Linux News - Page 303 of 434 - CNX Software

November 5, 2015July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

EmbPower Provides Nvidia Tegra K1 RTX Modules, Carrier Boards, and Industrial Computers

EmbPower is a Taiwanese company that first focused on graphic cards, but has since then also developed other solutions requiring high GPU performance for military & aerospace applications as well as medical equipment. One of these products is TK1 Carrier Board with TK1 SoM powered by Nvidia Tegra K1 quad core processor, that can be encapsulated into TK1 PowerUnit industrial computer. There are actually two TK1 carrier boards: the larger V1.2 with more ports and features, and the smaller V2.0 that is used in TK1 PowerUnit Box, but they share most of the same (preliminary) specifications: SoC – Nvidia Tegra K1 quad core ARM Cotax-A15 processor with Nvidia Kepler 192-core GPU System Memory – 2GB DDR3 @ 933 MHz Storage – 16GB eMMC flash and SPI serial flash. V2.0 only: Adds micro SD slot; V1.2 only: Adds SD slot and SATA Connectivity – Gigabit Ethernet; optional 802.11ac and Bluetooth 4.0 […]

November 5, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 243 Comments

Giveaway Week – A80 Optimusboard Development Board

Together with Rockchip RK3288, Allwinner A80 is one of the most powerful Chinese ARM processors for mini PCs or development board, and today I’m starting a giveaway for A80 OptimusBoard development board based on Allwinner octa core big.LITTLE processor. When I got the board last year, it was indeed powerful as shown in benchmarks. But unfortunately after Allwinner provided me with a new firmware supposed to fix some NTFS write performance issues, I quickly discovered it also had some stability issues whose reasons were not clear, and Merrii Technology support is not very good to say the least, at least for hobbyists, and even now there’s no operating system for download on the board page. Luckily PcDuino Arches (previously known as PCDuino8) is basically the same, and you can download some Lubuntu & Android images on Linksprite website instead. The firmware has not been updated since 2014 however. To enter […]

November 4, 2015November 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Wind River Introduces Free Cloud-based Operating Systems for IoT Applications

After Google Brillo operating system was officially launched last week, another company has announced free operating systems for IoT. What’s peculiar is that the company is Wind River a vendor of commercial operating systems whose typical business model is to sell licenses for their operating systems and fees for their development services. Nevertheless, the company has now introduced Wind River Rocket real-time operating system, and Wind River Pulsar Linux operating system. Both OSes will interface with the company’s Helix Cloud software-as-a-service (SaaS) products, which is probably how the company intends to monetize their work, on top of customization services. Wind River Helix App Cloud is currently made of three products: Helix App Cloud cloud-based development environment for building IoT applications Helix Lab Cloud cloud-based virtual hardware lab for simulating and testing IoT devices and complex systems. Helix Device Cloud cloud-based platform for managing deployed IoT devices and their data. Some […]

November 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Manifold mini PC Powered by Nvidia Tegra K1 Processor is Designed for Drones

DJI is known for their high-end drones such as Phantom 3 quadcopter, but the company has now launched Manifold mini PC powered by Nvidia Tegra K1 quad core Cortex A15 processor and running Ubuntu 14.04 in order to allow developers run their own applications performing complex computing tasks and advanced image processing “on the fly”. DJI Manifold specifications: SoC – Nvidia Tegra K1 quad core Cortex-A15 processor @ up to 2.2 GHz with 192-core Kepler GPU System Memory – 2GB DDR3L Storage – 16GB eMMC 4.51 flash, micro SD slot Video Output – mini HDMI port Audio I/O – mini HDMI, combo audio jack for microphone and headphone Connectivity – Gigabit Ethernet port USB – 2x USB 3.0 ports, 2x USB 2.0 host ports, 1x micro USB port (supports Force Recovery mode and Host mode) , and a non-standard USB 2.0 interface with the drone. Camera – Camera In and […]

November 4, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 4.3 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.3 last week-end: So it *felt* like the last week of the rc series was busy, to the point where I got a bit worried about the release. But doing the actual numbers shows that that really was just my subjective feeling, probably due to the kernel summit and travel back home from Korea. It wasn’t actually a particularly busy week, it’s just that the pull requests were more noticeable in the last couple of days. We had a network update and a late fix for a x86 vm86 mode bug introduced by the vm86 cleanups, but other than that it’s just a collection of various small one-liners all over. Ok, the vm86 mode thing was a one-liner too, it was just slightly more nerve-wracking because it looked scarier than it was before people (Andy) figured out what was going on. The changes from rc7 […]

November 3, 2015November 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 232 Comments

Giveaway Week – ARNU Box Mach Q Pure Linux Media Player

The second device for this giveaway week is ARNU Box Mach Q TV box that runs Kodi 15.2 on an Amlogic S805 quad core processor with 1GB RAM and 8GB flash, the little brother of ARNU Box Mach 10 powered by the more powerful Amlogic S812 processor. Due to lack of time I did not review ARNU Box Mach Q, but I did review ARNU Box Mach 10, which is loaded with a similar firmware based on Linux based EmBER OS. Video playback was very good with Kodi 15.2 with automatic frame rate switching support, working audio pass-through via S/PDIF, but HDMI audio pass-through did not work with my AV receiver. Since it’s the same firmware base, I fully expect the same good video experience on ARNU Box Mach Q minus support for 4K videos. You can find more pictures on ARNU Box Mach Q unboxing and teardown post. To […]

November 2, 2015November 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Graperain G6818 IBOX Board is Powered by Samsung S5P6818 Octa-core Cortex A53 Processor

Shortly after writing about NanoPi2 development board based on Samsung S5P4418 processor, I checked some other more featured solutions based on the same processor, but made by competitors such as Graperain G4418 IBOX Card Computer or ARMBest Core4418 module. Whiel browsing Shenzhen Graperain Technology website, I discovered another processor by Samsung with S5P6818 octa core Cortex A53 processor found in their G6818 IBOX single board computer. Board specifications: SoC – Samsung S5P6818 octa-core ARM Cortex A53 processor @ 1.4 to 1.6 GHz with Mali-400MP 3D GPU System Memory – 2GB DDR3 up to 800MHz (1GB optional) Storage – 8GB eMMC Flash (16GB optional) + 2x micro SD slot Video Output / Display I/F – micro HDMI and VGA connectors; LCD (RGB), MIPI DSI and LVDS interfaces; Audio – micro HDMI, headphone jack, speaker header; Connectivity – Gigabit Ethernet (RTL8211E), Wifi and Bluetooth 4.0 (Realtek RTL8723BU module) USB – 2x USB 2.0 […]

October 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Razberry Board and UZB Dongle Add Z-Wave (Plus) to Raspberry Pi Boards

Z-Wave is one of the low power wireless communication protocols used for automation, and supported, for example, by gateways such as Samsung SmartThings Hub or Vera3. Z-Wave Plus is a certification program used to identify Z-wave 5th Generation hardware platform, allowing a greater range up to 45 meters, 50% improvement in battery life, 250% more bandwidth, and providing a standardized method for Over the Air firmware updates (OTA), among other things. Zwave.me, a startup registered in Switzerland, is specializing in Z-Wave products and solutions, and among their other products they’ve also designed Z-Wave hardware to turn the Raspberry Pi board and other compatible hardware into a Z-Wave gateway. RazBerry module will fit into the 26 or 40-pin header found on Raspberry Pi boards, and comes with the following specifications: Sigma Designs ZM5202 Z-Wave transceiver module Frequencies – Storage – 32KB SPI flash for network data CPU/MCU Interface – UART (Tx/Rx) […]