Raspberry Pi News - Page 100 of 151 - CNX Software

November 14, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Giveaway Week Winners – November 2018

We just had a week of fun on CNX Software with our yearly “Giveaway Week” activity where 7 prizes – from development boards to Raspberry Pi add-on boards or solar chargers – were randomly given away to people who entered by leaving a comment. The winners are in, with Asia starting strong, but Europe quickly taking the lead, and the US ending up the giveaway with a great (again) finish. Here’s the full list of winners: Videostrong VS-RD-RK3399 development board – Việt trần, VIETNAM CHOETECH Solar Charger – Erki, ESTONIA ESP32-LyraTD-MSC audio mic HDK – Ron, The Netherlands ROC-RK3328-CC development board – Dainis, LATVIA (a second time winner having previously won during Giveaway Week 2016) ThaiEasyElec 3G GPS Raspberry Pi Hat – zmlopez, SPAIN ANAVI Infrared and RGB strip pHAT – Joe, USA NanoPC-T4 development board – Jeffrey, USA I’ve just send all 7 packages earlier this afternoon. Hopefully, the […]

November 10, 2018November 12, 2018 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Giveaway Week – ANAVI Infrared pHat + Light pHat Starter Kit

Leon ANAVI works as a software engineer, but designs some open source hardware boards as a hobby, and usually sends me his creations for review. That means I have a bunch of his products, and today I’ll be giving away ANAVI Light pHat Starter Kit, and ANAVI Infrared pHat. The light sensor in the kit above will not be included, since I have no idea where it is… The winner still get the board and RGB LED string, and a few stickers. After connecting to a Raspberry Pi board and adding a 12V power supply, you’ll be able to control the LED as I did in “Getting Started with ANAVI Light pHat Starter Kit with RGB LED Strip, Light Sensor“. ANAVI Infrared pHat will also be part of the winning package, and you may consider reading the instructions showing how to control an air conditioner with a Raspberry Pi board. […]

November 9, 2018November 11, 2018 by Jean-Luc Aufranc (CNXSoft) - 76 Comments

Giveaway Week – ThaiEasyElec 3G Raspberry Pi HAT

3G-GPS-Tracker-Raspberry-Pi-Board-Configuration

You’ll need a 40-pin Raspberry Pi board for this giveaway. Quectel UC20 based ThaiEasyElec 3G Raspberry Pi HAT adds 3G / 2G connectivity to the popular development board. I”l send the board with the full kit include GPS/GLONASS antenna, cellular antenna, headers and spacers. I explained how to use the board in “How to Use 3G and GPS on Raspberry Pi” post, and I found that it was pretty easy working with GPS and 3G using Hologram SIM card by following the instructions provided by ThaiEasyElec. I could also find alternative connection method for this type of board on the Internet. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per contest. I will filter out entries with the same IP and/or email address. Contests are open for 48 hours starting at 10am (Bangkok time) every day. Comments will be closed after […]

November 8, 2018October 3, 2019 by Jean-Luc Aufranc (CNXSoft) - 71 Comments

Rock Pi 4 Raspberry Pi Compatible RK3399 Board to Sell for $39 and Up

The long awaited RPi 4 is almost finally here! Except we’re not talking about Raspberry Pi 4, but Rock Pi 4 designed by Radxa team, back after three years following the launch of Radxa Rock 2 Square, with the new SBC just unveiled by Tom Cubie, Radxa founder. Rock Pi 4 single board computer is powered by a Rockchip RK3399 hexa-core processor coupled with 1 to 4GB RAM, and following Raspberry Pi 3 and ASUS Tinker board form factor. There will be two variants with Rock Pi 4 Model A and Model B sharing most of the same specifications: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 1.8 GHz, 4x Cortex-A53 @ up to 1.4 GHz, a Mali-T864 GPU with support OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC, and a VPU with 4K VP9 and 4K 10-bit H265/H264 decoding System Memory – 1, 2 […]

October 20, 2018October 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Geniatech XPI-S905X Board Leverages Raspberry Pi 3 Form Factor

Geniatech is well known in the media player industry for their Amlogic based TV boxes, but in recent years, they’ve also launched some development board from other silicon vendors such as Qualcomm with Developer Board IV and Developer Board 8 powered by respectively Snapdragon 410E and 820E. The company has now launched the XPI family of single board computers that will allow closely follow Raspberry Pi 3 form factor while offering better performance and features. Geniatech will start with XPI-S905X board powered by an Amlogic S905X quad core Cortex A53 processor @ 1.5 GHz with 4K HDR video playback and output capability. Geniatech XPI-S905X board preliminary specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 processor @ up to 1.5 GHz (but they claim 1.6 to 2.0 GHz max…) with penta core ARM Mali-450MP GPU, and Amlogic Video Engine 10 System Memory – 1GB or 2GB (default) DDR3 RAM Storage […]

October 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

Raspberry Pi TV HAT Adds a DVB-T2 Tuner to Raspberry Pi Boards

The Raspberry Pi foundation has just launched another official HAT for their maker boards with the Raspberry Pi TV HAT based on Raspberry Pi Zero form factor, and is equipped a DVB-T2/T tuner in order to convert your board into a Linux based digital TV receiver and recorder. Raspberry Pi TV HAT specifications: Sony CXD2880 TV tuner Supported TV standards DVB-T2 (1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz channel bandwidth DVB-T (5MHz, 6MHz, 7MHz, 8MHz channel bandwidth) Reception frequency: VHF III, UHF IV, UHF V RF coaxial input for antenna connection RPi Interface – 40-pin RPi header Dimensions – 65 x 30 mm (half-size HAT) Operating temperature – 0–50°C The Raspberry Pi TV HAT is also known as the Raspberry Pi DVB TV μHAT based on the markings on the board’s silkscreen. The add-on boards follows a new HAT specification called the “half-size HAT” matching Raspberry Pi Zero board’s dimensions. Instructions to use […]

October 11, 2018April 13, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Pi Supply IoT LoRa Boards are made for Raspberry Pi & BBC Micro:bit Boards (Crowdfunding)

We’ve already covered plenty of LoRa boards or solutions designed for nodes or gateways such as TTGO T-Beam ESP32 + LoRa board, RAK Wireless RAK811 GPS Lora tracker board, MatchX Matchbox LoRa gateway, and many others,, but Pi Supply offers yet more options with LoRa node and gateway add-on boards designed to work with Raspberry Pi, Arduino, and BBC Micro:bit boards. Pi Supply LoRa Gateway HAT for Raspberry Pi The IoT LoRa Gateway HAT is based on RAK Wireless RAK833 mPCIe LoRa gateway concentrator module and connects to Raspberry Pi 3 B/B+ board via the 40-pin header. There are two hardware version using 868 MHz or 915 MHz frequencies, but as we’ve seen in previous reviews those are configurable for other frequencies such as AS923 or IN865. Pi Supply IoT LoRa Node pHAT for Raspberry Pi LoRa Node pHAT is designed for node specifically, and with a smaller form factor […]

October 3, 2018October 9, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Silicon Labs Releases Z-Wave Public SDK, Raspberry Pi 3 Image

Z-Wave is a wireless communication protocol initially developed by Zensys, before being purchased by Sigma Designs which provided Z-Wave compliant chips, and this year Silicon Labs purchased Z-Wave from Sigma Designs, Z-Wave is fairly popular in the US, and the Z-Wave alliance has certified around 2,400 products so far. However, we seldom hear about hobbyist projects featuring Z-Wave because the wireless protocol is proprietary, documentation was not available publicly, and you’d also need a few thousands dollars to get started: $4,000 a year to be a Z-Wave Alliance member, $2,500 for certification, and the development kit sells for about $2,000… But in 2016, things improved with Sigma Designs releasing Z-Wave Application Layer specifications publicly, as well as Z-Wave over IP (Z/IP), Z-Ware Middleware, and the Z-Wave S2 Security Specification. But you still needed to acquire the Z-Wave SDK and obtain access to the Z-Wave Technical Support website and the Z-Wave […]