: Connectivity – 802.11 b/g/n Rated Voltage – AC 100-240V 50/60Hz Rated Power – 2200 Watts Rated Current – 10A Charging Protection: Yes Misc – Power button, Infrared (Mini Pro model only) Plug – China / AU plugs Dimensions – 5.1 diameter x 2.7 cm (V0 grade PC material) Weight – 70 grams Both devices support on/off timers, cyclical delays and charge protection (turns off when devices are charged) with the Android or iOS app. I understand […]

November 7, 2015November 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Nvidia Jetson TK1 Development Board is Now Selling for $99 (Promo)

Sorry that I don’t have an Nvidia Jetson TK1 board to give away…, but if you were interesting in getting one the best ARM Linux boards available today, and found the $192 price tag a little too high, Make announced a ~50% discount offer to get the board for $99 on Nvidia store using MAKEJTK1 coupon. Here’s a reminder of the board’s specifications: SoC – Nvidia Tegra K1 SoC with 4-Plus-1 quad-core ARM Cortex A15 CPU, and Kepler GPU with 192 CUDA cores (Model T124) System Memory – 2 GB x16 memory with 64 bit width Storage – 16 GB 4.51 eMMC memory, SATA data + power ports, full size SD/MMC slot, and 4MB SPI boot flash. Video Output – HDMI port Audio – ALC5639 Realtek Audio codec with Mic in and Line out Connectivity – RTL8111GS Realtek GigE LAN USB – 1x USB 2.0 OTG port, micro AB, 1x […]