arm

Posted on by Stephen Vicinanza - No Comments on Arm Releases Pelion Connectivity Management 2.0 Platform with Greater Automation

Arm Releases Pelion Connectivity Management 2.0 Platform with Greater Automation

Arm has announced its latest version of Pelion IoT Platform, a no-upgrade needed platform Pelion Connectivity Management 2.0 a SaaS with an automation engine.  Previously, we reported on the Sigma Delta Technologies modular devkit that was designed to work with the cloud-based Arm Pelion 1.0 device management service through the Mbed OS, focused on IoT development. The Pelion Connectivity Management 2.0 adds a level of automation that the Pelion 1.0 didn’t have, but that the company felt the customer base in the IoT industry wanted. The new features expand on the Pelion platform, through the Mbed OS, which helped the platform expand through cloud-based management services. The loudest voices in the ever-expanding and transforming IoT industry have said that automation is the key to removing barriers that allow IoT to scale. Pelion 1.0 already offered a single, cloud-based connectivity solution for managing IoT devices. Pelion 2.0 allows IoT devices to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 27 Comments on Arm Cortex-A34 is a 64-bit Only Low-Power Core

Arm Cortex-A34 is a 64-bit Only Low-Power Core

Arm Cortex-A34

Arm previously announced Cortex-A35 64-bit & 32-bit lower-power CPU core, and later on Cortex-A32 32-bit only Armv8 CPU core with the usual press release, and blog posts providing details about their new offering. But this morning, I saw a tweet about Cortex-A34… https://twitter.com/never_released/status/1157107187375886337 Based on the twitter handle, I first assumed it was “never released” ;), and was just an internal part name at Arm. But the new Cortex-A34 was actually very discreetly outed last month when Arm announced Flexible Access to lower the barrier of entry by allowing IC designers to access all Arm IP in the program, and only pay for IP blocks they actually use in the final product. Nevertheless, the product page and developer documentation are now up – albeit with limited info for the latter -, so we have more details. Some of the highlights of Arm Cortex-A34 core include: Architecture – 64-Bit Armv8-A Multicore […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 22 Comments on Intel Agilex SoC FPGA Features Four Arm Cortex-A53 Cores

Intel Agilex SoC FPGA Features Four Arm Cortex-A53 Cores

Intel Agilex SoC FPGA

Intel announced their new Agilex FPGA family manufactured with a  10nm process earlier this April, but it only caught my eyes recently when I saw “Agilex SoC FPGA” listed in Linux 5.2 Arm’s changelog. The Intel SoC FPGA is there simply because it comes with four Arm Cortex-A53 cores. Three family have been announced so far, although the later is shown as coming soon: Intel Agilex F-Series FPGAs and SoCs – Transceiver support up to 58 Gbps, increased DSP capabilities, high system integration, and 2nd Gen Intel Hyperflex architecture for a wide range of applications in Data Center, Networking, and Edge. Option to integrate the quad-core Arm Cortex-A53 processor. Intel Agilex I-Series SoC FPGAs – Optimized for high performance processor interface and bandwidth intensive applications. Coherent attach to Intel Xeon processors with Compute Express Link, hardened PCIe Gen 5 support and transceiver support up to 112 Gbps. Intel Agilex M-Series […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on MYIR Announces Xilinx Zynq UltraScale+ MPSoC SoM and Development Board

MYIR Announces Xilinx Zynq UltraScale+ MPSoC SoM and Development Board

MYD-CZU3EG development board

MYIR Technology has been selling Xilinx Zynq-7000 FPGA + Arm systems-on-module since 2016, but the Chinese company has now announced new modules based on the more powerful Xilinx Zynq Ultrascale+ MPSoC with Arm Cortex-A53 cores, Arm Cortex-R5 cores, and Ultrascale FPGA fabric, as well as a corresponding development board. MYC-CZU3EG Zynq UltraScale+ MPSoC CPU Module CPU module specifications: MPSoC – Xilinx Zynq UltraScale+ XCZU3EG-1SFVC784E (ZU3EG, 784 Pin Package) MPSoC with quad-core Arm Cortex-A53 processor @ 1.2 GHz, dual-core Cortex-R5 processor @ 600 MHz, Arm Mali-400MP2 GPU, and 16nm FinFET+ FPGA fabric (154K logic cells, 7.6 Mb memory, 728 DSP slices) System Memory – 4GB DDR4 @ 2,400MHz Storage – 4GB eMMC Flash, 128MB QSPI Flash On-module chips Gigabit Ethernet PHY USB PHY Intel Power Module Clock Generator 2x Samtec 0.5mm pitch 160-pin high-speed headers bringing out Networking – Gigabit Ethernet USB – USB 2.0 interface 4x PS GTR transceivers along with […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Arm Techcon 2019 Schedule – Machine Learning, Security, Containers, and More

Arm Techcon 2019 Schedule – Machine Learning, Security, Containers, and More

Arm Techcon 2019

Arm TechCon will take place on October 8-10, 2019 at San Jose Convention Center to showcase new solutions from Arm and third-parties, and the company has now published the agenda/schedule for the event. There are many sessions and even if you’re not going to happen it’s always useful to checkout what will be discussed to learn more about what’s going on currently and what will be the focus in the near future for Arm development. Several sessions normally occur at the same time, so as usual I’ll make my own virtual schedule with the ones I find most relevant. Tuesday, October 8  09:00 – 09:50 – Open Source ML is rapidly advancing. How can you benefit? by Markus Levy, Director of AI and Machine Learning Technologies, NXP Over the last two years and still continuing, machine learning applications have benefited tremendously from the growing number of open source frameworks, tools, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linux 5.2 Release – Main Changes, Arm, MIPS & RISC-V Architectures

Linux 5.2 Release – Main Changes, Arm, MIPS & RISC-V Architectures

Linux 5.2 Changelog

Linus Torvalds announced the release of Linux 5.2 last Sunday: So I was somewhat pre-disposed towards making an rc8, simply because of my travels and being entirely off the internet for a few days last week, and with spotty internet for a few days before that [*]. But there really doesn’t seem to be any reason for another rc, since it’s been very quiet. Yes, I had a few pull requests since rc7, but they were all small, and I had many more that are for the upcoming merge window. Part of it may be due to the July 4th week, of course, but whatever – I’ll take the quiet week as a good sign. So despite a fairly late core revert, I don’t see any real reason for another week of rc, and so we have a v5.2 with the normal release timing. There’s no particular area that stands […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Debian 10 “Buster” Released

Debian 10 “Buster” Released

If you’re a recent owner of a Raspberry Pi 4 SBC, you should have had an early taste of Debian 10 “Buster”, since the Raspberry Pi Foundation decided to release their Raspbian “Buster” image before the actual release in order to lower software development costs. Debian developers have only just announced the release of Debian 10 “Buster”. The new version of Debian supports various desktop environments including Cinnamon 3.8, GNOME 3.30, KDE Plasma 5.14, LXDE .99.2, LXQt 0.14, MATE 1.20, and Xfce 4.12. Besides the official announcement Debian also posted tidbits on their Twitter feed, where we learn for example that “Debian 10 buster has 28,939 source packages with 11,610,055 source files”. Officially supported architectures for Debian 10 include i386 and amd64 for x86 targets, arm64, armel and armhf Arm architectures, as well as various other architectures including MIPS (mips64el, mipsel…), PowerPC (ppc64el), and IBM System z (s390x). One notable […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 59 Comments on Pre-production HoneyComb LX2K 16-Core Mini ITX Arm Workstation is up for pre-order for $550

Pre-production HoneyComb LX2K 16-Core Mini ITX Arm Workstation is up for pre-order for $550

HoneyComb LX2K Arm Workstation

A few months ago, we wrote that SolidRun was working on ClearFog ITX workstation with an NXP LX2160A 16-core Arm Cortex-A72 processor, support for up to 64GB RAM, and a motherboard following the mini-ITX form factor that would make it an ideal platform as an Arm developer platform. Since then the company split the project into two parts: the ClearFog CX LX2K mini-ITX board will focus on networking application, while HoneyComb LX2K has had some of the networking stripped to keep the cost in check for developers planning to use the mini-ITX board as an Arm workstation. Both boards use the exact same LX2160A COM Express module. HoneyComb LX2K specifications: COM Module – CEx7 LX2160A COM Express module with NXP LX2160A 16-core Arm Cortex A72 processor @ 2.2 GHz (2.0 GHz for pre-production developer board) System Memory – Up to 64GB DDR4 dual-channel memory up to 3200 Mpts via SO-DIMM […]

Exit mobile version