Nvidia Tegra K1 Category - Page 2 of 8 - CNX Software

January 25, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Autonomous Deep Learning Robot Features Nvidia Jetson TK1 Board, a 3D Camera, and More

Autonomous, a US company that makes smart products such as smart desks, virtual reality kits and autonomous robots, has recently introduced a deep learning robot that comes with a 3D camera, speaker and microphone, Jetson TK1 board, and a mobile base. The robot appears to be mostly made of the shelves parts: 3D Depth camera – Asus Xtion Pro 3D Depth Camera Speaker & Microphone Nvidia Jetson TK1 PM375 board – Nvidia Terra K1 quad-core Cortex A15 processor @ 2.3 GHz with a 192-core Kepler GPU, 2GB RAM, 16 GB flash Kobuki Mobile Base – Kobuki is the best mobile base designed for education and research on state of the art robotics. Kobuki provides power supplies for external computer power as well as additional sensors and actuators. Its highly accurate odometry, amended by calibrated gyroscope, enables precise navigation. The robot is designed for research in deep learning and mobile robotics, […]

January 14, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

CYCLONE F100 Tegra K1 Fanless Embedded Computer Supports up to 8GB RAM, SATA, and Various Networking Options

Calao Systems has added a new member to the their rugged embedded computers family with Cyclone F100 powered by Nvidia Tegra K1 quad core Cortex A15 processor with up to 8GB RAM, optional industrial grade SATA Nandrive, and mSATA, dual Gigabit Ethernet, and mPCIe connectivity options for IoT and M2M with LoRA, WiFi, RF radios, etc… Target applications include surveillance, identification, transport, robotic, graphic enhanced digital signage, and medical equipment. Cyclone F100 specifications: SoC – Nvidia Tegra K1 quad-core ARM Cortex A15 processor @ 2.3 GHz with 192-core Kepler GPU supporting OpenGL 4.4, OpenGL ES 3.1 and CUDA/GPGPU System Memory – 2 GB DDR3L (Options for 4 and 8GB on request) Storage – 8 GB eMMC, 8 MB SPI flash and micro SD card slot. Optional: Industrial grade SATA Nandrive, mSATA socket Video Output – HDMI, options: LVDS and DisplayPort Audio I/O – HDMI, optical S/PDIF out, Mic In / […]

November 11, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Nvidia Tegra X1 Development Board is Finally Available… for $599

When Nvidia introduced Nvidia Tegra X1 octa processor with a 256-core Maxwell GPU at the very beginning of the year, I was expecting Jetson TX1 is follow suit in the next few months, but instead the company launched Nvidia Shield Android TV box based on the processor. The company has now launched Jetson TX1 module and development board. Let’s check the module first and its main specifications and features: SoC – Nvidia Tegra X1 octa core processor with 4x ARM Cortex A57 cores, 4x ARM Cortex A53 cores, and a 256-core Maxwell GPU System Memory – 4GB LPDDR4 (25.6 gigabits/second) Storage – 16GB eMMC Connectivity – 802.11ac 2×2 Bluetooth ready, Gigabit Ethernet Video – 4K video encode and decode Camera – Support for 1400 megapixels/second Dimensions – 50mm x 87mm The module support Linux4Tegra operating system based on Ubuntu. Libraries and drivers to leverage the Maxwell GPU include cuDNN CUDA-accelerated […]

November 7, 2015November 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Nvidia Jetson TK1 Development Board is Now Selling for $99 (Promo)

Sorry that I don’t have an Nvidia Jetson TK1 board to give away…, but if you were interesting in getting one the best ARM Linux boards available today, and found the $192 price tag a little too high, Make announced a ~50% discount offer to get the board for $99 on Nvidia store using MAKEJTK1 coupon. Here’s a reminder of the board’s specifications: SoC – Nvidia Tegra K1 SoC with 4-Plus-1 quad-core ARM Cortex A15 CPU, and Kepler GPU with 192 CUDA cores (Model T124) System Memory – 2 GB x16 memory with 64 bit width Storage – 16 GB 4.51 eMMC memory, SATA data + power ports, full size SD/MMC slot, and 4MB SPI boot flash. Video Output – HDMI port Audio – ALC5639 Realtek Audio codec with Mic in and Line out Connectivity – RTL8111GS Realtek GigE LAN USB – 1x USB 2.0 OTG port, micro AB, 1x […]

November 5, 2015July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

EmbPower Provides Nvidia Tegra K1 RTX Modules, Carrier Boards, and Industrial Computers

EmbPower is a Taiwanese company that first focused on graphic cards, but has since then also developed other solutions requiring high GPU performance for military & aerospace applications as well as medical equipment. One of these products is TK1 Carrier Board with TK1 SoM powered by Nvidia Tegra K1 quad core processor, that can be encapsulated into TK1 PowerUnit industrial computer. There are actually two TK1 carrier boards: the larger V1.2 with more ports and features, and the smaller V2.0 that is used in TK1 PowerUnit Box, but they share most of the same (preliminary) specifications: SoC – Nvidia Tegra K1 quad core ARM Cotax-A15 processor with Nvidia Kepler 192-core GPU System Memory – 2GB DDR3 @ 933 MHz Storage – 16GB eMMC flash and SPI serial flash. V2.0 only: Adds micro SD slot; V1.2 only: Adds SD slot and SATA Connectivity – Gigabit Ethernet; optional 802.11ac and Bluetooth 4.0 […]

November 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Manifold mini PC Powered by Nvidia Tegra K1 Processor is Designed for Drones

DJI is known for their high-end drones such as Phantom 3 quadcopter, but the company has now launched Manifold mini PC powered by Nvidia Tegra K1 quad core Cortex A15 processor and running Ubuntu 14.04 in order to allow developers run their own applications performing complex computing tasks and advanced image processing “on the fly”. DJI Manifold specifications: SoC – Nvidia Tegra K1 quad core Cortex-A15 processor @ up to 2.2 GHz with 192-core Kepler GPU System Memory – 2GB DDR3L Storage – 16GB eMMC 4.51 flash, micro SD slot Video Output – mini HDMI port Audio I/O – mini HDMI, combo audio jack for microphone and headphone Connectivity – Gigabit Ethernet port USB – 2x USB 3.0 ports, 2x USB 2.0 host ports, 1x micro USB port (supports Force Recovery mode and Host mode) , and a non-standard USB 2.0 interface with the drone. Camera – Camera In and […]

September 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Calao Systems SMC-NTEK1 is a SMARC System-on-Module Powered by Nvidia Tegra K1

Calao Systems has introduced a new system-on-module compliant with SGET SMARC specifications, and powered by Nvidia Tegra K1 quad core Cortex A15 processor, that targets embedded systems for vision, video, data analytic and high computing applications. Calao SMC-NTEK1-IXX module specifications: SoC – Nvidia Tegra K1 quad core Cortex A15 processor with a Kepler GPU System Memory – 2GB DDR3L Storage – 8 GB e-MMC, 8 MB SPI Flash, 1x EEPROM with unique S/N and MAC address Security – 1x Trusted Platform Module (TPM), 1x Crypto Authentication I/Os via MXM3 edge connector: Storage – SATA 3Gb/s, 1x SDIO Video Output – 1x LVDS, 1x HDMI Video Input / Camera – 2x CSI Audio I/F – 1x I2S, 1x S/PDIF Out Debugging – 1x JTAG Network connectivity – 1x Gigabit Ethernet USB – 2x USB 2.0 Host, 1x USB 2.0 OTG 1x PCIe x1 4x UART, 1x SPI, 3x I2C, 12x GPIO […]