Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Imagination Announces PowerVR Series2NX Neural Network Accelerator (NNA), and PowerVR Series9XE and 9XM GPUs

Imagination Announces PowerVR Series2NX Neural Network Accelerator (NNA), and PowerVR Series9XE and 9XM GPUs

Imagination Technologies has just made two announcements: one for their PowerVR Series2NX neural network accelerator, and the other for the new high-end GPU families: PowerVR Series9XE and 9XM. PowerVR Series2NX neural network accelerator The companies claims 2NX can deliver twice the performance and half the bandwidth of nearest competitor, and it’s the first dedicated hardware solution with flexible bit-depth support from 16-bit down to 4-bit. Key benefits of their solution (based on market data available in August 2017 from a variety of sources) include: Highest inference/mW IP cores to deliver the lowest power consumption Highest inference/mm2 IP cores to enable the most cost-effective solutions Lowest bandwidth solution with support for fully flexible bit depth for weights and data including low bandwidth modes down to 4-bit 2048 MACs/cycle in a single core, with the ability to go to higher levels with multi core The PowerVR 2NX NNA is expected to be […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on Maiwo K104c is a $9 2.5″ SATA Drive Enclosure with a USB Type C Cable

Maiwo K104c is a $9 2.5″ SATA Drive Enclosure with a USB Type C Cable

USB type C receptacles are found in more and more devices, but if you have older accessories or peripherals they likely use micro USB, and USB type A cables or plugs. One way to work around this problem is to get adapter, for example, I purchased a micro USB to USB Type C adapter last year, but this morning I’ve come across a USB type C hard drive enclosure, something I had not seen before, probably because I did not look for it. Maiwo K104c enclosure specifications: Designed for 2.5″ SATA drives (HDD/SSD) up to 9.5mm thick USB type C to SATA 3.0 interface using JMS567 chipset UASP protocol support (aka USB attached SCSI) OS agnostic so it should work with any operating systems Dimensions – 21.50 x 2.70 x 1.20 cm Weight – 130 x 79 x 17mm JMicron JMS567 chipset is the same as used in NanoPi NEO […]

Khadas Edge2 Arm mini PC
Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Firefly Introduces RK3399 CoreBoard with up to 4GB RAM, 128GB eMMC Flash

Firefly Introduces RK3399 CoreBoard with up to 4GB RAM, 128GB eMMC Flash

Firefly-RK3399 is a development board powered by Rockchip RK3399, and the company behind the board has now launched a system-on-module called RK3399 Coreboard with 2 to 4GB RAM, 8 to 128GB flash, a PMIC, and a 314-pin MXM 3.0 edge connector exposing various I/Os. RK3399 CoreBoard specifications: SoC – Rockchip RK3399 hexa-core big.LITTLE processor with dual core ARM Cortex A72 up to 2.0 GHz and quad core Cortex A53 processor, ARM Mali-T860 MP4 GPU with OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL and DX 11 support System Memory – 2GB or 4GB DDR3 Storage – 8, 16, 32 or 128 GB eMMC flash Carrier Board Interface – 314-pin MXM 3.0 edge connector with Ethernet, PCIe, HDMI 2.0, DP 1.2, MIPI DSI, eDP 1.3, S/PDIF, I2S, GPIO, USB, etc… signals Power Supply – 5V/3A input; RK808 PMIC Dimensions – 82 x 63 mm Weight – 24 grams The company provides support […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Intel NUC Roadmap 2018 – 2019 – Gemini Lake, Coffee Lake, and Kaby Lake H

Intel NUC Roadmap 2018 – 2019 – Gemini Lake, Coffee Lake, and Kaby Lake H

Intel’s new generation of Gemini Lake and Coffee Lake processors is expected to launch at the end of this year, beginning of next, and this morning I received Intel’s NUC roadmap that gives a good idea of what’s coming in 2018 and 2019. Intel plans a whole new generation of NUCs from “Hades Canyon VR” NUCxi7HVK model with a 100W Intel Core i7-xxxxK Kaby Lake-H processor to “June Canyon Celeron” NUC7CJYH model with a 10W Intel Celeron J4005 dual core “Gemini Lake” processor. All in all a total of 7 new NUCs should be launching in 2018. Let’s have a closer look at the cheaper and lower power Gemini Lake models, starting with “June Canyon Celeron” NUC7CJYH specifications: SoC – Intel Celeron J4005 dual core GLK processor (10W TDP) System Memory – 2x DDR4-2400 slots for up to 8GB RAM Storage – M.2 SSD slot, SDXC slot Display – 2x […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on TV030 is a $10 DVB-T Tuner for your Android Smartphone or Tablet

TV030 is a $10 DVB-T Tuner for your Android Smartphone or Tablet

We’ve previously covered tuners or small boxes that allow you to watch free-to-air TV on your smartphone or tablet with products such as PT115m/PT115e or DTV Link box, but I’ve just noticed GeekBuying added TV030 DVB-T tuner that connects to the micro USB port of your smartphone, and sells for just $10.99 shipped. TV030 TV mobile stick specifications: Signal: 75 Ohm Digital TV Aerial Input Punctured Codes: 1/2, 2/3, 3/4, 4/5, 5/6 and 7/8 Receive Frequency: DVB-T: 474 ~ 858 MHz (UHF) Input: DVB-T Bandwidth: 6/7/8 MHz Dimensions – 27 x 18 x 7mm; antenna: 210mm long max Weight – 14 grams The stick sells with an antenna, and a CDROM apparently containing the Android apk for EZTV app. It requires Android 4.1-5.0 or greater with the following minimal requirements to watch: SD TV – Cortex A8 @ 800 MHz with 512MB RAM, 20 MB flash, 800×480 display resolution HD […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Amlogic S805X Processor is Designed for Low Cost TV Boxes with 1080p H.264, H.265 and VP9 Video Support

Amlogic S805X Processor is Designed for Low Cost TV Boxes with 1080p H.264, H.265 and VP9 Video Support

The low end of the TV box market is now highly competitive with Rockchip and Amlogic battling to offer the cheapest solutions available, as we’ve seen in a recent factory price list of TV boxes with RK3229 based devices selling for as low as $17.8, and Amlogic S905W based boxes going for $17.5 and up (per unit) for orders of 200 pieces. Amlogic has been working on an even lower cost SoC with Amlogic S805X based on four Cortex A53 cores, the same Mali-450MP GPU, but no 4K support, and instead H.264, H.265 and VP9 video decoding up to 1080p60, as I found out in a document shared on Amlogic Open Linux website. Amlogic S805X will be quite similar to Amlogic S905X and S905D with the same CPU by clocked at a lower 1.2 GHz frequency, the same penta-core GPU, TrustZone support, and Fast Ethernet. The main difference is that […]

Intel Arc Graphics Technology
Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Rikomagic Introduces V3 TV Stick, MK39 TV Box, R3 Projector, and DS01 Digital Signage Player

Rikomagic Introduces V3 TV Stick, MK39 TV Box, R3 Projector, and DS01 Digital Signage Player

Rikomagic will launch four new Android devices this month with RKM V3 TV stick powered by Rockchip RK3328 processor, RKM MK39 TV box / mini PC based on Rockchip RK3399, RKM R3 projector with an octa-core processor, and DS01 digital signage player. RKM V3 TV Stick RKM V3 specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP2 GPU System Memory – 2 GB RAM Storage – 8 GB eMMC flash + micro SD card up to 32GB Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, MPEG-1/2/4, VP6/8 Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi, Bluetooth 4.2 USB – 1x USB 2.0 port, 1x USB 3.0 port Misc – IR receiver? (TBC) Power Supply – 5V/2A via power barrel jack The stick runs Android 7.1 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on uCAN CAN Ethernet Converter and Logger is Based on Orange Pi Zero Board

uCAN CAN Ethernet Converter and Logger is Based on Orange Pi Zero Board

The CAN bus is a serial communication protocol used in automotive and automation applications. The guys at ucandevices.pl have designed a solution around Orange Pi Zero board that allows you to log CAN bus data or act as a bridge between the CAN bus and Ethernet or WiFi. They call it “CAN Ethernet converter, CAN Logger, Linux CAN computer”. Sorry, no shorter name that I could find… uCAN (pronounced micro CAN) CAN Bus board specifications: Main Board – Orange Pi Zero with Allwinner H2+ quad core cortex-A7 processor, 256 MB RAM Network Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi Can Bus – 2-pin terminal block; support for CAN version 2.0 support Power Supply – DC 5V/2A via micro USB port Dimension – 50 x 50 x 20 mm The device comes pre-load with Debian distribution provided by Armbian plus various CAN tools. The getting started video below shows uCANTools web […]

Khadas VIM4 SBC