AMLogic Category - Page 73 of 93 - CNX Software

March 11, 2015March 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 226 Comments

Giveaway Week – RipplTV Quad Core Android Media Player

Today, I’d like to give away RipplTV, an Android TV box based on M8 hardware with Amlogic S802, 2GB RAM, and 8GB eMMC, but putting XBMC front and center, as the popular media center is used as the default launcher in this media player. When I tried RipplTV, the device had a much better firmware than M8/TM8 from the same company (Shenzhen Tomato), although it was not always trouble free, as 3D gaming could be problematic (Riptide GP2), and I had to clear data for XBMC once to have it run correctly, but overall a pretty decent device. It probably never became very popular through due to the rather large difference in price with M8 TV box. You can get full specs and more pictures in the unboxing post. Please note that the 5V/2A power adapter is not included, since I cut the cable for some other purpose, so you’d […]

March 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Android 4.4 Source Code Released for ODROID-C1 Board

ODROID-C1 development board was launched on December 10, 2014, and a few days later U-boot and Linux source code was released for this low cost Amlogic S805 board, but Android was only due later due to licensing issues. I’ve just noticed Hardkernel uploaded Android 4.4 source code to github at the end of February. The build instructions are provided on ODROID-C1 wiki, and there are quite straightforward. You’ll need to type four command lines to get the code in a working directory:

mkdir odroid-c1
cd odroid-c1
repo init -u https://github.com/hardkernel/android.git -b s805_4.4.2_master
repo sync

mkdir odroid-c1

cd odroid-c1

repo init -u https://github.com/hardkernel/android.git -b s805_4.4.2_master

repo sync

and three more to build an Android image:

source build/envsetup.sh
lunch odroidc-eng
make -j8

source build/envsetup.sh

lunch odroidc-eng

make -j8

All relevant binary files (system, userdata, bootloader, kernel…) will be located in out/target/product/odroidc/ directory, and can be flash to your board via fastboot. Alternatvely, you can create an Android SD card image (out/target/product/odroidc/selfinstall-odroidc.bin) with:

make selfinstall

1	make selfinstall

That means developers will be able to easily customize source code for ODROID-C1 board, but they should also be able use this base […]

March 9, 2015March 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Beelink i one (i826) / Ubox i828 Quad Core Amlogic Media Player & Recorder with HDMI Input

There are very few Android TV boxes capable of recording video over HDMI. One of them is Zidoo X9 which works pretty well as long as you use the built-in apps, but playing 4K and/or H.265 with Kodi is a disaster, and despite Mstar MS09810 being a quad core Cortex A9 processor, the actual performance barely better than Amlogic AML8726-MX dual core Cortex A9 processor due to the poor memory bandwidth. But now, if you’d like a system with HDMI PVR function, but better performance and good Kodi support, Beelink i one (i826) could be an option with its Amlogic S812 processor and HDMI input support. There’s also a similar looking UBox i828 featuring Amlogic S802 processor which lacks H.265 support. i one / Ubox i828 specifications: SoC i one – Amlogic S812 quad core ARM Cortex A9r4 at 2.0GHz with ARM Mali-450MP6 GPU Ubox i828 – Amlogic S802 quad […]

February 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ZRRO Android Game Console Includes a Hover and Touch Controller (Crowdfunding)

Android games are fun to play… on smartphones and tablets, but if you want to play such games on a TV screen via an Android mini PC, it can become more problematic, as most of the games were designed for touchscreen, so you have to be prepare to juggle between input devices.. In my reviews, I have to play Candy Crush Saga with an air mouse, and I switch to a wireless gamepad for racing games such as Riptide GP2 or Beach Buggy Racing, while some games are simply not playable at all without touch emulation, unless you install a software remote such as Droidmote on your smartphone, and use the latter as a controller, which may not be ideal either. ZRRO, an Israeli company, came with a new package comprised of an Android game console (ZRRO Box), and a game controller (ZRRO Pad) featuring a hover and touch surface […]

February 17, 2015February 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Power Consumption of Amlogic S812 and Rockchip RK3288 TV Boxes

The recent post comparing the power consumption of ODROID-C1 vs Raspberry Pi boards, as made me want to give another try at power consumption measurements. Regular reader already know I made a power measurement board and cables capable of hading different connectors (micro USB, mini USB, power barrels, etc..), but eventually it failed to deliver enough current to the boards for any meaning testing. But since I now have a better power supply, and multi-meter, it was worth another try, especially since I could draw some pretty charts. I decided to test the three most popular Chinese SoCs for mini PCs namely Amlogic S812 (4x Cortex A9), Rockchip RK3288 (4x Cortex A17), and Allwinner A80 (4x Cortex A15 + 4x Cortex A7) using respectively Eny M8S, Open Hour Chameleon, and A80 OptimusBoard. If you are paying attention, you must have noticed Allwinner A80 is not part of the title, that […]

February 16, 2015February 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

M9 Android TV Box Based on Amlogic S812 Sells for $63 (Promo)

M9 (aka E8 Plus) is yet another Android media player powered by Amlogic S812 with 2GB RAM and 8GB flash, but it’s currently selling for $62.71 including shipping on Aliexpress from a seller with positive feedback. The offer is valid for 17 hours more. M9 specifications: SoC – Amlogic S812 quad core cortex A9r4 @ 2 GHz with octa-core Mali-450MP6 GPU @ 600+ MHz System Memory – 2 GB DDR3 Storage – 8GB NAND flash + SD card socket Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi, Bluetooth 4.0 Video Output – HDMI 1.4b up to 4K2K @ 30 Hz, AV port Audio Output – HDMI, AV, optical S/PDIF Video Codecs – 4k2k H.264, H.265 UHD, HD MPEG1/2/4, AVC/VC-1, RM/RMVB, Xvid/DivX3/4/5/6, RealVideo8/9/10, Audio Formats/Codecs – MP3, WMA, WAV, OGG, FLAC, APE, AC3, AAC etc… Dolby TrueHD & DTS-HD pass-through USB – 3x USB 2.0 host ports Misc – Power […]

February 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

HD18T Android DVB-T2 Receiver Mini Review

I’ve had HD18T Android TV box with a DVB-T2 tuner for several months, but I’ve only installed a roof antenna recently, so I’ve decided to give it another try since my indoor antenna did not pick-up any signal with that box. The set-top box is also known as EM6-T2 or HD18T2, and features Amlogic AML8726-MX dual Cortex A9 processor which has been used in numerous boxes in the past, so I will only focus on my experience with the DVB app in this mini review. If you want to use DVB-T2 go straight to the right and click on DVB app. Where you’ll then be greeted with a pop-up windowsasking if if you want to scan channels. You can do autoscan, manual scan (for one frequency), select the area (France/Taiwan/UK/Italy/Australia only), and enable/disable LCN (Logical Channel Numbering). At first I selected “Australia”, and the system did not find any channels, […]

February 12, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Raspberry Pi, Banana Pi, and ODROID-C1 Boards Power Consumption

Mikronauts has recently reviewed MIPS Creator CI20, ODROID-C1, and Raspberry Pi 2 Model B. R-PI 2 review is especially interesting since this is the last one, and the reviewer goes to compare all Raspberry Pi models (A, A+, B, B+ and 2 B) with Banana Pi, Banana Pro, MIPS Creator CI20, and ODROID-C1 development boards. The benchmark results are good to know, and expected with ODROID-C1 the fastest of the bunch both in terms of CPU and storage performance, but here I’ll just share the results of his power consumptions testing. Since all platforms are powered by a 5V power supply, I’ve converted the results into watts. Model Max (W) Avg (W) Off (W) A 1.07 0.80 0.15 A+ 0.76 0.48 0.125 B 2.45** 2.12 0.62 B+ 1.20 1.15 0.35 2 B 2.25 1.55 0.325 Banana Pi 2 1.25 0 Banana Pro 2.3 1.62 0 Odroid-C1 2.3 1.62 0.735* * […]