router News - Page 24 of 32 - CNX Software

December 26, 2017December 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

SATXTREM OTT Box & WiFi Router Combo Runs Android 7.1 on Amlogic S905X Processor

There are so many Amlogic S905X/S912 TV boxes on the market that offer the same features, I’ve long stopped reporting on all new models, unless they have very specific features, or are made by some of the most popular companies. SATXTREM OTT Box & WiFi Router appear to be a difference beast – as its name implies -, as it’;s both an Android 7.1 TV box, and an Android WiFi router thanks to three Ethernet ports. SATXTREM TV box & router specifications: SoC – Amlogic S905X quad core Cortex A53 processor @ up to 1.5 GHz with ARM Mali-450MP3 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC flash (Options: 16GB, 32GB, 64GB) + micro SD slot up to 32GB Video Output – HDMI 2.0a up to 4K @ 60 Hz, AV port (composite) Video Codecs – 4K 10-bit H.265 up to 60 fps, VP9 up to 60 fps, […]

December 12, 2017December 12, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Marvell 802.11ax WiFi Chips are Designed for Enterprise Gateways, Mainstream Routers, and Set-Top Boxes

High-Efficiency Wireless (HEW), better known as 802.11ax, is a new WiFi standard that is supposed to deliver up to 10 Gbps bandwidth over 2.4 and 5.0 GHz frequencies, and improve the average throughput per user by a factor of at least 4 times in dense environments. Several draft of the specifications have been voted on, but the latest 802.11ax timeline seems to indicate the final 802.11ax specifications will only be approved sometimes in 2019. This has not prevented companies to announce or unveil 802.11ax SoC or solutions based on the draft specifications, as we’ve seen in the past with NXP Layerscape LA1575 programmable WiSoC, Qualcomm gateway reference design, and Broadcom Max WiFi chips. Marvell has now joined the fray with their 802.11ax wireless portfolio. All Marvell 802.1ax WiSoCs support all using uplink & download OFDMA / MU-MIMO, 1024 QAM, off-channel spectrum scanning, dedicated in-service monitoring, and precision location. Three SKUs […]

November 30, 2017November 30, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

ZeroShell Firewall/Router Linux Distribution Works on x86 Hardware, Raspberry Pi 2/3, & (Some) Orange Pi Boards

We’ve just seen pfSense is now available for Arm via firewall appliances such as Netgate SG-3100, but AFAIK there’s no pfSense community Arm firmware images yet. Several Arm SoCs & boards are now supported by FreeBSD, so in theory pfSense could be ported to those, but the page on FreeBSD does not seem to have been updated for a while. If you want a firewall distributions with an easy-to-user web interface like pfSense, but that also works on cheaper Arm hardware, Linux based ZeroShell distribution could be worth a try, as beside working on Intel & AMD x86 platforms, the developers also provides images for Raspberry Pi 2 & 3 boards, and several Orange Pi boards, namely Orange Pi R1, Orange Pi Zero, Orange Pi PC, and Orange Pi Plus/Plus2. The latter is the only supported Arm board with Gigabit Ethernet. Some of ZeroShell features include: Load Balancing and Failover of […]

November 30, 2017December 1, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Netgate SG-3100 is an ARM based pfSense Firewall Appliance

pfSense software is a popular open source firewall distribution based on FreeBSD operating system that is entirely managed via a web interface. Up until recently, FreeBSD (see comments section) pfSense would only support x86-64 (Intel or AMD hardware). But progress has been made with pfSense (and FreeBSD) for ARM, and Netgate, the company behind pfSense, is now selling two ARM based firewall appliances with SG-1000 microFirewall powered by Texas Instruments AM3352 Cortex A8 SoC, and sine a little over of month, SG-3100 firewall appliance based on a more suitable Marvell dual core Cortex A9 processor. Netgate SG-3100 hardware specifications: Processor – Marvell ARMADA 38x 88F6820 dual core ARM Cortex-A9 @ 1.6 GHz with NEON SIMD and FPU System Memory – 2GB DDR4L Non ECC Storage – 8GB eMMC Flash Network Interfaces 2x Gigabit Ethernet configured as dual WAN or one WAN one LAN 4x ports Gigabit Marvell 88E6141 switch, uplinked […]

October 13, 2017October 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

UniElec U7621-06 MediaTek MT7621 Router Supports OpenWrt, Padavan, and PandoraBox Firmware

UniElec U7621-06 is a router / gateway based on Mediatek MT7621 dual core/Quad Thread processor, and offered either as a board only or complete system with optional WiFi and/or LTE PCIe modules. While the board is said to run OpenWrt or firmware based on Mediatek Linux SDK , the company also mentions the board runs Breed bootloader that can be used to upgrade the firmware through a web interface. UniElec claims the router supports alternative firmware such as Padavan or PandoraBox. UniElec U7621-06 specifications: SoC – Mediatek MT7621 dual-core, quad-thread MIPS1004K processor @ up to 880MHz System Memory – 256MB DDR3 (optional 512 MB) Storage – 16MB NOR Flash (optional 8/32/64MB), 1x SATA 3.0 port, 1x micro SD card slot Connectivity – 5x Gigabit Ports (4x LAN, 1x WAN) USB – 1x USB 3.0 port Expansion 2x “normal” mPCIe for 802.11ac or 802.11n WiFi module 1x mPCIe connector for LTE […]

August 26, 2017August 26, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Broadcom Introduces Three 802.11ax “Max WiFi” Chips: BCM43684, BCM43694 & BCM4375

We’ve already written about the new 802.11ax WiFi standard that promises up to 10 Gbps data rates, support for 2.4 & 5 GHz bands, up to 4x longer range, and better handling of high density scenarios. It appears 802.11ax we’ll be known as Max WiFi to the masses, and Broadcom has unveiled Max WiFi solutions for home and enterprise routers, as well as a smartphones. There are currently three Max WiFi solutions from Broadcom: BCM43684 & BCM43694 4×4 802.11ax chips, respectively optimized for residential and enterprise access points, share the same key features: Support for four streams of 802.11ax 4.8 Gbps PHY rate 160 MHz channel bandwidth 1024 QAM modulation Uplink & downlink OFDMA (Orthogonal Frequency Division Multiple Access) MU-MIMO ZeroWait DFS (Dynamic Frequency Selection) AirIQ interference identification Full compliance to IEEE and WFA 802.11ax specifications BCM4375 smartphone combo chip: Support for 2-streams of 802.11ax Bluetooth 5 including Low-Energy Long […]

August 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

A Look at Some USB 3.0 WiFi 802.11ac Adapters with Multiple High Gain Antennas

When last week I reviewed Rock64 board I noticed they sold a “USB 3.0 Dual Band 1200Mbps WIFI 802.11 a/b/g/n/ac (RTL8812AU) adapter” for $19.99. So far I had only seen USB dongles with internal antennas or a single external antenna, but in the case of development boards, which may be used as routers or gateways, it makes perfect sense to get such adapter for higher performance and longer range. The only problem is that it “ships together with ROCK64 fulfillment”, meaning you can’t purchase it separately if you already have some other board to use, so I went to look for alternatives. One of the first I’ve come across was COMFAST CF-926AC with the following specifications: Chipset – Mediatek MT7612U Interface – USB 3.0 rotatable port WiFi – Dual band 2T2R WiFi 802.11ac, 802.11a, 802.11b, 802.11g, 802.11n up to “1200” Mbps (867 Mbps @ 5.8 GHz + 300 Mbps @ 2.4 […]

June 1, 2017November 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

MediaTek MT7622 SoC with WiFi Network Accelerator Supports 4×4 802.11n WiFi & Bluetooth 5

MediaTek has launched a new ARM SoC for routers, home automation gateways, wireless audio and storage, with MT7622 equipped with a dual core ARM Cortex A53 processor, a dedicated network accelerator, 4×4 802.11n and Bluetooth 5 connectivity. Two models with be available: MT7622A with all features, and MT7622B with router features only, which probably mean no Bluetooth, and possibly less I/Os. MediaTek MT7622 specifications: Processor – Dual core ARM Cortex A53 @ up to 1.36 GHz Storage – eMMC and SDXC interfaces; storage accelerator (SATA 3.0/eSATA Gen2) Connectivity 802.11b/g/n WiFi @ 2.4GHz, 4T4R antenna; 802.11ac can be added through MT7615 SoC Bluetooth 5 Fast Ethernet Switch, RGMII and SGMII Network Accelerator – APT+HQoS, MediaTek Wi-Fi Warp Accelerator Audio – Audio Amplifier, I2S, TDM, S/PDIF USB – USB 2.0 host/device, USB 3.0 host Other Peripheral Interfaces – PCIe Gen 2.0, ADC, GPIO, I2C, IR, PMIC I/F, PWM, SPI, UART Misc – RTC The specs on the product […]