CNX Software - Embedded Systems News

March 21, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

NuMicro M2351 TrustZone Enabled ARM Cortex M23 MCU is Designed for Fingerprint Applications

ARM Cortex-M23 & M33 ARMv8-M cores were unveiled at ARM Techcon 2016 last October. They are the first MCU class cores to support TrustZone technology for better security, and one of the first micro-controllers to feature the technology is Nuvoton’s NuMicro M2351 Cortex M23 MCU designed for fingerprint applications. NuMicro M2351 MCU specifications Processor Core – ARM Cortex-M23 ARMv8-M core @ up to 48 MHz Memory – 96 KB embedded SRAM Storage – Up to 512 KB embedded flash with dual bank mode supporting OTA firmware update, 32 KB Secure Boot ROM Display IF – 8 COM x 40 SEG controller with internal charge pump for segment LCD panel Peripherals – UART, SPI, I²C, GPIOs, USB and ISO 7816-3 for smart card reader. Security features TrustZone Technology 8 Memory Protection Units (MPU) 8 Security Attribution Units (SAU) Implementation Defined Attribution Unit (IDAU) 2 KB OTP ROM with additional 1KB lock […]

March 20, 2017March 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

$32 Bluetooth 4.1 Audio Transmitter and Receiver Comes with S/PDIF Ports, a 3.5mm Audio Jack

As I browsed through DealExtreme new arrivals, I found a type of device I had not noticed in the past: a Bluetooth Audio transmitter and receiver that come with optical SPDIF input and output, as well as 3.5mm AUX port, and sells for $31.99 shipped on DX. Let’s have a look at the hardware first Audio In & Out – 3.5mm AUX port, SPDIF IN, SPDIF OUT Buttons – Tx/Rx mode selection, SPDIF/AUX selection, multifunction button Connectivity – Bluetooth 4.1 with 10 meters range; use aptX low latency audio Power Supply – 5V via micro USB port Battery – 350mAh rechargeable battery good for 15 hours on a charge; Charging time: 2 hours Dimensions – 6 cm x 6 cm x 1.84 cm The little device ships with a micro USB Cable for charging, a 3.5mm AUX cable, an optical TOSLINK cable, an RCA Cable, and a user manual. TX […]

March 20, 2017March 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Qualcomm 205 SoC is Designed for Entry-level 4G LTE Feature Phones Running Linux

Qualcomm has just introduced Qualcomm 205 “Mobile Platform” designed to bring 4G LTE connectivity and services to entry-level feature phones to emerging regions, such as India, Latin America, and Southeast Asia. The SoC features a dual core ARM CPU, an Adreno 304 GPU, and an LTE Cat 4 modem. Qualcomm 205 SoC specifications CPU – Dual Core ARM Cortex A7 processor at 1.1 GHz GPU – Qualcomm Adreno 304 GPU supporting OpenGL ES 3.0 Memory I/F – LPDDR2 & LPDDR3 up to 384 MHz Storage I/F – eMMC 4.5 flash Display – MIPI DSI up to 480p60 Cellular Connectivity X5 LTE modem supporting LTE Cat 4 with up to 150 Mbps download, 50 Mbps upload; Dual SIM card 2G, 3G and 4G support VoLTE support Connectivity – Support for 802.11 b/g/n & VoWIFI, Bluetooth 4.1, ANT+, FM radio, GPS/GLONASS/Beidou Camera – Dual 3MP camera support (rear + front) up to […]

March 20, 2017March 20, 2017 by Ray - 28 Comments

Xtream Codes IPTV Panel 2.4.2 Review – Part 4: Tutorial to Change the Main Server, Backup & Restore the Database

This is the fourth part of a review about Xtream Codes IPTV Panel, software to become your own content provider, and manage streams, clients, and resellers. The first three parts: Review of Xtream-Codes IPTV Panel Professional Edition – Part 1: Introduction, Initial Setup, Adding Streams… Xtream Codes IPTV Panel Review – Part 2: Movie Data Editing, Security, Resellers, Users and Pricing Management Xtream-Codes IPTV Panel Review – Part 3: Updates and New Features for Version 2.4.2 Main Server Change – Part 1: New Server Changing your Main Server could bring you troubles, if you do not know what you are doing. Many different reasons to change the Main server such as crashes, new one. making a Load Balancer to be a Main Server… Remember, it’s all about the existing backup, and you’ll restore your backup later, after successfully changing the Main Server. That is not difficult and everybody can do […]

March 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Intel Optane SSD DC P4800X is the First SSD based on 3D Xpoint Technology

3D Xpoint – pronounced “3D cross point” – was introduced in 2015 with the promise of delivering a 1000 times boost in performance and durability compared to NAND flash, and a density that 10 times better than DRAM. The next year, expectations were lowered quite a bit, when Intel presented a comparison between a high performance “NAND” SSD and a 3X point SSD prototype showing 7.23 times higher IOPS performance. The company has now launched its first 3D Xpoint product with Optane SSD DC P4800X with 375GB capacity. Optane SSD DC P4800X specifications: Capacity – 375GB Interface – PCIe 3.0 x4, NVMe Form Factor – Add-in-Card (AIC); Half-height, Half-length, Low-profile Latency (typical) R/W – <10μs Quality of Service (QoS) 99.999% 4kB 5 Random Queue Depth 1, R/W: <60/100 μs 4kB Random Queue Depth 16, R/W: <150/200 μs Throughput IOPS Random 4kB R/W – Up to 550/500k IOPS Random 4kB 70/30 […]

March 19, 2017March 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Mecool KM8 P Amlogic S912 TV Box Runs Android 7.1 Nougat, Sells for $39 and Up

We’ve already written about Android 7.1 on Amlogic earlier with week with an overview of the system and SDK from a developer, and there were some issues and user interface inconsistencies. However, I’ve just seen GeekBuying is now taking order for Amlogic S912 powered Mecool KM8 P TV box running Android 7.1 for $38.99 and up. Mecool KM8 P specifications: SoC – Amlogic S912 octa-core ARM Cortex A53 processor @ up to 1.5 GHz with ARM Mali-820MP3 System Memory – 1 or 2GB DDR3 Storage – 8 or 16GB eMMC flash and micro SD slot up to 32GB Video & Audio Output – HDMI 2.0a up to 4K @ 60Hz with CEC and HDR support, and 3.5mm AV port (composite + stereo audio) Connectivity – 10/100M Ethernet, WiFi 802.11 b/g/n USB – 2x USB 2.0 ports Misc – IR receiver, status and network LEDs Power Supply – 5V/2A Dimensions – […]

March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

UP Core is a Low Cost & Compact Intel Maker Board Powered by an Atom x5-Z8350 SoC (Crowdfunding)

The UP community has already launched Intel Cherry Trail and Apollo Lake boards in the past with UP Board and UP2 (squared) boards, and they are now about to launch a cheaper and smaller board called UP Core powered by Intel Atom x5-Z8350 processor with to 1 to 4GB memory, up to 64GB eMMC flash, HDMI, USB 3.0, … and I/O expansion connectors. UP Core specifications: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad core processor @ 1.44 GHz / 1.92 GHz (Burst frequency) with Intel HD 400 graphics @ 200 / 500 MHz System Memory – 1, 2 or 4 GB DDR3L-1600 (soldered on board) Storage – 16, 32, or 64 GB eMMC flash, SPI flash ROM Video Output / Display – HDMI 1.4 port, full eDP (embedded DisplayPort) connector Audio I/O – Via HDMI, and I2S Connectivity – 802.11 b/g/n WiFi @ 2.4 GHz, Bluetooth 4.0 LE (AP614A) […]

March 17, 2017March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$18.9 Orange Pi Zero Plus 2 Board: Allwinner H3, WiFi + Bluetooth LE, HDMI and 8GB eMMC Flash

When will they ever stop? Shenzhen Xunlong has launched yet another Allwinner H3 board called Orange Pi Zero Plus 2, that has not that much in common with Orange Pi Zero, since it uses a different processor (H3 vs H2+), adds HDMI, and implements WiFi and BLE via an Ampak AP6212 module.Orange Pi Zero Plus 2: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 512 MB DDR3 SDRAM Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI port with CEC support Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212) with u.FL antenna connector and external antenna USB – 1x micro USB OTG port Camera – MIPI CSI port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header with headphone, 2x USB 2.0, TV out, microphone and […]