Linux News - Page 221 of 434 - CNX Software

January 27, 2018January 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Mycroft Mark II Smart Speaker / Voice Assistant Works with Open Source Software (Crowdfunding)

Smart speakers have gain a lot of traction over the last few years, but many of the solutions are based on Google Assistant or Amazon Alexa voice services, with both companies likely tracking your voice searches the same way they track your online searches to provide a “personalized experience” and sell you products or server ads that match your interests. If you don’t like being tracked that way, a solution is to use an open source voice assistant such as Mycroft, and install it on a Linux computer, Raspberry Pi 3 board, or Android device. The company also introduced Mark I reference hardware platform based on Raspberry Pi 2 in 2015, and while all those hardware options should be fine for the technically inclined, but not really suited to the typical end user, and AFAIK they all lack a microphone array for better hot word detection. So Mycroft has come […]

January 25, 2018January 25, 2018 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

MeLE A1000 TV Box is Back! Cost: $29.99 Shipped

MeLE A1000 is an Android TV box powered by Allwinner A10 Arm Cortex A8 processor that was launched in 2012 with Android 2.3, and was featured prominently on this blog, as arm-netbook then linux-sunxi community was working on porting Linux to the platform at that time. I discovered the device after the launch of the first Raspberry Pi board, and its subsequent unavailability due to extreme demand, and was looking for an alternative which became MeLE A1000, since there was an active around the box that included a real SATA port as a bonus. Why am I writing about this today? Because the TV box just showed up in GeekBuying new arrivals feed for $29.99. The device’s appearance has not changed, and the hardware specifications are the same too: SoC – Allwinner A10 Arm Cortex A8 processor with Mali-400 GPU System Memory – 512MB DDR3 RAM Storage – 4GB NAND […]

January 24, 2018January 24, 2018 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Mainline Linux on Amlogic S905/S905X/S912 SoCs – 2018 Status Update

BayLibre is working on mainline Linux for Amlogic SoC, and in February of last year, Neil Armstrong gave a presentation entitled “Mainline Linux on AmLogic SoCs” at the Embedded Linux Conference 2017. Neil has recently (actually yesterday) given another presentation about the status of mainline Linux on Amlogic processor at linux.conf.au 2018, so we have some updated information now. He goes through the whole history of upstreaming Linux for Amlogic SoCs, but I’ll provided summary of the new features, and if you have time you can watch the video (25 minutes) embed below, or the slides. Early last year, Linux 4.10 already supported general I/Os, USB host (for S905), Gigabit Ethernet, eMMC/SD/SDIO, PSCI for SMP, and SCPI for DVFS for Amlogic processor, and BayLibre was said to be working on HDMI display support, Mali (as external module), audio input/output, and high-speed eMMC modes. Based on the slide above, with Linux […]

January 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Pulurobot is a Low Cost Open Source Raspberry Pi based Load Carrying Autonomous Robot

Earlier today I wrote about FOSDEM 2018 schedule, and among the various talks I selected for my virtual schedule was “How to build an autonomous robot for less than 2K€”. Some excerpt from the abstract including a short description of the project, and its “open-sourceness”: PULUrobot solves the autonomous mobile robotics complexity issue without expensive parts, without compromise. By fearless integration and from-scratch design, our platform can do SLAM, avoid obstacles, feed itself, and carry payload over 100kg, for less than 2,000 EUR. Application ecosystem can be born around it, as we offer a ready-made Open Source (GPLv2) solution in a tightly coupled HW-SW codesign. So I decided to have a closer at this project, which can be used as a robot maid/helper of sort, and other applications. The robot was made by a brand new (July 2017) startup called Pulu Robotics Oy and based in Finland. They have three […]

January 23, 2018March 8, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

FOSDEM 2018 Open Source Developers Meeting Schedule

FOSDEM (Free and Open Source Software Developers’ European Meeting) occurs every year on the first week-end of February, where developers meet for two days discussing about open source software projects. FOSDEM 2018 will take place on February 3-4 this year with 652 speakers, 684 events, and 57 tracks, an increase over last year 608 speakers, 653 events, and 54 tracks. There will be 8 main tracks namely: Community, History, Miscellaneous, Performance, Python, Security and Encryption, Space, and Global Diversity CFP Day. There will also be 33 developer rooms, and since the full schedule is now available, I’ll make a virtual schedule mostly based on sessions from the Embedded, mobile, and automotive, Hardware Enablement, and Internet of Things devrooms. Saturday 3, 2018 09:50 – 10:15 – Turning On the Lights with Home Assistant and MQTT by Leon Anavi In this presentation you will learn the exact steps for using MQTT JSON […]

January 22, 2018October 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Pandora’s Box 5S Arcade Game Console – Teardown and Mini Review

Last year – and even in 2016 – , there was a fair amount of new retro gaming news, with products such a Nintendo SNES Classic Edition or GameShell Portable Retro console, as well as community supported firmware such as RetrOrangePi 4.0. GearBest asked me if I wanted to review something a little different: Pandora’s Box 5S (aka Pandora’s Key 5S) arcade game console with 999 games most (all?) designed for two players. This looked fun, and I was particularly interesting in checking out the hardware design, and hacking potential, e.g. if there could be a way to replace the board or firmware with your own. So in the review, I’ll focus mostly on the teardown, before shortly testing out the system and a few games. Pandora’s Box 5S Unboxing The device comes ins a large package (~70 x 24 x 16cm), so I’m surprised customs did not ask any […]

January 20, 2018January 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

QNAP Launches TS-128A & TS-228A Entry-Level NAS Powered by Realtek RTD1295 SoC

Realtek RTD1295 can be found in mid range to high-end 4K TV boxes that often include a SATA bay or interface, as well as an HDMI input port that supports PVR, PiP, and UDP broadcasting, with the devices normally running both Android and OpenWrt simultaneously respectively for multimedia apps, and storage/network functions. But last year, we also spotted QNAP & Synology working on entry-level NAS based on the processor, and the former has now launched the TS-x28A series with two models: TS-128A & TS-228A equipped with respectively one and two 3.5″ SATA bays. QNAP TS-128A & TS-228A specifications: SoC – Realtek RTD1295 quad-core Arm Cortex A53 processor @ up to 1.4GHz with hardware encryption acceleration engine System Memory – 1GB DDR4 (soldered) Storage 4GB eMMC flash for firmware Drive Bay TS-128A – 1x 3.5″ SATA 6Gbps TS-228A – 2x 3.5″ SATA 6Gbps Connectivity – Gigabit Ethernet Port (RJ45) USB – […]

January 18, 2018January 25, 2018 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

ODROID-HC2 Linux NAS System for 3.5″ Hard Drives Launched for $54

We knew it was coming, and Hardkernel has now launched an updated version of the ODROID-HC1, called ODROID-HC2 based on the same Samsung Exynos 5422 board, but instead supporting 3.5″ hard drives. The device can now be purchased for $54 plus shipping, but you may also consider adding some accessories like a 12V/2A power supply, and the top cover for the enclosure. [Update: Also listed on Ameridroid now]ODROID-HC2 specifications: SoC – Samsung Exynos 5422 octa-core processor with 4x ARM Cortex-A15 @ 2.0 GHz, 4x ARM Cortex-A7 @ 1.4GHz, and Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile System Memory – 2GB LPDDR3 RAM PoP @ 750 MHz Storage UHS-1 micro SD slot up to 128GB SATA interface via JMicron JMS578 USB 3.0 to SATA bridge chipset Case supports 2.5″ or 3.5″ drives up to 27mm thick Network Connectivity – 10/100/1000Mbps Ethernet (via […]