Operating Systems Category - Page 680 of 967 - CNX Software

January 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Independent Dual Display Support on Firefly-RK3288 Development Board (Video)

From time to time, I’m being asked which platform can support dual independent displays, and although I noticed Mele A1000 (Allwinner A10) did support dual displays in Linux, I never really investigated how well it handles it, so I normally recommend to have a look at x86 platforms with AMD or Intel processor that specifically claim support for dual independent display. But today, I’ve noticed a developer working for T-Chip posted a nice demo on T-Firefly forums with two displays connected via HDMI and VGA. The demo shows Firefly-RK3288 development board running Android with two displays in three configurations: Display Mirroring – The same content is shown on both display. Especially useful for digital signage application, where one board can drive two displays with the same content Extended Desktop – The user interface is extended on both monitors. It’s like having a single large monitor with a 32:9 aspect ratio […]

January 19, 2015January 10, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Atmel SAMA5D4 Xplained Ultra Development Board Adds HDMI, 720p Video Decoding

Atmel has introduced an upgrade to their Atmel SAMA5D3 Xplained development board with SAMA5D4 Xplained Ultra replacing SAMA5D36 by SAMA5D44 embedded micro-processor for 720p hardware video decoding support, and adding HDMI output, extra storage and memory, etc… but losing one Ethernet port. Atmel SAMA5D4 Xplained Ultra (XLUT) specifications: MPU – Atmel SAMA5D44 Cortex-A5 Microprocessor @ 536 MHz System Memory – 2x 2Gbit DDR2 memory Storage – 4 Gbit NAND Flash, 1x 4-bit SD card connector (not populated), 1x 4-bit micro SD connector, optional serial EEPROM (SPI), one EEPROM with MAC address and serial number. Connectivity – 1x Ethernet 10/100M Display – 1x LCD interface connector, 1x HDMI port USB – 1x micro USB device connector, 2x USB host connectors Debugging – 1x 20-pin J-TAG connector, 1x EDBG connector (not populated), 1x serial DBGU interface (3.3V) Expansion – Arduino R3-compatible headers, XPRO set of connectors; ADC inputs and CAN interfaces Misc […]

January 19, 2015January 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Install Ubuntu 14.10 on MeegoPad T01 with a Live ISO Image

MeegoPad T01 has recently been shown to boot Ubuntu and Android, but no installation disk had been provided so far. But thanks to deadhp1, there’s now a “beta” Ubuntu 14.10 image with MATE desktop environment available for download in order to try or install Ubuntu on MeegoPad T01, and other Intel Atom Bay Trail-T devices. Before you decide to try or install the image, be aware that audio and Bluetooth are not working for now, but everything else should work, including hardware video decoding in Kodi. If your device is not using a Realtek rtl8723bs module, Wi-Fi won’t work, and you may need to use a USB Ethernet dongle to get IP connectivity. The instructions will keep your Windows 8.1 installation too, albeit I suppose you could also wipe out the Windows 8.1 partition completely and run Ubuntu only on the device. If the instructions are not followed carefully, you […]

January 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Linux based Vu+ DVB Set-top Boxes Now Support XBMC/Kodi

Vu+ Duo2, Solo2 and Solo SE are high-end Linux based DVB receivers powered by Broadcom processors made by Ceru, and with a relatively active community of users and developers. All three models have recently received support for XBMC in their “Black Hole” firmware. Solo SE is the most recent model having been released in 2014, against Duo2 and Solo2 that have been selling since 2012 according to Wikipedia. Since I’ve never heard about these, I’ll check out Duo2, as it comes with the most features out of the three. Vu+ Duo2 specifications: SoC – Broadcom BCM7424 dual core MIPS processor @ 1.3 GHz with VideoCore IV GPU System Memory – 2GB RAM Storage – 1 GB NAND flash + SATA III interface for 2.5″ and 3.5″ HDD (internal) + eSATA + Video Output – HDMI, SCART, Composite, and Component (YPbPr) Audio Output – HDMI, stereo audio, and optical S/PDIF Tuners – […]

January 16, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Mini Review of VidOn Box Android Media Player

Vidon Box is an Allwinner A31s based TV box made by Vidon.me, a Diamond sponsor for Kodi entertainment center. I’ve already listed specs, subscriber services, and uploaded pictures in the unboxing post, so it’s time for a review. Since Allwinner A31s has been around for a while, I’ve decided to write a shorter review. First Boot, Setup, and First Impressions Since the box provides some services with a subscription, with a free 1-year top-up card included, you’ll probably want to register an account on Vidon.me first, as it’s needed to activate all services in the box as shown on the back of the top-up card. After the optional Subscription is $14.99 per year, and it’s only needed if you need features like Blu-ray navigation, or audio pass-through. The simple remote included does the job if you only use the box for settings and XBMC, but otherwise you’ll need an air […]

January 16, 2015January 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Understanding Windows 8.1 Licenses with MeegoPad T01 (and Other Intel Atom Bay Trail mini PCs)

MeegoPad T01 was initially announced as a dual boot Windows 8.1 and Android 4.4 HDMI Stick, and it became quite popular. But as it has recently started shipping, Android is gone, and people who receive it only have Windows 8.1 to play with. Unfortunately, as the review embedded at the end of this post clearly indicates it’s running with a Windows 8.1 trial version that needs to be activated and with an invalid serial number, so it can only be used for 30 days… Normally, I would not be so interested in a Windows 8.1 only device, but since many people seem to have acquired one, it’s probably useful to look into what can be done about the license. So what could you do? There are several options: One person decided to buy a Windows 8.1 License. Cost? $119.99 + $7.20 for tax for a grand total of $127.19, or […]

January 15, 2015January 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Mediatek based Xiaomi Mi Box mini Android TV Box Sells for $32

Today (2015/01/15), Xiaomi has launched four new products: Mi Note and Mi Note Pro 5.5″ Android smartphones powered by Qualcomm Snapdragon 801 and 810, Mi Headphones (audiophile-grade), as well as Mi Box mini. The latter is a tiny Android TV box powered by a quad core ARM Cortex-A7 processor, with 1GB RAM and 4GB Flash, and selling for just 199 RMB in China (~$32 US). Mi Box mini specifications: SoC – Mediatek MT8685A quad core ARM Cortex A7 @ 1.3Ghz with Mali-450MP4 GPU (4 fragment + 2 vertex cores) System Memory – 1GB DDR3 Storage – 4GB eMMC 4.5 flash Video & Audio Output – HDMI up to 1080p with Dolby and DTS pass-through Video Codecs – Support H.265 Connectivity – Dual band 802.11 b/g/n Wi-Fi + Bluetooth 4.0 Power Supply – Integrated into device. 100-240V input Dimensions – 38 x 38 x 38? mm Weight – 73 grams The […]

January 15, 2015January 15, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Axiomtek Introduces a Fanless 17″ Touch Panel Computer Powered by Intel Celeron J1900 Processor

Axiomtek, a Taiwan based manufacturer of industrial computers & embedded systems, has (not-so-recently) launched GOT3177T-834-FR fanless panel computer with a 17″ multi-touch screen, and powered by an Intel Celeron J1900 “Bay Trail-D” quad core processor with up to 8GB RAM, and SATA or CFast interfaces. Target applications include transportation, train, control platform of ships, heavy industry, and oil pipe monitoring systems. GOT3177T-834-FR panel compute specifications: SoC – Intel Celeron Processor J1900 quad core processor (2M Cache, up to 2.42 GHz) with Intel HD graphics System Memory – 1x 204-pin DDR3L SO-DIMM socket (Maximum memory up to 8GB) Storage – 1x 2.5” SATA, 1x CFast slot or mSATA Display – 17” SXGA(1280×1024) LCD with LED backlight; Flat resistive touch Audio – 1x Line-out Connectivity – 2x RJ45 for Giga Ethernet (Intel i210IT), optional WLAN/3G module & antenna USB – 2x USB 3.0 port, 2x USB 2.0 host ports Serial – 2x […]