Operating Systems Category - Page 295 of 1029 - CNX Software

September 20, 2020September 20, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Raspberry Pi inspired MaaxBoard Mini SBC features NXP i.MX 8M Mini SoC

Last year, Embest – an Avnet company – introduced MaaXBoard NXP i.MX 8M SBC mostly compatible with Raspberry Pi form factor and running Android 9.0 or Yocto Linux. The company has now launched MaaXBoard Mini with a 14nm NXP i.MX 8M Mini quad-core processor. In some ways, the new board follows more closely Raspberry Pi 3 Model B form factor with four USB 2.0 ports, instead of the two USB 3.0 ports found in the first version of the board, but it does so without HDMI output, leaving MIPI DSI as the only option for display output. MaaxBoard Mini (AES-MC-SBC-IMX8MINI-G) specifications: SoC – NXP i.MX 8M Mini Quad with 4x Arm Cortex-A53 cores @ up to 1.8GHz, Cortex-M4F real-time core @ 400MHz, Vivante GCNanoUltra 3D GPU and GC320 2D graphics, 1080p H.264/H.265 VPU; System Memory – 2GB DDR4 Storage – eMMC socket for up to 64GB flash, MicroSD slot Display […]

September 19, 2020 by Ayo Ayibiowu - No Comments

MYIR launches FZ5 EdgeBoard AI Box for AI on the Edge

Back in July of this year (2020), MYRI technology announced the MYIR’s FZ3 deep learning accelerator card powered by the Xilinx Zynq UltraScale+ ZU3EG Arm FPGA MPSoC and it is capable of delivering up to 1.2TOPS computing power. With only a few months since that launch, MYRI technology is now announcing another two related sets of products – FZ5 EdgeBoard AI Box and the FZ5 Card. The FZ5 EdgeBoard AI Box is an AI-focused computing platform that is based on the FZ5 AI Accelerator card which is an upgrade of the FZ3 card. The FZ5 looks more like a single board computer than an actual computing card. The FZ5 accelerator is powered by the Xilinx Zynq UltraScale+ ZU5EV MPSoC which features a 1.5 GHz quad-core Arm Cortex-A53 64-bit application processor, a 600MHz dual-core real-time Arm Cortex-R5 processor, a Mali400 embedded GPU and is capable of delivering up to 2.4 TFLOPS as compared […]

September 18, 2020September 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

DeskMini X35G Ice Lake Mini PC Coming in October for $400 and up (Crowdfunding)

MINISFORUM DeskMini X35G Ice Lake Mini PC

MINISFORUM is a Hong Kong-based company specialized in mini PC, and we recently covered their Gemini Lake-based MINISFORUM S40 PC Stick, but to differentiate themselves in a field with some many Gemini Lake mini PC, the company is preparing to launch DeskMini X35G mini PC based on a more powerful Intel Core i3-1005G1 “Ice Lake” processor that offers features such as Thunderbold 3 40 Gbps USB-C port and support for Intel Optane Memory. DeskMini X35G specifications: SoC – Intel Core i3-1005G1 dual-core/quad-thread Ice Lake processor @ 1.2GHz / 3.4GHz (Turbo) with 4 MB Intel Smart Cache, Intel UHD graphics @ 300 to 900 MHz; 15W TDP System Memory – 16GB DDR4-3200MHz (soldered) Storage M.2 2280 NVMe SSD (PCIe 3.0 4X) with support for Intel Optane memory 2.5 inch SATA3.0 HDD or SSD Support 1×M.2 2280 SATA SSD Support MicroSD card slot Video Output HDMI 2.0 up to 4Kp60Hz DisplayPort up […]

September 17, 2020September 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

NXP i.MX 8M Plus AI Systems-on-Modules and Devkits Launched by Variscite

NXP i.MX 8M Plus processor was unveiled at the very beginning of the year as the first i.MX processor with AI hardware acceleration provided by a 2.3 TOPS Neural Processing Unit (NPU) embedded in the chip. Apart from the upcoming Wandboard 8MPLUS SBC, we had not seen hardware powered by the new processor, but Variscite has now announced two NXP i.MX 8M Plus systems-on-modules – VAR-SOM-MX8M-PLUS and DART-MX8M-PLUS – and corresponding development kits. VAR-SOM-MX8M-PLUS CPU Module & Development Kit Specifications: SoC – NXP i.MX 8M Plus single, dual or quad-core Cortex-A53 processor clocked at up to 1.6 (Industrial/Extended) or 1.8GHz (Commercial), Cortex-M7 real-time core @ 800 MHz, 1080p H265/H264 encode/decode, AI/ML acceleration up to 2.3 TOPS, GC7000UL 3D GPU, GC520L 2D GPU System Memory – 1 to 4GB LPDDR4 Storage – 8 to 64GB eMMC flash Networking – 802.11 ac/a/b/g/n + BT 4.2/BLE module SO-DIMM Edge Connector Storage I/F – […]

September 16, 2020February 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

DR6018 V2 Embedded WiFi 6 Router Board Adds Support for WiFi 6E and 5G IoT M.2 Cards

DR6018 V2 WiFi 6E & 5G IoT Embedded Board

A few months ago we covered DR6018 (aka CP01) WiFi 6 Embedded SBC powered by Qualcomm IPQ6018 processor and offering six Ethernet ports including five Gigabit interfaces and one 2.5 Gbps Ethernet port. Wallys Communications has now informed CNX Software they had a new version of the board called DR6018 V2 with a more compact form factor, support for PoE, as well as optional WiFi 6E and 5G IoT M.2 modules. DR6018 V2 board specifications: SoC – Qualcomm Atheros IPQ6010 quad-core Arm Cortex-A53 processor @ 1.8 GHz System Memory – 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Storage – 256MB NAND Flash, 32MB NOR flash, SD card slot Networking Wired 3x Gigabit Ethernet ports (one less compared to DR6018) 1x Gigabit Ethernet port with PoE support 1x 2.5Gbps Ethernet port Wireless WiFi 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, max 23dBm per chain 2×2 5GHz MU-MIMO […]

September 16, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

IP69K-Rated Stainless Steel Panel PCs Run Windows 10 or Ubuntu 16.04

There are already several industrial dust and waterproof panel PCs on the market, but with its Intel Apollo Lake powered Titan-AL Series, ADLINK goes a step further with IP69K-rated stainless steel panel PCs that provide resistance against corrosion from all sort of chemicals. Titan-AL series panel PCs can be washed with high-pressure water or steam to meet high-hygiene standards required in special production environments including food, pharmaceutical, and chemical production. ADLINK Titan-AL series panel PC specifications: SoC – Intel Atom x7-E3950 quad-core Apollo Lake processor @ 1.60 GHz / 2.00 GHz (Boost) with Intel HD Graphics 505; 12W TDP System Memory – 4GB DDR3L default (up to 8GB) Storage – 2.5″ SATA drive bay Available Displays Configurations Titan-15W-AL – 15.6-inch display with 1366 x 768 resolution, optional capacitive touchscreen; viewing angle: 80/80/85/85° (U/D/R/L) Titan-21W-AL – 21.5-inch display with 1920 x 1080 resolution, optional capacitive touchscreen; viewing angle: 89° in all […]

September 16, 2020September 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Pinephone Multiboot Image Boots 13 Different Linux Distributions

Pinephone Multiboot 13 Linux distributions

You’ve certainly heard about dual-boot systems with Windows and Linux, and possibly about triple-boot systems with an extra OS like Chromium OS or Android, but pine64’s forum user Megous has gone much further with a multiboot image for Pinephone able to boot 13 different Linux distributions! You’d think the image would occupy a lot of space on the device, but since all 13 distributions share the same Linux 5.9 kernel, all 13 operating systems fit on the internal eMMC flash or a MicroSD card with 8GB or greater capacity. The image is based on the p-boot bootloader allowing you to select the distribution of your choice and supports all PinePhones from the Braveheart Edition to the most recent revisions with 3GB RAM and 32GB storage. So what Linux distributions are supported by the multiboot image exactly? Here’s the list: Arch Linux Arm 2020-09-08 Lune OS 0.113 Maemo Leste 20200906 Mobian […]

September 16, 2020July 14, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

No password SSH – Login to a SSH server with private/public keys

If you often need to establish SSH connections to a server, entering the password each time may be a hassle or even a non-starter. For example, in our case, we use ssh connections in our nightly build scripts, so obviously entering a password would not be an option here… So it can be useful to configure the server and your client to accept secure ssh connection without the need to enter a password. What must be done, then, is to generate a public/private key pair, and copy the public part into the appropriate place on the server side. For doing this, on the user’s home directory, on the client machine, type:

local> ssh-keygen -t rsa -f ~/.ssh/id_rsa

1	local> ssh-keygen -t rsa -f ~/.ssh/id_rsa

-t tells the type of encryption -f tells where to store the public/private key pairs. In this case, the .ssh directory in the home directory is being used A password will be asked; leave this part blank, just […]