CNX Software - Embedded Systems News

July 22, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Xiaomi Mi A2 Lite Android One Phone Now Up for Pre-order for $181.99 and up

Xiaomi Mi A2 Lite is the successor of Xiaomi Mi A1 smartphone, which will also run the latest Android 8 Oreo firmware, and receive regular firmware updates for at least 18 months since it’s part of Android One program. Mi A2 Lite phone is powered by the Qualcomm Snapdragon 625 processor coupled with 3 to 4GB RAM, and 32 to 64GB storage. It will officially be announced on July 24th together with its big brother Xiaomi Mi A2 powered by Snapdragon 660 processor and a larger 5.99″ display, but some companies are already taking pre-order with Banggood starting at $199.99, and GeekBuying offering it for $181.99 shipped and up.. Xiaomi Mi A2 Lite specifications: SoC – Qualcomm Snapdragon 625 octa core Arm Cortex A53 processor @ up to 2.0 GHz with Adreno 506 GPU System Memory – 3GB or 4GB RAM Storage – 32GB or 64GB RAM, micro SD card […]

July 21, 2018July 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

Pi-Zero-UpTime is an UPS for Raspberry Pi Boards and Clones

Since for a headless Raspberry Pi it makes no sense to use a large UPS (Uninterruptible Power Supply) to keep it running in case of power failure, I bought and tested a Raspberry Pi battery kit a couple of years ago. The kit included an acrylic case, a battery charging board, and LiPo battery and it worked most of the time as a UPS. “Most of the time” means the switch from mains to battery would not occur fast enough maybe 10% of the time (it depends on the load), so the Raspberry Pi board would reboot. The kit also did not include a GPIO / I2C interface to report the charge level of the battery, so you would not be able to safely power the board when the battery is almost fully depleted. In recent years, it’s become more and more difficult to get batteries shipped from overseas, so […]

July 20, 2018July 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Xiaomi Mi Box International Sold for $49.99 Shipped (Promo)

Xiaomi Mi Box (International) is one of the recommended TV boxes as it runs the official Android TV OS with support for Netflix and Amazon Prime HD/4K, and normally sells around $60. But Banggood currently has a promotion until July 24, 2018, where it offers the TV box for just $49.99 shipped. Stocks are limited to around 100 units for this promotion however. The device was released in 2016, so a little reminder of the specifications is in order: SoC – Amlogic S905X-H quad core ARM Cortex-A53 @ up to 1.5 GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 8GB eMMC flash Video Output – HDMI 2.0a up to 4K @ 60 Hz with HDCP 2.2 and CEC support Audio Output – HDMI, optical S/PDIF and 3.5mm audio jack Video Codecs – VP9 Profile-2 & H.265 MP-10 up to 4K @ 60 fps, […]

July 20, 2018July 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Firefly Baidu Face Recognition Kit Comes with Monocular, Binocular, or Structured Light Camera

Firefly AIO-3399J industrial board comprised of a Rockchip RK3399 SoM and a baseboard offering plenty of I/O & connectivity options has been bundled with various other accessories including a 10.1″ touchscreen display, and cameras to create a development platform for Baidu AI offline (aka “at the edge”) face recognition technology. The development kit is available in different variants with either a monocular camera, a binocular camera, or a structured-light camera. There’s also a deluxe kit with WiFi and a stand. Baidu Face Recognition Kit key specifications: SoC – Rockchip RK3399 hexa-core big.LITTLE processor with dual core ARM Cortex A72 up to 2.0 GHz and quad core Cortex A53 processor, ARM Mali-T860 MP4 GPU with OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL and DX 11 support System Memory – 2GB DDR3 RAM Storage – 16GB eMMC 5.1 flash, micro SD card slot Display – 10.1″ 1280×800 capacitive touch display Connectivity – […]

July 20, 2018July 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Three 5W Intel Amber Lake Processors Coming Soon: Core m3-8100Y, Core i5-8200Y, Core i7-8500Y

When I talk about low power Intel processors, I usually think about atom-based families like Bay Trail, Cherry Trail, Apollo Lake or Gemini Lake with 2W to 10W processors that delivers entry-level performance at a reasonable price. But Intel has also been selling more powerful Core-m processors with a similar power budget, but with much better performance, at the cost of a significantly higher price tag. The company is now prepping to launch a new family of such processor with Amber Lake Y-series (aka Amber Lake-Y) family. Three Amber Lake processors are expected to be officially announced very soon: Core m3-8100Y dual core/quad thread processor @ 1.1 GHz (base) / 3.4 GHz (turbo) Core i5-8200Y dual core/quad thread processor @ 1.3 GHz (base) / 3.9 GHz (turbo) Core i7-8500Y dual core/quad thread processor @ 1.5 GHz (base) / 4.2 GHz (turbo) All three processors are manufactured with a 14 nm […]

July 20, 2018July 20, 2018 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Build an ESP8266 IR Remote Control with LOLIN IR Controller Shield for D1 Mini Board

Infrared remote control are still widely with TVs, set-top boxes, air conditioners, and all other sort of appliances with the end result of having many remote control around the house. If you want to cut on the number of remote controls, there are several solutions: Get a smartphone with a Built-in IR transmitter like Xiaomi Mi A1. Add an IR transmitter to your smartphones’s headphone jack using ZazaRemote or USB type C port with ROCK USB type C IR transmitter. Get a WiFi IR blaster in order to control devices remotely, or maybe buy several try control any IR devices from anywhere DIY your own solution for more flexibility, for example using ANAVI Infrared pHAT and a Raspberry Pi board. The smartphone solutions (1 & 2) works as long as you are in the room, but the WiFI IR blaster allows you to control devices even if you are not […]

July 19, 2018December 30, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Faytech 15″ to 17″ Capacitive Touch PCs Ship with Ubuntu 16.04

Although many can support Ubuntu or other Linux distributions, most Intel based products ship with some version of Windows by default, and the end users may have to install Linux by themselves. While watching a Computex 2018 video on Armdevices.net, I found out FayTech, a company specializing in the design, development, manufacturing and marketing of touchscreen monitors & PCs, showed a 15″ Touch PC powered by an Intel Celeron J1900 “Bay Trail” processor and running Ubuntu 16.04 LTS. So I had a look on the company website, and the 15″ capacitive touch PC (FT15J1900W4G64GCAP) showcased in the video – embedded at the end of this article – comes with the following key features and specifications: SoC – Intel Celeron J1900 quad core processor @ 2.0 / 2.4 GHz with Intel HD Graphics; 10W TDP System Memory – 4GB DDR3L-1333 via 1x SO-DIMM slot, expandable to 8GB Storage – Industrial 64GB […]

July 18, 2018July 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$400 UGEE UG-2150 21.5″ Drawing Monitor Comes with a 2048-Level Pressure Sensitivity Pen

A few weeks ago, I wrote about a 7″ HDMI touchscreen display, and today when I first come across UGEE UG-2150 monitor, I thought I had found something similar but with a bigger display size. However, the 21.5″ monitor has a different target applications, and is specifically designed for drawing as it ships with a 2048-level pressure sensitivity stylus. UGEE UG-2150 monitor specifications: Display Resolution – 1920 x 1080 Colors – 16.7M Drawing / touch Pressure Sensitivity – 2048 levels Accuracy – 0.25 mm Report Rate – 220 reports/per second Response Time – 14ms Video Input – VGA, DVI, HDMI USB – 1x USB 2.0 port Power Supply – Yes… Dimensions Full device – 517x 321.89 x 30mm excluding the stand Active Area – 476.64 x 268.11mm The monitor ships with a P50S rechargeable pen, two pen holders, 8 different tips, a remove ring, a USB cable, a power adapter […]