poe

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Advantech Edge AI Computer and PoE NVR Feature NVIDIA Jetson Xavier NX SoM

Advantech Edge AI Computer and PoE NVR Feature NVIDIA Jetson Xavier NX SoM

Advantech NVIDIA-Jetson-Xavier NX Edge AI Computer

Following the launch of NVIDIA Jetson Xavier NX SoM last year, we noted several third-party carrier boards and embedded PCs had been announced, and we expected more to come soon. Advantech has now unveiled two systems based on NVIDIA latest module with respectively  MIC-710AIX edge AI computer and MIC-710IVX NVR system equipped with eight PoE ports. MIC-710AIX edge AI computer Specifications: SoM – NVIDIA Jetson Xavier NX with 6-core NVIDIA Carmel ARM v8.2 64-bit CPU, 6MB L2 + 4MB L3 caches 384-core NVIDIA Volta GPU with 48 Tensor Cores 2x NVDLA deep learning accelerators System Memory – 8GB 128-bit LPDDR4x Storage – 16 GB eMMC 5.1 flash Storage – M.2 2280 Key-M socket for SSD; SD card socket Video Output – HDMI up to 3840×2160 @ 60 Hz Networking – 2x Gigabit Ethernet (RJ45) via Intel i210IT controller USB – 1x USB 3.0 host port, 1x USB 2.0 host port, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Banana Pi BPI-F2P Industrial Control Board Adds PoE, RS-232 and RS-485 Interfaces

Banana Pi BPI-F2P Industrial Control Board Adds PoE, RS-232 and RS-485 Interfaces

Banana Pi BPI-F2P

At the end of Last year, we covered Banana Pi BPI-F2S Industrial SBC powered by Sunplus SP7021 “Plus1” SoC with four Cortex-A7 core, an Arm A926 microprocessor, an 8051 core, as well as 128MB to 512MB built-in DDR3 RAM. The company has now unveiled Banana Pi BPI-F2P with the same processor and many of the same features, but with the addition of PoE support on one of the Fast Ethernet ports, as well as an RS-232 DB9 connector, and RS-485 terminal blocks. The expansion connector for an FPGA board found in BPI-F2S is however gone. Banana Pi BPI-F2P specifications: SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM. Storage – 8GB eMMC flash, microSD card slot Video Output – HDMI 1.4 output Camera I/F – MIPI CSI connector Connectivity – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on $38 Compute Module PoE Board Works with Raspberry Pi CM3/CM3+ Modules

$38 Compute Module PoE Board Works with Raspberry Pi CM3/CM3+ Modules

Compute Module PoE Board-Raspberry-Pi CM3 Compute Module

Raspberry Pi 3 Compute Module was first introduced in 2017 with CM3 and CM3L systems-on-module with or without 4GB eMMC flash for $25 and up before the company launched an update earlier this year with CM3+ modules equipped with a slightly faster processor and up to 32GB eMMC flash for $25 to $40. If you wanted to evaluate the solution for your project you’d have to spend well over $100 for either the official development kit or third-party solutions such as balenaFin which may not support all features of the modules out of the box. We previously wrote about Waveshare Compute Module IO Board Plus similar to the official devkit and going for $50 without the actual module. The company has now designed a more compact board that also supports Ethernet and PoE out of the box selling for just $37.99 plus shipping on Seeed Studio or Waveshare not including […]

Posted on by Stephen Vicinanza - No Comments on Apollo Lake based AAEON VPC-3350S Fanless Industrial In-vehicle NVR Comes with 4 PoE Ports

Apollo Lake based AAEON VPC-3350S Fanless Industrial In-vehicle NVR Comes with 4 PoE Ports

AAEON NVR VPC-3350S Industrial In-Vehicle  The AAEON fanless industrial network video recorder has joined the ranks of such NVR’s as the Solidrun Clearfog GTR A385, which was reported just recently as hitting the market. AAEON VPC-3350S is an in-vehicle industrial NVR that is aimed at mobile AI and IoT in areas such as license plate recognition. Processor Options The VPC-3350S is equipped with an Intel Atom x5-E3940 (formerly known as Apollo Lake) processor that comes standard. There are also options for the Pentium N4200 and the Atom x7-E3950. Configurations The units come in a variety of versions, with industrial, in-vehicle and customizable AI module, running the Intel Movidius Myriad X SoC. Offering more options than any other mobile NVR. Industrial Option The more compact Industrial VPC-3350S offers an I/O complement meant for more machine vision applications, such as license plate recognition. In-Vehicle Option The In-Vehicle option allows for fast set-up […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on SolidRun ClearFog GTR A385 NVR Platforms Feature Up to 8 Gigabit Ethernet PoE Ports

SolidRun ClearFog GTR A385 NVR Platforms Feature Up to 8 Gigabit Ethernet PoE Ports

SolidRun ClearFog GTR A385 NVR

A Networking Video Recorder (NVR) is designed to record and playback videos from multiple IP cameras usually connected over Ethernet, and in many cases powered over Ethernet (PoE). The main purpose is for security applications allowing caretakers to monitor multiple cameras at the same time on a mosaic screen. There are plenty of turnkey NVR solutions on the market, but SoliRun, an embedded systems company known for its modules and single board computers, recently introduced the ClearFog GTR A385 family that supports up to eight PoE/PoE+ Gigabit Ethernet Ports. The ClearFog GTR A385 family currently includes two modules with GTR S4 supporting up to four cameras, and GTR L8 up to eight cameras. Specifications: SoC – Marvell ARMADA A385 dual-core Armv7 (Cortex A9 class) up to 1.3Ghz System Memory – Up to 2GB on-board DDR3L Storage – 8GB eMMC flash (default),  2x 7 pin SATA (optional replacement for 2 x […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Gateworks GW5913 Compact NXP i.MX 6 SBC Supports PoE, GPS and 4G LTE Cellular Connectivity

Gateworks GW5913 Compact NXP i.MX 6 SBC Supports PoE, GPS and 4G LTE Cellular Connectivity

Gateworks has announced a new Ventana SBC similar to their GW5530 board with 4G LTE connectivity, as GW5913 single board computer follows the same factor, and supports 4G LTE connectivity via mPCIe cards, but it replaces the microSIM card slot by a nanoSIM card socket, and adds a Gigabit Ethernet port with 802.11at PoE support. Gateworks GW5913 specifications: SoC – NXP i.MX 6Dual dual-core Arm Cortex-A9 processor @ 800MHz System Memory – 512MB DDR3-800 SDRAM Storage – 256MB Flash, serial configuration EEPROM Connectivity Gigabit Ethernet with PoE support Optional 4G LTE via high-power (up to 8W) Gen2 Mini-PCIe socket with USB 2.0 and nanoSIM socket Optional u-blox GPS Receiver with MMCX or U.FL Antenna Connector Expansion Connector – USB, UART, I2C, DAC, DIO Misc – Real-Time Clock with battery backup, voltage and temperature monitor, programmable watchdog timer Power Supply – 8 to 60VDC input voltage range via 2-pin power connector […]

Posted on by Ayo Ayibiowu - 6 Comments on N-Fuse Launches Raspberry Pi 3B+ LoRaWAN Gateway with PoE Support

N-Fuse Launches Raspberry Pi 3B+ LoRaWAN Gateway with PoE Support

PoE enabled Raspberry Pi 3B+ based LoRaWAN™ Gateway

Raspberry Pi is everywhere, and this small size single-board computer has reshaped technology and STEM education. The launch of the recent Raspberry Pi 4 is evident in the success and continuous growth. The Raspberry Pi 3B+ has seen so much success in several maker’s projects, while not the most powerful SBC in the market, but undoubtedly one of the most popular. I once put together an AI-powered mobile robot using just a Raspberry Pi 3B+, an RPLidar A2, and Raspberry Camera which was way capable of so many things. Another exciting Raspberry Pi end product is the “PoE enabled Raspberry Pi 3B+ based LoRaWAN Gateway” from n-fuse. The PoE enabled Raspberry Pi 3B+ based LoRaWAN Gateway as called by n-fuse is a LoRaWAN gateway based on the Raspberry Pi 3B+, the LRWCCx-MPCIE Concentrator, and the SBCPoE RPI Hat. It supports both the Europe 868Mhz and America 915Mhz frequency (you have […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on 3 Ways to Power Devices with PoE: Wall Plug, Multi-port Injectors, and Injector/Splitter Cables

3 Ways to Power Devices with PoE: Wall Plug, Multi-port Injectors, and Injector/Splitter Cables

4-port poe injector

I regularly browse new arrivals feeds of popular websites to look out for interesting products, and I’ve noticed Banggood has several inexpensive PoE plugs and injectors going for around $6, which is quite cheaper than I would have expected. Apart from MatchX LoRaWAN gateway, I’ve never really used PoE to power devices, but I may soon have another look on Raspberry Pi 4 board with a third-party PoE HAT. PoE is mostly interesting if you need to run long cables to your boards or IP cameras since using a single Ethernet cable for data and power saves on cabling. 24V/48V PoE Plugs for the European market Banggood had three PoE plugs with prongs made for the European market: 48V/0.5A (24W) PoE Wall Plug 12V/1A (12W) PoE Wall Plug 24V/1A (24W) POE Wall Plug All three plugs are visually identical with a LAN port to connect to your router, and a […]