Android News - Page 213 of 375 - CNX Software

April 29, 2015September 3, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ventana GW5220 ARM Linux SBC Supports WiFi, Wimax, 3G Cellular Connectivity & PoE

Gateworks recently launched another Freescale i.MX6 board part of theur Ventana family with Ventana GW5220 single board computer with Freescale i.MX6 dual processor, HDMI out, Ethernet, and a PCIe slot that takes modules adding WiFi 802.11 b/g/n/a, 4G Wimax, and 3G (CDMA/GSM) connectivity, as well as other compatible PCIe modules. Gateworks GW5520 board specifications: SoC- Freescale i.MX6 Dual with 2x Cortex A9 core @ 800MHz and Vivante GPU System Memory – 512 MB (default) to 2GB DDR3-800 SDRAM Storage – 256 MB (default) to 2GB Flash, micro SD slot, serial configuration EEPROM Connectivity – 1x Gigabit Ethernet port (RJ45) Video Output and Input – HDMI 1.4 out, CVBS, Y/C, and YPbPr inputs, LVDS output (TIA/EIA 644-A) Audio – HDMI, analog stereo Line In/Out, or Headphone/Mic Expansion – 2x Mini PCIe sockets including one supporting USB and SIM socket, and the other supporting PCIe, mSATA and USB signals. Other I/O ports: […]

April 28, 2015April 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Intel Atom Z3735F mini PC Power Consumption in Android

I’ve already measured power consumption running Antutu and playing a 4K video on Rockchip RK3288 and Amlogic S812 platform, as described in “Power Consumption of Amlogic S812 and Rockchip RK3288 TV Boxes“, and now that I have an Intel Bay Trail-T mini PC running Android 4.4 with Wintel W8, I was interested in comparing its power consumption to the ARM platform. [Update: I forgot to mention measurements have all been done @ ~5V.] The test normally consists in several steps: Boot the device Run the latest Antutu benchmark Connect a USB hard drive Play a 4K video in Kodi from the hard drive Diconnect the hard drive Power off the device But since the current draw was a little to high at times, I got a few issues with my setup. First, I had to boot twice hence the “Power On 1” and “Power On 2” strings on the chart, […]

April 28, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ottobox Smart Wi-Fi Electric Socket Learns Your Schedule to Save Electricity (Crowdfunding)

There are already quite a few smart Wi-Fi electric sockets like Kankun KK-SP3, Broadlink SP2, or Orvibo Vivo S20 among others that cost between $20 and $45 shipped. They can all be controlled via an Android or iOS app either via the touch of a button, or by setting schedules, and some can also measure power consumption. But what they can’t do, is to automatically learn your schedule or habits, and detect whether you are at home or not, and that’s exactly what Ottoxbox has been designed to do. Ottobox hardware specifications: MCU – Unnamed ARM based micro-controller Connectivity – Wi-Fi and Bluetooth 4.0 Sockets and charging ports 1x 3-pin power socket 2x USB port to charge devices Misc – Multicolor LEDs Mains Voltage – Supports 120V / 220V / 230V and US & UK plug types, and possibly EU too (TBC) Dimensions – 10.80 x 3.8 x 3.8 cm […]

April 28, 2015April 28, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

ZTE ZX296702 Dual Core Cortex A9 SoC Boots Android in 10 Seconds with TuxOnice

ZTE XZ296702 is a dual core Cortex A9 processor with a Mali-400 GPU that targets Android set-top boxes and media players, and while Charbax filmed a video with ZX296702-AD1 development board at Linaro Connect HK, initial patchsets were recently submitted to the Linux ARM Kernel mailing list for XZ296702 SoC and the development board. There aren’t any product page for ZX296702 processor, so instead let’s have a look at the board’s specifications: SoC – ZTE ZX296702 dual core ARM Cortex A9 processor with Mali-400 GPU System Memory – 512 MB RAM Storage – 4GB flash + micro SD card Video Output – HDMI + AV (RCA) Audio Output – HDMI + Stereo audio (2x RCA) Connectivity – Ethernet and Wi-Fi USB – 2x USB 2.0 host ports Power Supply – 5V Considering the board is running Android 4.4, the specs are quite low end, however the developers claim to have […]

April 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Zidoo D1 Android DVB-T2 Set-top Box is Powered by ALI M3733 SoC

We’ve already seen Android set-top boxes powered by ALi M3733 dual core Cortex A9 processor with either DVB-T2 or DVB-S2 tuners. Zidoo, the maker of Zidoo X9 Android HDMI player and recorder, have unveiled a new model based on ALi processor dubbed Zidoo D1 that will come with a DVB-T2 tuner, and they’ve also released a video giving a better glimpse of the user interface used in ALi M3733 media players. The hardware specs are very similar to Uyesee L100T2: SoC – ALi M3733 dual core Cortex A9 processor with a dual core Mali-400 GPU System Memory – 512 MB or 1GB DDR3 Storage – 4 or 8 GB NAND flash Video & Audio Output – HDMI 1.4 up to 1080p + 3.5mm AV jack Tuner DVB-T and DVB-T2 with male and female IEC 169-24 connectors for loop and output. Frequency – 104-862MHz (VHF/UHF) Demodulation – QPSK, 16QAM, 64QAM for DVB-T; […]

April 27, 2015August 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

Wintel W8 Review – Dual Boot Android & Windows TV Box

Wintel W8 (aka Kingnovel K8) is an Intel Atom Z3735F mini PC inspired from Sunchip Wintel CX-W8 (the hardware is a little different), but instead of just running Windows 8.1, the device can dual boot Android 4.4 and Windows 8.1 with Bing. I’ve already taken pictures or torn down Wintel W8, so today, I’ll focus on the software part of the review, first checking dual boot functionality and Windows 8.1 briefly since it should be very similar to MeLE PCG03, before spending more time on Android as it’s my first Android Intel platform. Dual boot in Wintel W8 When you boot the device, you can select Android or Windows icon, with a 10 second timeout that will boot your latest choice. There’s no menu within Windows to start Android, and vice versa, so to dual boot you need to reboot first, and select the operating systems right after UEFI. The […]

April 26, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Variscite DART-MX6 is a Tiny SoM with Freescale i.MX6 SoC, Wi-Fi and Bluetooth

Variscite has unveiled what they claim to be the world’s smallest i.MX6 SoM with DART-MX6, a 50x20mm system-on-module featuring Freescale i.MX6 dual or quad processor, up to 1GB RAM, up to 32GB eMMC flash, as well as a wireless module for Wi-Fi and Bluetooth connectivity. Other small i.MX6 modules include TechNexion PICO-iMX6, or SolidRun microSoM found in Hummingbird board, and DART-MX6 has indeed the smallest area among the three. DART-MX6 specifications: SoC- Freescale i.MX6 dual or quad core Cortex A9 processor up to 800 MHz with Vivante GC2000 3D GPU System Memory – 512 to 1024 MB LPDDR2 (PoP) Storage – 4 to 32GB eMMC flash, 4KB I2C EEPROM Connectivity – Wi-Fi 802.11 a/b/g/n + MIMO, Bluetooth 4.0 BLE (TI WL183xMOD WiLink) Audio Codec – Texas Instruments TLV320AIC3106 Interfaces and I/Os via 2x 80-pin and 1x 50-pin board to board connectors Camera Interfaces – 1x CSI, 2x CPI Display – […]

April 24, 2015April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Tronsmart Draco H3 is a Low Cost HDMI TV Stick based on Allwinner H3 SoC

Allwinner H3 was unveiled as a quad core processor for 4K media players that would sell for less than $50, but so far devices like TVPP0030 are selling for an unattractive $80, but this may be about to change thanks to devices like Tronsmart Draco H3 HDMI TV stick that are expected to sell between $30 to $40 retail, possibly excluding shipping, and it would then compete against Amlogic S805 platforms such as MK808B Plus that only support 1080p video decoding and output. Preliminary specifications for Tronsmart Draco H3: SoC – Allwinner H3 quad core ARM Cortex A7 @ 1.5GHz with quad core Mali-400MP2 @ 600 MHz System Memory – 1 GB DDR3 Storage – 8 GB eMMC flash + micro SD slot Connectivity – 802.11 b/g/n Wi-Fi with external antenna, and Bluetooth 4.0 (AP6212 module) Video & Audio Output – HDMI 1.4 male connector up to 4K2K @ 30Hz, with […]