CNX Software - Embedded Systems News

November 7, 2019November 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

HLK-7688A OpenWrt Development Board Comes with an Audio Jack

We first tested MediaTek MT7688 MIPS processor in Mediatek Labs’ LinkIt Smart 7688 / 7688 Duo hardware development kits running OpenWrt in 2015 with the boards having a focus on IoT applications. A year later, Widora NEO board launched with an audio jack for connected audio applications, but AFAIK it’s not available anymore. There’s now another OpenWrt audio board based on the processor with HLK-7688A board featuring Hi-Link HLK-7688A module which we previously found in MatchBox LoRaWAN gateway. HLK-7688A board specifications: Wireless Module – HLK-7688A based on MediaTek MT7688 MIPS24KEc processor @ 580 MHz, and equipped with 128MB RAM, 32MB flash Storage – MicroSD card slot Connectivity 802.11 b/g/n WiFi 4 up to 150 Mbps with u.FL antenna connector 10/100M Ethernet Audio – 3.5mm audio jack; 4-pin speaker header, WM8960 audio codec USB – 2x Micro USB ports one USB 2.0 port and one for debugging & power Expansion – […]

November 7, 2019November 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

NVIDIA Jetson Xavier NX SoM Delivers up to 21 TOPS for AI Workloads at the Edge

NVIDIA has just announced Jetson Xavier NX system-on-module, with the company claiming it is the “world’s smallest, most powerful AI supercomputer for robotic and embedded computing devices at the edge” with a 70x45mm “Jetson Nano” form factor, and delivering either up to 14 TOPS at 10 Watts or 21 TOPS at 15 Watts. The company expects the module to be used in small commercial robots, drones, intelligent high-resolution sensors for factory logistics and production lines, optical inspection, network video recorders, portable medical devices, and other industrial IoT systems. Jetson Xavier NX specifications: SoC – NVIDIA Xavier with 6-core NVIDIA Carmel ARM v8.2 64-bit CPU, 6MB L2 + 4MB L3 caches, and a 384-core NVIDIA Volta GPU with 48 Tensor Cores, 2x NVDLA deep learning accelerators delivering up to 21 TOPS at 15 Watts System Memory – 8 GB 128-bit LPDDR4x @ 51.2GB/s Storage – 16 GB eMMC 5.1 flash Video […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

November 7, 2019November 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 145 Comments

Giveaway Week – Maixduino Sipeed M1 RISC-V AI Kit

For the fourth day of Giveaway Week, I’ll give out a kit comprised of Maixduino a RISC-V development board with an AI accelerator in Arduino form factor, a camera, and a 2.4″ color LCD. I tested the Maixduino kit with MicroPython, but it can also be programmed with the Arduino IDE, or Kendryte SDK. It basically allows you to run low-power AI workloads at the edge, i.e. without access to the cloud, such as face detection. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per contest. I will filter out entries with the same IP and/or email address. Contests are open for 48 hours starting at 10 am (Bangkok time) every day. Comments will be closed after 48 hours. If comments are open, the contest is still going on. Winners will be selected with random.org and announced in the comments section […]

November 6, 2019February 15, 2024 by Ayo Ayibiowu - 4 Comments

DepthAI Brings AI plus Depth to the Raspberry Pi (Crowdfunding)

Edge computing on the Raspberry PI has been a bit of ups and downs, especially with everyone gearing for AI in everything. The Raspberry Pi, on its own, isn’t really capable of any reliable AI applications. Typical object detection on the Raspberry Pi would get you something around 1 – 2 fps depending on the nature of your model and this because all those processing is done on the CPU. To address this poor performance of AI applications on the Raspberry Pi, AI Accelerators came to the rescue. The Intel Neural Compute Stick 2 is one such accelerator capable of somewhere around 8 – 15 fps depending on your application. The NCS2, which is based on the Myriad X VPU technology, offers so much more than the compute stick delivers, and this is something that the team behind DepthAI has exploited to create a powerful AI module for edge computing […]

November 6, 2019 by Karl Johnson - 1 Comment

Quick Update for the AnyCubic Photon S Photon Workshop V2.1.17.RC1

Just last week I did the first part of the review of the Anycubic Photon S. One of the pain points of printing was the long workflow. Chitubox Prusa slicer Photon File Validator Photon Workshop First thing I have to decide is if the model needs to be hollowed to conserve resin. I load up the model in Chitubox and use the built-in tool to hollow the model. After the models hollowed and a drain hole is placed I export it to an STL and open with Prusa Slicer. In Prusa Slicer, I orient the model and use its auto-support feature and auto-orient feature. It is a roll of the dice if the orientation makes sense. I want all the supports to be on the back/bottom of the print. Little marks are left when removing the supports. I have found that Prusa Slicer has the best auto support feature. Then […]

November 6, 2019November 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

$1,000 Microsoft Surface Pro X Tablet is Powered by Microsoft SQ1 Arm Processor

Arm Windows 10 laptops, tablets, and 2-in-1 hybrids have been around for a couple of years all powered by Qualcomm Snapdragon processors so far. Now Microsoft is launching Surface Pro X Windows 10 tablet powered by its own Microsoft SQ1 Arm processor. It sells for $999 with 8GB RAM, 128GB storage, and a 13″ 2880 x 1920 x pixel touchscreen display in the default configuration, but you can also customize your order with up to 16GB RAM, 512GB SSD storage, optional keyboard and stylus for over $2,000. Microsoft Surface Pro X Specification Microsoft Surface Pro X specification: SoC – Microsoft SQ1 Arm processor @ 3.0 GHz with Adreno 685 GPU System Memory – 8GB or 16GB LPDDR4x RAM at 3733Mbps (option for 16GB) Storage – Removable 128, 256, or 512GB M.2 SSD Display – 13” PixelSense Display with 2880 x 1920 resolution (3:2 aspect ratio), 10 point multi-touch, 450 nits […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

November 6, 2019November 8, 2019 by Jean-Luc Aufranc (CNXSoft) - 191 Comments

Giveaway Week – MINIX NEO S1 USB-C Hub with 120GB built-in SSD

MINIX NEO S1 & S2 USB-C hubs come with either 120 or 240 GB SSD storage, as well as an HDMI output, 2x USB 3.0 ports, and a USB-C port for power. I reviewed MINIX NEO S2 in details with an SBC running Ubuntu 18.04, and plan to keep it for future reviews, but since I also received MINIX NEO S1, I’ll be given it away for free to one of my readers as part of Giveaway Week 2019. While the device is designed for Apple Macbook Air and Apple Macbook Pro, it should work with any computer or board with a USB-C port with DisplayPort Alternate mode provided you want to use the HDMI output port. An extra USB-C power supply is optional, but I’ve found out it’s mostly required if you’ve going to connect one or more USB 3.0 hard drive to the hub. This item is new, […]

November 6, 2019 by Stephen Vicinanza - No Comments

YABA is a Backplane Architecture Controller for Automation and IIoT (Crowdfunding)

Automation and IIoT Through YABA YABA is an acronym and a concept being developed. The acronym is Yet Another Backplane Architecture (YABA). The concept is to bridge the gap between PLC/PAC and open source hardware. The YABA Bridge to IoT YABA is designed to be a robust, open hardware controller that will be a simple but effective midpoint or bridge to the approach of modern industrial technologies in the automation and IoT sector, especially production lines in industrial settings. Where YABA is in Process The process is midstage right now, with a prototype coming. There is an IndieGoGo campaign, but it is at the development stage right at this moment. The developer has reported that the team is about two months out of a working prototype, which should put them an efficient schedule timeline. The project has the backplane, CPU, I/O boards at about 75% complete, and just working towards […]