som News - Page 61 of 74 - CNX Software

November 10, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYIR Tech Introduces TI Sitara Cortex A9 MYC-C437X SoM and MYD-C437X Development Board

MYIR Tech previously launched Ricoboard, a low cost single board computer powered by Texas Instruments AM4379 ARM Cortex A9 processor. The company has now introduced a system-on-module based on Sitara AM437x processors, as well as a corresponding carrier board for industrial applications. MYIR Tech MYC-C437x Sitara AM437x System-on-Module MYC-C437x SoM specifications: SoC – Texas Instruments AM437x single core ARM Cortex A9 processor @ up to 1GHz (AM4376, AM4377, AM4378, AM4379) with PowerVR SGX530 GPU (for AM4378/AM4379) System Memory – 512MB DDR3 (256MB optional) Storage – 4GB eMMC Flash (reserved 256/512MB Nand Flash design), 16MB QSPI Flash (unpopulated by default), 32KB EEPROM Connectivity – Gigabit Ethernet PHY Peripherals and signals via 2x 100-pin board to board connectors (0.8mm pitch): 2x Gigabit Ethernet 2x USB 6x Serial ports, 2 x CAN 2x I2C, 2 x SPI 14x ADC (8 channels from ADC1 and 6 channels from ADC0) 3x SDIO 2x Camera interfaces JTAG […]

November 9, 2015November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

SolidRun ClearFog Pro and Base Router Boards Feature Marvell ARMADA 380/388 Processor

Last month, I wrote about Turris Omnia an upcoming open source hardware router board with 6 Gigbit Ethernet ports and an SFP cage powered by Marvell ARMADA 385 processor. SolidRun has now unveiled ClearFog Pro router board with similar features, but opting instead for either Marvell ARMADA 380 or 388 processor. The company will also soon launch or lower-end version called ClearFog Base with the less ports, but with the same system-on-module as ClearFog Pro: Processor – Marvell ARMADA 380 (88F6810) single core or 388 (88F6828) dual core ARMv7 processor (Cortex A9 class) @ up to 1.6 GHz with 1MB L2 cache, NEON and FPU System Memory – 256MB to 1GB 16-bit DDR3L (ARMADA 380) or 32-bit DDR3L (ARMADA 388) Storage Pro version – M.2 slot, 1x micro SD slot, 2x mSATA/mPCIE Base version – M.2 slot, 1x micro SD slot, 1x mSATA/mPCIE Connectivity Pro version – 6x switched Gigabit […]

November 5, 2015July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

EmbPower Provides Nvidia Tegra K1 RTX Modules, Carrier Boards, and Industrial Computers

EmbPower is a Taiwanese company that first focused on graphic cards, but has since then also developed other solutions requiring high GPU performance for military & aerospace applications as well as medical equipment. One of these products is TK1 Carrier Board with TK1 SoM powered by Nvidia Tegra K1 quad core processor, that can be encapsulated into TK1 PowerUnit industrial computer. There are actually two TK1 carrier boards: the larger V1.2 with more ports and features, and the smaller V2.0 that is used in TK1 PowerUnit Box, but they share most of the same (preliminary) specifications: SoC – Nvidia Tegra K1 quad core ARM Cotax-A15 processor with Nvidia Kepler 192-core GPU System Memory – 2GB DDR3 @ 933 MHz Storage – 16GB eMMC flash and SPI serial flash. V2.0 only: Adds micro SD slot; V1.2 only: Adds SD slot and SATA Connectivity – Gigabit Ethernet; optional 802.11ac and Bluetooth 4.0 […]

October 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Compulab Unveils CL-SOM-iMX6UL Freescale i.MX 6UltraLite System-On-Module and SBC-iMX6UL SBC

Compulab has launched a CL-SOM-iMX6UL system-on-module based on Freescale i.MX 6UltraLite ARM Cortex A7 processor with up to 1GB DDR3 and 32GB eMMC flash. The module can be coupled with SB-SOM-iMX6UL carrier board to form SBC-iMX6UL single board computer targeting industrial and embedded applications. CL-SOM-iMX6UL specifications: SoC – Freescale i.MX6 UltraLite Cortex-A7 processor @ 528MHz System Memory – Up to 1GB DDR3 Storage – Up to 32GB on-board eMMC, Up to 1GB on-board SLC NAND, SPI flash, I2C EEPROM Connectivity – Dual-band, dual-antenna 2×2 802.11a/b/g/n WiFi, Bluetooth 4.1 BLE (Ti WiLink 8), 10/100M Ethernet PHY (with optional bypass) Audio – WM8731 audio codec with stereo line-out, line-in, mic, S/PDIF input/output Other I/Os via 204-pin SODIMM edge connector Display Parallel 24-bit display interface up to 1366 x 768 Touchscreen 4/5/8-wire resistive touch-screen support Capacitive touch-screen support through SPI interface USB – 1x USB2.0 OTG + 4x USB2.0 host ports Up to […]

October 23, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Inforce Computing 6401 Micro SOM is a Qualcomm Snapdragon 600 System-on-Module

Inforce Computing announced their 6501 Micro SOM system-on-module based on Qualcomm Snapdragon 805 processor in Q2 2015, and the company informed me that they had just unveiled a lower power version based on Snapdragon 600 processor called 6401 Micro SOM, and still featuring WiFi, Bluetooth 4.0, and GPS connectivity on module. Inforce 6401 Micro SOM: SoC – Qualcomm Snapdragon 600 (APQ8064) quad core Krait processor up to 1.7 GHz with Adreno 320 GPU, and Hexagon DSP v4 up to 500MHz System Memory – 2GB PoP LPDDR2 @533Mhz (Optional 3GB) Storage – 4GB eMMC v4.4.1/v4.5, with options up to 64GB Connectivity – BT 4.0 , dual band 802.11n/ac Wi-Fi (QCA6234), and GPS (WGR7640) with WiFi and GPS antennas on carrier board Peripherals and I/O via two 100-pin SoM connectors: Video / Display – 1x HDMI, 2x MIPI-DSI (4-lane) & touch screen Audio 4x Line out, 3x Mic-in, 1x headphone out 8-channel […]

October 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Compulab Unveils Texas Instruments Sitara AM5718 / AM5728 SoM and Single Board Computer

After last week formal launch of Texas Instruments Sitara AM572x processor, and Beagleboard-X15 development board, Compulab has now introduced CL-SOM-AM57x System-on-Module based on TI Sitara AM5718 or AM5728 SoC, as well as the corresponding SBC-AM57x single board computer. Both target industrial automation and control systems, and network connectivity options also make them suitable for networking, communications and IoT applications. CL-SOM-AM57X module specifications: SoC – Texas Instruments Sitara AM5728 or AM5718 SoC with: Dual (AM5728) or single (AM5718) Cortex A15 processor @ up to 1.5 GHz Dual core PowerVR SGX544 3D GPU, Vivante GC320 2D GPU Two Cortex M4 cores @ 212 MHz Dual TMS320C66x DSP @ 700 MHz Video IVA-HD 1080p video sub-system Four 32-bit PRUs (Programmable Real-time Units) System Memory – 512MB to 4GB DDR3 Storage – 4 to 32GB on-board eMMC, 512MB to 1GB on-board SLC NAND Connectivity – On-board WiFi 802.11a/b/g/n + Bluetooth 4.1 BLE (TI WiLink […]

October 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

PicoZed SDR (Software Defined Radio) System-on-Module Supports 70 MHz to 6.0 GHz Frequency Bands

PicoZed SoM based on Xilinx Zynq-7000 series SoCs was introduced in 2014 by Avnet. The company has now introduced a new version specifically designed for software designed radios which combines Zynq-7035 SoC with Analog Devices AD9361 RF transceiver supporting 70 MHz to 6.0 GHz frequency bands. Target applications include portable agile wireless communications, P25 public safety Radio, point-to-point communication, femtocell & picocell base stations and portable instrumentation. PicoZed SDR SoM specifications: SoC – Xilinx Zynq XC7Z035-2L FBG676I AP SoC with a dual core Cortex A9 processor @ 800 MHz and Kintex-7 FPGA with 275K logic cells System Memory – 1GB DDR3L SDRAM Storage – 256Mb QSPI Flash, microSD Card Interface Network Connectivity – 10/100/1000 Ethernet PHY USB – USB 2.0 OTG ULPI PHY I/Os – 205+ User I/O + 4 GTX channels Radio Transceiver – Analog Devices AD9361-BBCZ integrated RF Agile Transceiver with: 2 × 2 RF transceiver with integrated […]

September 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Calao Systems SMC-NTEK1 is a SMARC System-on-Module Powered by Nvidia Tegra K1

Calao Systems has introduced a new system-on-module compliant with SGET SMARC specifications, and powered by Nvidia Tegra K1 quad core Cortex A15 processor, that targets embedded systems for vision, video, data analytic and high computing applications. Calao SMC-NTEK1-IXX module specifications: SoC – Nvidia Tegra K1 quad core Cortex A15 processor with a Kepler GPU System Memory – 2GB DDR3L Storage – 8 GB e-MMC, 8 MB SPI Flash, 1x EEPROM with unique S/N and MAC address Security – 1x Trusted Platform Module (TPM), 1x Crypto Authentication I/Os via MXM3 edge connector: Storage – SATA 3Gb/s, 1x SDIO Video Output – 1x LVDS, 1x HDMI Video Input / Camera – 2x CSI Audio I/F – 1x I2S, 1x S/PDIF Out Debugging – 1x JTAG Network connectivity – 1x Gigabit Ethernet USB – 2x USB 2.0 Host, 1x USB 2.0 OTG 1x PCIe x1 4x UART, 1x SPI, 3x I2C, 12x GPIO […]