Linux Category - Page 396 of 555 - CNX Software

February 19, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Olimex Announces Availability of TI AM3352 and Rockchip RK3188 SoM and Evaluation Boards

Olimex showcased prototypes for both Texas Instruments Sitara AM3352 and Rockchip RK3188 system-on-modules and evaluation boards in May 2014. However, development and production took a bit longer than expected, and the company has just announced availability of the platforms now. Rockchip RK3188 CPU Modules and Kit RK3188-SOM-EVB kit specifications: RK3188-SOM-4GB System-on-Module with the following key features: SoC – Rockchip RK3188 quad core Cortex A9 processor @ 1.6GHz with Mali-400MP4 GPU System Memory – 1GB DDR3 Storage – 4GB Flash + micro SD slot Debugging – 4-pin UART connector Misc – Reset and Recovery buttons, 3x status LEDs Dimensions – 55.88 x 81.28 mm Video Output – HDMI output + LCD output Connectivity – 10/100Mbps Ethernet USB – 4x USB Hosts, 1x micro USB OTG Expansion Connectors LCD connector for LCD-OLinuXino-XX LCDs 2x UEXT connectors 2x 40 pin GPIO connectors Misc – RTC with backup battery Power Supply – 6-16 V via […]

February 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Voltera V-One is a Low Cost PCB Printer and Solder Paste Dispenser (Crowdfunding)

The traditional hardware development cycle involve sending PCB Gerber files to a manufacturer, wait a few days (or weeks), get the boards back, find and fix bugs, send a new revision of the gerber files to the manufacturer and so on. This wastes a lot of time, so PCB printers capable of handline single and dual layer PCBs have started to see the light of the day, for example with BotFactory Squink. The latter can also do pick and place, but costs over $3,500. Luckily if you’d like something cheaper, Voltera V-One will do many of the same tasks, for but for only $1,500. Voltera V-One specifications: Minimum Trace Width – 8mil (~0.2mm) Minimum Passive Size – 0603 (0402 for solder paste) Minimum Pin-to-Pin Pitch – 0.8mm (0.5mm for solder paste) Resistance – >12 mOhm/sq @ 70um height Max Heated Bed Temperature – 250C Heated Bed Ramp Rate – ~2C/s […]

February 16, 2015September 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

HiSilicon D02 Server Board Supports up to 64 ARM Cortex A57 Cores

HiSilicon has showcased their latest server SoC and board at Linaro Connect Hong Kong 2015, with up to two processors with 32 Cortex A57 cores @ 2.1GHz, 8 DIMM DDR3 slots (up to 128 GB RAM), 12 SATA ports, 4 PCIe slots, 10GbE / GbE ports. D02 board specifications: SoC – Hisilicon PhosphorV660 Hip05 with 16 to 32 ARM Cortex-A57 cores @ up to 2.1GHz and 1MB L2 cache/cluster, 32MB L3 cache System Memory – 2x Memory channel 4x DDR3 DIMM(4x DIMM per processor) Storage 12x SAS 3.0 ports @ 12 Gbps (8 for the first processor, 4 for the second). SAS port are compatible with SATA drives. You may want to read SAS vs SATA post for more details about SAS. 2x SPI Flash 158Mb BIOS/UEFI 1Gb NorFlash Connectivity – 2×10/100/1000Mbit/s Gigabit Ethernet ports, 2x xGE SFP+ ports (10Gb/s) Expansion – 2x 8x PCI express interfaces per processor (4 […]

February 15, 2015February 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

EZCap 280 Records Videos up to 1080p via HDMI or Component

The recent release of Mstar 9810 based media players with video recording capabilities via HDMI input such as Zidoo X9 and Egreat A9, as made me wonder about standalone 1080p HDMI recording boxes, so I’ve had a look, and several products are available, but EZCap 280 seems one of the most affordable and popular, and beside HDMI input, it can also take component input. Some of EZCap 280 specifications: Video / Audio Input HDMI 1.4 Component video connector with YPbPr and stereo audio; 3.5mm jacks for LINE IN and Microphone Video / Audio Output – HDMI, and LINE OUT Recording Format – MPEG4 AVI with AAC stereo audio. Up to 18 Mbps @ 1080p30. Input Standards Supported – 720×480@60Hz, 720×576@50hz, 720p50/60, 1080i50/60, 1080p24/25/30 USB – 1x USB 2.0 Host port for USB mass storage connection. Misc – LED, REC button Dimensions – 11 cm x 7.4 cm x 2.5 cm […]

February 13, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Advantech UBC-220 Freescale i.MX6 RISC Compact Box Is Made for Wall-Mounting

If somehow you need a fanless ARM Linux / Android computer with lots of mounting holes, Advantech UBC-220 might be what you are looking for. The company’s “Freescale i.MX6 RISC Compact Box” features a Freescale i.M6 Solo or DualLite processor with up to 1GB RAM, 4GB eMMC, Gigabit Ethernet, HDMI and LVDS, a COM port, and more. Product specifications: SoC – Freescale i.MX6 Solo/DualLite up to 1GHz with Vivante GPU System Memory – 512MB to 1GB DDR3 @ 1066 MHz Storage – 4GB eMMC for OS, 4MB SPI flash for Advantech bootloader, 1x SD card slot Video Output / Display – 1x HDMI, 1x 18/24-bit LVDS Connectivity – Gigabit Ethernet (limited to 470Mbps due to i.MX6 internal limitation). Optional 3G/Wi-Fi via mini-PCIe slots. External antenna connector included. USB – 1x USB 2.0 type A, 1x micro USB 2.0 OTG Serial – 1x 4-wire UART Expansion 1x full size mini PCIe […]

February 13, 2015August 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 47 Comments

How To Install Ubuntu 15.04 on MeLE PCG03 Intel Mini PC

I’ve already spent some time to test MeLE PCG03 Bay Trail-T mini PC in Windows 8.1, including a detailed video and audio review in Kodi 14.1. Since I don’t have anything else to do with Windows on the machine, I’ve decided to install Ubuntu instead, completely wiping out Windows 8.1. Since you pay around $30 for the Windows license, MeLE PCG03 is not the ideal platform computer for this little exercise due to the extra cost, but it should also work with other Intel Atom Z3735F based computer that may not come with a license. At first I planed to go with Ubuntu 14.10 Mate ISO image, and it boots fine, but was curious to try from “scratch” with another ISO, so I went with Ubuntu 15.04 Alpha 2 (64-bit) image. I just went to the first link Google Search provided me and did not pay attention enough, and ended-up […]

February 12, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Raspberry Pi, Banana Pi, and ODROID-C1 Boards Power Consumption

Mikronauts has recently reviewed MIPS Creator CI20, ODROID-C1, and Raspberry Pi 2 Model B. R-PI 2 review is especially interesting since this is the last one, and the reviewer goes to compare all Raspberry Pi models (A, A+, B, B+ and 2 B) with Banana Pi, Banana Pro, MIPS Creator CI20, and ODROID-C1 development boards. The benchmark results are good to know, and expected with ODROID-C1 the fastest of the bunch both in terms of CPU and storage performance, but here I’ll just share the results of his power consumptions testing. Since all platforms are powered by a 5V power supply, I’ve converted the results into watts. Model Max (W) Avg (W) Off (W) A 1.07 0.80 0.15 A+ 0.76 0.48 0.125 B 2.45** 2.12 0.62 B+ 1.20 1.15 0.35 2 B 2.25 1.55 0.325 Banana Pi 2 1.25 0 Banana Pro 2.3 1.62 0 Odroid-C1 2.3 1.62 0.735* * […]

February 10, 2015February 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Ingenic Halley is a $20 Linux based IoT Board with Wi-Fi and Bluetooth 4.1 Connectivity

Ingenic introduced Newton2 platform for wearables a few months ago, and the kit with an AMOLED display, camera board and other accessories should go on sale in March for $80. In the meantime, the company has also been working on a lower cost internet of things (IoT) module and development kit powered by Ingenic M150 with Wi-Fi and Bluetooth 4.1 targeting smart appliances, Wi-Fi speakers, smart toys, industrial control applications, and other smart devices. Halley IoT module specifications: SoC – Ingenic M150 XBurst (MIPS) single-core processor up to 1.0GHz with 128MB LPDDR on-chip, 2D graphics GPU, VPU supporintg 720p30 H.264 video decoding. Storage – 8MP SPI NOR flash (GIGA GD25LQ64) Connectivity – Wi-Fi 802.11 b/g/n and Bluetooth 4.1 via Broadcom 43438 chip. Expansion headers (2mm pitch) 8-bit parallel LCD interface, Audio – MIC, Line-In and headphone, 2x I2S, SD card (MMC interface) USB device 2.0, and USB host 1.1 3x […]