Reviews - Page 78 of 131 - CNX Software

June 22, 2017 by Steven - 5 Comments

THL Box 1 Pro TV Box Review – Part 1: Unboxing and Teardown

Today we will be taking a look at the THL Box1 Pro box. We will take this is two parts, first being the unboxing and teardown then software and performance. Let’s start with the unit’s specs. THL Box 1 Pro TV Box specifications CPU – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.51GHz GPU – Penta-core Mali-450MP GPU @ 750 MHz Memory – 2GB DDR3 Storage – 16GB eMMC flash + micro SD card slot (up to 32GB) Video Output – HDMI 2.0 up to 4K @ 60 fps, AV port Audio – HDMI, AV port (stereo audio) Video Codecs – VP9 4K @60fps, 10-bit H.265 4K @ 60 fps, H.264 4K @ 30 fps and more Connectivity – 10/100M Ethernet, 802.11 b/g/n/ac Dual Band Wi-Fi, and Bluetooth 4.0 Interfaces – HDMI port, RJ45 port (100Mbps Ethernet), 2x USB Host, micro SD Card Slot, AV Out, DC jack […]

June 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Mini Review of Nextion Enhanced NX8048K070 7″ Display with Enclosure for HMI Applications

I reviewed some Nextion touchscreen a while ago. Those were 2.4″ and 5″ serial TFT displays with optional resistive touch support that could be used in standalone mode, or connected to an MCU board over UART to control external hardware. The user interface could be designed and emulated in Windows based Nextion Editor program before uploading it to the display via UART or micro SD card. ITEAD Studio has recently launched Nextion Enhanced NX8048K070 family of 7″ displays with resistive or capacitive touch panels, and support for GPIOs. The company sent me the capacitive model with enclosure for evaluation, so I’ll have a quick look at the hardware and Nextion Editor in this mini review. Nextion Enhanced NX8048K070_011C Unboxing I received it in a package from “ITEAD intelligent solutions” with basic description with Model: NX8048L070_011C with enclosure Outside dimensions : 275 x 170 x 50 mm (That’s the package dimensions) […]

June 20, 2017June 20, 2017 by Karl Johnson - No Comments

Raiscube R2 (Prusa I3 Clone) 3D Printer Review – Part 2: 3D Print Samples, E3D Clone Installation, Tips & Tricks

Karl here with part 2 Exploring Raiscube R2. That is the official name by Raiscube. Gonna look at some more prints. Some mistakes I made in first part and some simple mods. Maybe not so much mistakes but an oversight. Oversight / Mistake So in the first part of Raiscube Prusa i3 review, I mentioned there were not very good instructions, and they sent a blank SD card with the kit. I was wrong. On first inspection, it looked like a factory sealed SD card but it is not. It is an 8 GB card with videos, instructions, pictures, parts list, STL, and gcode files as well as an old version of Cura. Not blank at all with about 1.5 GB of files. It didn’t include settings but if you install the latest Cura, it just takes a little tweaking to print well. Official specs from SD card Brand RAISCUBE […]

June 18, 2017June 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 81 Comments

NanoPi NEO NAS Kit Review – Assembly, OpenMediaVault Installation & Setup, and Benchmarks

NAS Dock v1.2 for Nano Pi NEO / NEO 2 is, as the name implies, a complete mini NAS kit for 2.5″ drive for NanoPi NEO or NEO 2 board. The NEO 2 board is strongly recommended, since it’s not much more expensive, but should deliver much better results due to its Gigabit Ethernet interface. I’ve received two of those kits together with several other boards & accessories from FriendlyELEC, and today I’ll show how to assemble the kit, configure OpenMediaVault, and run some benchmarks. NAS Kit V1.2 Assembly with NanoPi NEO 2 Board The only extra tool you’ll need is a screwdriver, and potentially a soldering iron as we’ll see further below. The metal box is stuff wih accessories so the first thing is to open one or two sides to take out the content. We have the mainboard, NanoPi NEO back plate, NanoPi NEO 2 back plater, a […]

June 12, 2017August 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

HiMedia Q30 (Hisilicon Hi3798MV200) Android TV Box Review – Part 1: Unboxing and Teardown

I’ve often read praises about HiMedia TV boxes in the comments section of this blog, but so far, I had never tested any of their products. This is about to change, since the company has sent me their latest HiMedia Q30 TV box running Android 7.0 on Hisilicon Hi3798MV200 processor, a cost-down version of Hi3798CV200 processor with the same CPU,a lower-end Mali-T450 GPU, about the same media capabilities, and less I/Os. I’ll start the review by checking out the TV box and accessories, as well as the PCBA, before reporting the experience with Android 7.0 firmware in several weeks. HiMedia Q30 TV Box Unboxing I received the device is a package that read “HIMEDIA Q30” and “Android TV Box”, and shows some of the key features like 4K @ 60 fps, 10-bit HEVC, HDR and Kodi support. The devices ships with an IR remote control with IR learning function for […]

June 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Review of Wio Tracker with GPS, Bluetooth 3.0 and GSM Connectivity

Wio GPS – also called Wio Tracker – is an Arduino compatible board based on Microchip Atmel SAMD21 MCU with GPS, Bluetooth, GSM/GPRS connectivity, as well as several Grove connectors to connect sensors and modules for your IoT project. SeeedStudio sent me a sample for evaluation, so I’ve tested it, and reported my experience below by testing some of the Arduino sketches. Wio Tracker Unboxing All I got in the package was Wio GPS tracker v1.1 board. The top includes the Atmel MCU, an RGB LED, a microphone and 3.5mm AUX jack to make phone calls, a user and power button, a micro USB port for power and programming, a small 2-pin connector for a battery, and 6 Grove connectors for digital, serial, I2C and analog modules. The other side of the board comes with Quectel MC20 module that handles Bluetooth, GPS and GSM, a dual use micro SD card […]

June 9, 2017 by Ray - 11 Comments

Sunvell T95P Android Plug Computer mini Review

First of all, I have to say sorry for the delay for the review, but at the time I got this “beauty”, it would not power up, even though the blue light showed up out of the USB connector… I tried to recover a couple of times, no success at all… Getting a little upset, and tried after weeks of not thinking anymore… So I used an old trick, we all know, I guess. The freezer trick! I covered the Sunvell T95P in a soft linen towel, and put it in the freezer for around 3 hours. After that, it really worked like nothing happened before. There is also the old fascinating hairspray trick for “boards”… That could have been of help in some cases, but I couldn’t find a way to open this box without it being damaged for good. Here we go. Claimed Product details of T95P: 2G/8G […]

June 8, 2017July 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

MeLE PCG03 Apo Fanless Apollo Lake mini PC Review – Part 1: Unboxing and Teardown

You’ll now easily find mini PCs powered by Intel Apollo Lake processor, but many of them are actively cooled, and only support HDMI 1.4 output limited to 4K @ 30 Hz. MeLE PCG03 Apo, an update to the company’s PCG03 fanless mini PC, is powered by an Intel Celeron N3450 quad core processor, support HDMI 2.0 video output up to 4K @ 60 Hz, and is passively cooled. On top of that, it can also be upgraded with an M.2 SSD. The company has sent me a review for sample, and while I’ll focus on testing HDMI 2.0 support, audio pass-through, and whether the mini PC can handle high loads without CPU throttling in the second part of the review, I’ll first have a look at the hardware design today. MeLE PCG03 Apo Unboxing I’ve received the device in the usual black retail package showing the key features with 4K […]