Testing Category - Page 100 of 159 - CNX Software

April 21, 2016 by Karl Johnson - 5 Comments

Matricom G-Box Q2 Android TV Box Review

Another guest review from Karl, this time, with Matricom G-Box Q2 Android 5.1 TV box based on Amlogic S812 processor. First Impressions Today I will be reviewing the G-Box Q2 by Matricom. This is a follow up device to the popular G-Box Q. The first day I plugged it in and did some basic first impressions I thought it was laggy…..but after using it and setting up the way I am accustomed to using it…I found it very fast and responsive. From the time power is applied to launcher is loaded is about 33 seconds. The software seems solid and I ran into only minor issues. It got very respectable scores between 38000 and 42000 on Antutu. The box does have a lot of software that I am not a fan of, but these can be easily uninstalled. The launcher that comes with it is ok but I prefer a […]

April 20, 2016April 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 63 Comments

Xiaomi Mi WiFi 3 Router Unboxing, Teardown, and Serial Console

Mi WiFi 3 is the new low cost 802.11ac WiFi router by Xiaomi that sells for about $40. GearBest send my one sample for evaluation, and today, I’ve taken some photo of the device and board, and connected the UART pin to see if the serial console was accessible for people who want to try to port OpenWrt for example. Xiaomi Mi WiFi 3 Unboxing There’s some information on the package, but everything is in Chinese, except the part about AC1200 meaning it supports up to 867 Mbps with 802.11ac and 300 Mbps using 802.11n. The router comes with a 12V/1A power supply, and a user’s manual in Chinese only. There’s also a QR code inside the box linking to the Android and iOS apps, available both in English and Chinese, so actually that one of the few Xiaomi product that should be easy to use outside of China without […]

April 20, 2016April 20, 2016 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Android and Linux Benchmarks on MiQi Development Board

MiQi is an upcoming low cost development board powered by Rockchip RK3288 SoC that will sell for $35 with 1GB RAM and 8GB storage, and $69 for the version with a 2GB / 32GB combination. Since Rockchip RK3288 was launched in 2014, most available benchmarks were made on Android 4.4, and since MiQi is the first low cost board based on the processor, other RK3288 based board such as FireFly have not been that popular. So I’ve decided to run updated benchmarks in MiQi both in Android 5.1 and Linux (Lubuntu 14.04), which was easy since a dual boot image is pre-installed. But since I received an early sample without heatsink, I found a spare heatsink added some thermal paste and placed it on top of the processor and partially on RAM and eMMC flash. MiQi Board Android 5.1 Benchmarks I ran Antutu both using 1080p60 and 2160p30 video output, […]

April 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Mini Review of NextDrive Plug for Private Cloud Storage and Home Security

NextDrive Plug is an ARM based plug computer that’s used to store your photos or music, and/or as a security system using a webcam combined with Pixi motion sensor. They had a successful crowdfunding campaign, and now that they’ve sent rewards to backers, I’ve also received NextDrive Plug and Pixi for evaluation. The courier was not particularly gentle with the packages, but the devices themselves were not damaged. NextDrive Plus package included the box, a US plug, and a user’s manual in English. Pixi comes with two 3M stickers, and a user’s manual. There’s also a plastic film to avoid depleting the battery, that you’ll need to remove before using the sensor. The interfaces on the plug are minimal with a USB port for a USB mass storage device (HDD, flash drive…) and/or a UVC webcam, and the socket for the power plug adapter on the back.You can then plug […]

April 18, 2016April 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Doogee Smart Cube P1 Android Projector Unboxing and Quick Try

Doogee Smart Cube P1 is an Android 4.4 projector that looks somewhat like a Rubik’s cube, powered by Amlogic S805 processor and featuring Texas Instruments DLP solution. GearBest sent me a sample for review, and today, I’ll start by checking the device itself, before writing a review in a few days. The mini projector only ships with a 5V/2A power supply / charger, and its USB cable. So your smartphone will have to be the remote control, unless you connect an RF dongle for your air mouse or wireless keyboard. There’s also no user’s manual either. Not that I normally read them, but a description of the features would have still been nice. Anyway, it’s easy enough to find out. The projector is on one side, the blue and yellow side features with a USB port and reset pinhole, and the red and white side, the micro USB port for […]

April 18, 2016April 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Xiaomi Mi Box 3 Enhanced Review

We’ve already taken Xiaomi Mi Box 3 Enhanced TV box apart in the unboxing and teardown post, and after changing the language to English, seen the performance is excellent thanks Mediatek MT8693 hexa-core processor, so I’ve done further experiments and tests with the device, and will report my findings in this review. Settings and Power Handling and Consumption Mibox 3 Enhanced boots reasonably fast I can get to the user interface within 30 seconds. We’ve already the main GITV user interface in previous posts, but I had not gone through the settings yet. There are eight main sections: Display Resolution settings – 3840×2160 @ 60/50/SMPTE24/30/24 Hz, 1080p @ 60/50 Hz, 720p @ 60/50 Hz, Scale and position – For overscan adjustment Sound Button sounds – On/Off Sony/Philips Digital Interface Format – PCM/Raw data (actually used for HDMI audio pass-through) System_update – MIUI TV firmware OTA update Device & Bluetooth – […]

April 13, 2016May 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Windows Subsystem for Linux (Ubuntu Bash on Windows) Benchmarked Against Native Ubuntu 14.04 and 16.04

Microsoft recently announced that they brought Ubuntu userspace to Windows, and that this features will be officially released in Windows 10’s Anniversary Update and called Windows Subsystem for Linux. But people part of the company’s insider program can already try the beta version of “Bash on Windows”, and Phoronix ran some benchmarks in bash in Windows 10, and repeated the tests in Ubuntu 16.04, Ubuntu 14.04, and Clear Linux. The test machine was based on an Intel Xeon E3-1280 v5 Skylake CPUwith 16GB of RAM and 120GB Samsung 850 EVO SSD. Many of the results show Windows Subsystem for Linux (I’ll just call it Windows 10 in the rest of the post) just performing a little slower than on the Linux distributions, but there are also some outliers, which I’m going to cover here. The most surprising results is when Windows 10 clearly outperforms Linux at its own game which […]

April 12, 2016April 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

Xiaomi Mi Box 3 Enhanced / Pro (Mediatek MT8693) Benchmarks and System Info

Xiaomi Mi Box 3 Enhanced is the first TV Box I’ve tested with a processor featuring ARM Cortex A72 cores, so I’m very eager to see how its performs, and I’m expecting it to be quite faster than Rockchip RK3288, but still not quite matching Nvidia Tegra X1 processor found in Nvidia Shield Android TV box. But first let’s check the system information with CPU-Z app. First, it looks like CPU-Z does not detect big.LITTLE processor very well, as it detect a six core ARM Cortex-A72, instead of a six core processor with two Cortex A72, and four Cortex A53 cores. The clock speed ranges between 507 MHz and 1.57 GHz, but that’s likely the number for the Cortex A53 core, as the marketing materials report the Cortex A53 cores run at up to 1.6 GHz, and the Cortex A72 cores up to 2.0 GHz. Antutu info reports the frequency […]