satellite News - Page 6 of 8 - CNX Software

November 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Outernet Introduces Standalone & DIY Internet Satellite Kits for C.H.I.P Board, Raspberry Pi 3 Board, and Laptops

Outernet goal is to bring knowledge and/or emergency info to places without Internet either to remote places, or where Internet has been temporary shutdown due to natural disasters or political reasons through a satellite feed. In some ways, it works like a typical FM radio, but instead of receiving audio, you’ll get data. The first hardware was based on WeTek Play TV box, and called Lighthouse, but they now have a DIY kit that will work with Next Thing C.H.I.P, Raspberry Pi, or Laptops running Windows 7/10 or Linux, as well as a standalone Outernet Satellite kit including C.H.I.P Allwinner R8 development board. Let’s first check out “Basic Outernet DIY Kit” comprised of three items: L-Band Antenna Frequency: 1525 – 1559 MHz (Center frequency: 1542 MHz) 8dbi 4″ SMA Male connector Dimensions – 12 cm x 12 cm x 1.5 cm Weight – ~100 grams RTL-SDR Blog Software Defined Radio/Tuner […]

October 19, 2016October 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Ferguson Ariva 4K Android STBs Come with Digital TV Tuners, a Pay TV Card Reader, and a SATA Bay

We already have a choice of Android TV boxes with digital TV tuners (DVB-T2, DVB-S2, ATSC…) with devices like K1 Plus T2 S2, U4 Quad Hybrid, and Wetek Play 2, but Ferguson, a company based in Poland, has two other options based on Amlogic S905 processors with their Ariva 4K and Ariva 4K Combo with one or two tuners, a Pay TV card reader which is not available on competitors’ models, and 2.5″ HDD bay in the bottom of the case implemented via a USB 2.0 to SATA bridge. Ariva 4K & 4K Combo specifications: SoC – Amlogic S905-B quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB eMMC flash + slot for HDD mounting (on the bottom) + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz and AV port Audio […]

August 26, 2016August 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 247 Comments

VideoStrong KII Pro Android Set-top Box with DVB-T2 & DVB-S2 Tuners Comes with 2GB RAM

Based on the number of comments I get daily on my review of Videostrong K1 Plus T2 S2 Android TV box, the device is rather popular thanks to its dual DVB-T2/T2C and DVB-S2/S tuner, its low price, and OpenELEC community support. However, some people are possibly affected by the mere 1GB RAM in the system, with some apps being killed during use due to lack of memory. One solution is to purchase WeTek Play 2, but at $120 it’s in a different price range, and does not offer a dual tuner solution. But Videostrong has recently launched their KII Pro DVB T2+S2 model based on K1 Plus DVB T2+S2, but with 2GB RAM, 16GB storage, and 802.11ac WiFi. KII Pro specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 16GB eMMC flash + […]

August 19, 2016August 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 51 Comments

WeTek Play 2 4K Android Set-top Box with ATSC, DVB-S2 or DVB-T2 Tuners is up for Pre-order for $120

With WeTek Play 2, initially unveiled as WeTek Play+, we now have a successor to WeTek Play with the same ATSC, DVB-S2/S, DVB-T2/T/C tuners, but much better specs thanks to Amlogic S905-H processor, 8GB storage, 2GB memory, and support for HDMI 2.0 and 4K60Hz video decoding allowing you to watch 4K UHD channels via your satellite dish for example. The device can be pre-ordered for $119.90 with the tuner of your choice, and shipping is slated to start on September 6th. WeTek Play 2 specifications have changed slightly since January: SoC – Amlogic S905-H rev. C quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2 GB DDR3 Storage – 8 GB eMMC 5.0 flash + micro SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with HDCP 2.2 support Audio – HDMI, optical S/PDIF Video codecs […]

June 17, 2016June 19, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

S204 Android Set-top box with DVB-T2/C & DVB-S2 Tuners is Powered by Allwinner H3 Processor

So far, I had only seen Android TV box with digital TV tuner using Amlogic or HiSilicon solutions, but S204 Android set-top box differs, as it is powered by Allwinner H3 quad core Cortex A7 processor, and includes DVB-T2/C (Terrestrial and cable TV) and DVB-S2 (satellite TV) tuners. AFAIK, Allwinner H3 does not include any TS interfaces, so they must have used USB tuner chip(s) [Update: Allwinner H3 does have a Transport Stream interface as per the datasheet, but it’s not really advertised by Allwinner] S204 TV box specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2/1.3 GHz with Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB flash + micro SD slot Video Output – HDMI 1.4 up to 4K @ 30 Hz + AV (composite) Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Tuners Support HD DVB-S2, DVB-T2 and DVB-C; Support for BISS,CCCAM, […]

March 25, 2016July 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Stream Live TV to Your Computer or Smartphone with U4 Quad Hybrid Android TV Box, Kodi and TVheadend

TVheadend is a streaming server and recorder for Linux, FreeBSD and Android supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, ISDB-T, IPTV, SAT>IP and HDHomeRun as input sources, and while in theory it should be possible to configure any recent Android TV set-top box with digital TV tuners, configuration is complex, and there’s no guarantee the tuner will be recognized. However, the manufacturer of U4 Quad Hybrid has already configured their box to support HTSP clients, so I’ve installed the latest firmware, and given it a try with my Android smartphone running Kodi 15.2 with TVheadend HTSP client, and I could successfully stream live TV (DVB-T2 free-to-air channels) to my smartphone. Once you’ve scanned the channels using DVB-T2 and/or DVB-S2, there’s no other configuration in U4 Quad Hybrid TV box, but you’ll still need to find out your IP address by going to Setup->Network, and WiFi, Ethernet or 3G depending on your […]

February 28, 2016November 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 231 Comments

Review of K1 Plus Android TV Box with Combo DVB-S2/DVB-T2 Tuner

VideoStrong has launched K1 Plus TV box powered by Amlogic S905 processor last year, and I had the chance to review their model last November. But here I am reviewing K1 Plus again. Why? That’s because the company’s has several K1 Plus models: the “standard” version that’s just like any Android TV boxes, and the DVB version with DVB-S2, DVB-T2/C, or DVB-T2/C + DVB-S2 combo, and the latter is the one I’m reviewing today. K1 Plus DVB combo teardown revealed that the main board was exactly the same as K1 Plus “standard”, and that only a tuner card was added. So I’ll have a two part review with the first part checking if they fixed any of the bugs found on K1 Plus “Standard” with “November 2015” firmware in the new “January 27, 2016 DVB” firmware, and the second part will focus on testing DTV app with DVB-S2 and DVB-T2, […]

February 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 119 Comments

How to Configure DVB-S2 and DVB-T2 Tuners in K1 Plus Android DTV Receiver

I have previously reviewed VideoStrong K1 Plus Android TV box, but the company also has another model with the exact same name “K1 Plus” that includes a combo DVB-S2 & DVB-T2 tuner. That’s rather confusing, but nevertheless, since I now have the tuner version of the device, I’ve installed the latest firmware, started to play with it, and today I’ll explain how to configure DTV app for both satellite and terrestrial digital TV reception. Hardware Setup and DTV App The first step is to connect both your satellite dish and indoor or outdoor TV antenna to the device, as well as all necesarry cables, and possibly a USB hard drive if you want to use PVR function. Now go to the list of apps start DTV app, or press the DTV button on the remote control. Each time the app starts you’ll be asked to select DVBT2 or DVBS2, and […]