FTLAB FSG-001 is a $30 Geiger Counter / Radiation Detector for Android & iOS Smartphones

I’ve just read an article on Tizen.org about Samsung and Intersoft Eurasia collaboration about a “personal radiation monitoring device DO-RA” sending data over Bluetooth 4.0 LE. But a visit to their website showed other models such as DO-RA-Q using a 3.5mm audio jack, and compatible with smartphone, and Windows & Linux computer. I could not find any of their devices for sale, so I searched for some alternatives, and I found FTLAB FSG-001 radiation counter on Aliexpress, Amazon and eBay selling between $30 and $40. FTLAB FSG-001 Geiger counter specifications: Radiation measurement of: gamma, X-rays Measurement range – 0.1 to 200 μSv/h Measurement error –  <30% within a given deviation between Dimensions – Φ10 x 30 mm (total length: 47mm with 3.5mm audio jack) Weight – 6 grams Operating temperature – 10 to 40 ℃ You’ll need to plug the dongle into your smartphone audio jack, and download FTLAB “SmartGeiger” […]

SCISHION V88 Rockchip RK3229 TV Box Sells for $19.99 (Promo)

Entry-level Android TV boxes are now already pretty cheap, and in the past we’ve seen deals in for around $25 and less, but with SCISHION V88, I think it’s the first time I see a new 4K Android TV box selling for less than $20 shipped. SCISHION V88 specifications: SoC – Rockchip RK3229 quad core ARM Cortex A7 processor @ 1.5 GHz with  ARM Mali-400MP2 System Memory – 1GB DDR3 Storage – 8GB eMMC flash + SD card slot up to 16GB Video Output – HDMI 2.0 up to 4K2K @ 60 fps, and 3.5mm AV output (composite) Audio Output – HDMI, AV, and coaxial S/PDIF Connectivity – 10/100Mbps Ethernet, 802.11 b/g/n WiFi USB – 4x USB 2.0 host ports Power Supply – 5V/2A Dimensions – 11.6 x 11.6 x 2.5 cm The devices runs Android 5.1, and ships with a power adapter, a HDMI cable, an IR remote control, […]

Chuwi Vi10 Plus Remix OS 2.0 Tablet Powered by Intel Atom x5-Z8300 SoC is up for Pre-order for $140

Chuwi Vi10 Plus tablet features a 10.8″ full HD display, an Intel Atom x5-Z8300 processor with 2GB RAM and 32GB storage, but instead of running the usual Windows 10 or Android operating systems, it’s running Remix OS 2.0 fork of Android with desktop improvements. Chuwi Vi10 Plus specifications: SoC – Intel Atom x5-Z8300 quad core “Cherry Trail” processor @ 1.44 / 1.84 GHz with Intel HD graphics (2W SDP) System Memory –  2 GB DDR3L Storage – 32 GB eMMC + micro SD slot up to 128GB Display – 10.8″ IPS touch screen display with 1920×1280 resolution; 10-point touch Video Output – 1x micro HDMI Audio I/O – micro HDMI, 3.5mm microphone jack, built-in microphone, built-in speakers Connectivity – 802.11 b/g/n Wi-Fi, and Bluetooth 4.0 USB – 1x USB type C, 1x micro USB port Camera – 2.0 MP front-facing and rear cameras Sensors – Gravity and others? Misc – […]

Jiayu S3 and S3 Plus Smartphones Get Android 6.0 Firmware Releases with Source Code

Jiayu S3 and S3 Plus are your typical Android smartphones powered by Mediatek MT6752/MT6753 octa core Cortex A53 processor with 3GB RAM, 16GB flash, and a 5.5″ touch screen display. The news here is that Jiayu Germany (a reseller, not the manufacturer), and Team M.A.D (Mediatek Android Developers) comprised of XDA members, have releasing three custom ROMs based on Android 6.0.1 for the smartphone: Cyanogenmod13, Paranoid Android (AOSPA) and AICP (Android Ice Cold Project), which contrast with my Iocean MT6752 smartphone still stuck on Android 4.4.4. I’ll reproduce the technical specifications of Jiayu S3+ phone for reference: SoC- Mediatek MT6753 Octa-core 64-bit ARM Cortex A53 processor @ 1.3 GHz, with ARM Mali-T720 GPU System Memory – 3GB RAM Storage – 16 GB eMMC + micro SD slot up to 64GB Display – 5.5” IPS capacitive touchscreen display; 1920×1080 resolution Connectivity – 802.11 b/g/n/ac Wi-Fi , Bluetooth 4.0, GPS / A-GPS, FM Radio Cellular […]

Bagel is a Smart Bluetooth Tape Measure Compatible with Android and iOS Phones (Crowdfunding)

The tape measure is a pretty simple tool allowing you to measure length, and I assume most people will write results on a piece of paper. Battery powered Bagel tape measure changes that as it allows measurements with a string, through a wheel, or an ultrasonic sensors, store the data in its internal memory with voice to text memo, and also sends back data over Bluetooth to your smartphone. Bagel Labs tape measure specifications: Three measure modes – string (up to 3 meters), wheel (up to 10 meters), or ultrasonic sensor (0.3 to 5 meters) Storage – 32 MB flash for up to 100 measurements and voice memo (Both metric and imperial units supported) Connectivity – Bluetooth 4.0 LE Audio – Microphone for voice to text recording Display – 0.96″ OLED display; 128×96 resolution USB – 1x micro USB port for charging Misc – laser pointer for ultrasonic measurement; save […]

96Boards Gets a TV Platform Edition Targeting $50 Mid-range Boards, $99 High-end Boards

96Boards was born as a hardware and software standard with Consumer (CE) & Enterprise Editions (EE), with different form factors with the latter focusing on server boards, but with similar software requirements requiring recent and mostly open source software. The consumer edition was also split into “Standard” and “Extended” editions, which the latter allowing for larger boards with more features, while the Enterprise Edition has its own larger format, as well as an option for micro-ATX form factor. I’ve just learned that a “fifth” 96Boards standard has been worked on with 96Board TV Platform for Home Gateways, OTT Streaming boxes, and TV boards with prices target of $50 or lower for mid-range boards, and $99 or lower for high-end boards. 96Boards TV Platform hardware requirements: Dimensions – 160 x 120 mm (EE Standard form factor) RAM – 1GB minimum; 2GB recommended Flash – 8GB eMMC minimum WiFi – 802.11 g/n […]

EBox T8-4 Review – A 4K Android TV Box Bundle Geared Towards the UK Market

I’ve already taken some pictures of the device and board in part 1 of EBox T8-4 review, so today, I’m going to report my experience with the Android 5.1 firmware for this Amlogic S905 TV box, air mouse, and wireless gamepad, specifically targetted to users leaving in the United Kingdom, but since the hardware is based on Zoomtak T8V, it may also be informative to international users, although the firmware, mostly launcher and IPTV services, will be different. EBox T8-4 Setup Wizard & Configuration Since I’ve already inserted an internal SSD into the SATA bay of the device, I did not connect an external USB harddrive, and only connected HDMI and Ethernet cables,  plus the RF dongle for the included air mouse, a USB keyboard to easily take screenshots, and of course the power cord. The power button will be red at this stage. If you want to start the […]

Review of No.1 D6 Android Smartwatch Powered by Mediatek MT6580 Processor

Karl here with a new review. This one is a little different. A smart watch, but not your average smart watch, as most smartwatches supplement a phone. This is a standalone smartwatch. It runs full Android 5.1. It is the D6 by No. 1. It has a 3G radio and SIM card slot. I was really excited when I found out I could do this review. Below are some pics from their website. Another professionally shipped and packaged product and some box pics Here are the specs from No. 1’s website. Product Overview Model NO.1 D6 Product modeling Android Smartwatch System Android 5.1 CPU MT6580 quad core Cortex A7 @ up to 1.3 GHz with Mali-400MP2 GPU Screen Resolution 1.63″ 320 x 320 resolution RAM 1GB ROM 8GB Wifi Support Google Play Support Features Make calls Support See text messages Support Contacts Support Heart Rate Support Pedometer Support Bluetooth BT2.1 + […]

Exit mobile version